*-TOTAL BYTES=247 *-Date: 2/19/97 *-Version: RSS 5200 *-***************************************** *- Rockwell PRO Utility V1.13 2/19/97 * *-***************************************** ************************************************* *WA10AM for 10 bit address decoding audio with modem and no CDROM *To be used with Win 95 driver version 2.33 or higher *Shared IRQ for WA, SB, and MPU401 *10/22/96 *Added SB choices for SCT test *Wide open choice IO from 220-280 *Remove modem and MPU401 choices to fit *10/29/96 *Optimal SB IRQs = 5,7 *11/06/96 *Removed IRQ5,7 from Modem *11/12/96 *Removed IRQ11,15 from Modem 0 and 1 ************************************************* 4A 73 52 00 *======================================= * Vendor ID: RSS 5200 * Serial Number: FFFFFFFF * PNP Version: 1.0 * Rockwell Version: 0.0 * ANSI ID String: 'WaveArtist' * (LSB Length: Ah MSB Length: 0h) * * Checksum (LFSR) = DCh *======================================= FF FF FF FF DC 0A 10 00 82 0A 00 57 61 76 65 41 72 74 69 73 74 *======================================= * Logical Device ID = RSS 5000 * {WAVE ARTIST WAVE AUDIO} * * I/O Range Check Enabled * Supported registers: 0x31 * -May not participate in boot process *--------------------------------------- * * DMA Channels = 5 6 7 * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0250h * Max Base Address=03F0h * Alignment=10h Range=10h *======================================= 15 4A 73 50 00 02 2A E0 02 47 00 50 02 F0 03 10 10 *======================================= * Logical Device ID = RSS 5001 * {SOUND BLASTER} * * I/O Range Check Enabled * Supported registers: 0x31 * -May not participate in boot process *--------------------------------------- * *______Dependent Function 0 ______ * [Optimal Configuration] * * DMA Channels = 1 * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0220h * Max Base Address=0220h * Alignment=01h Range=10h * * I/O Port Descriptor 1 : * 10 bit address decode * Min Base Address=0388h * Max Base Address=0388h * Alignment=01h Range=04h * * IRQs= 5 7 * *______Dependent Function 1 ______ * [Acceptable Configuration] * * DMA Channels = 1 * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0240h * Max Base Address=0240h * Alignment=01h Range=10h * * I/O Port Descriptor 1 : * 10 bit address decode * Min Base Address=0388h * Max Base Address=0388h * Alignment=01h Range=04h * * IRQs= 5 7 10 * *______Dependent Function 2 ______ * [Sub-Optimal Configuration] * * DMA Channels = 0 1 3 * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0220h * Max Base Address=0280h * Alignment=20h Range=10h * * I/O Port Descriptor 1 : * 10 bit address decode * Min Base Address=0388h * Max Base Address=03F0h * Alignment=04h Range=04h * * IRQs= 5 7 10 11 *======================================= 15 4A 73 50 01 02 31 00 2A 02 08 47 00 20 02 20 02 01 10 47 00 88 03 88 03 01 04 22 A0 00 31 01 2A 02 08 47 00 40 02 40 02 01 10 47 00 88 03 88 03 01 04 22 A0 04 31 02 2A 0B 08 47 00 20 02 80 02 20 10 47 00 88 03 F0 03 04 04 22 A0 0C 38 *======================================= * Logical Device ID = RSS 5002 * {MPU-401 MIDI} * * I/O Range Check Enabled * Supported registers: 0x31 * -May not participate in boot process *--------------------------------------- * *______Dependent Function 0 ______ * [Optimal Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0330h * Max Base Address=0330h * Alignment=01h Range=04h * *______Dependent Function 1 ______ * [Acceptable Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0300h * Max Base Address=03F0h * Alignment=10h Range=04h *======================================= 15 4A 73 50 02 02 31 00 47 00 30 03 30 03 01 04 31 01 47 00 00 03 F0 03 10 04 38 *======================================= * Logical Device ID = RSS 0160 * {MODEM} * * I/O Range Check Enabled * Supported registers: 0x31 * -May not participate in boot process *--------------------------------------- * *______Dependent Function 0 ______ * [Optimal Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=03E8h * Max Base Address=03E8h * Alignment=01h Range=08h * * IRQs= 3 4 5 7 10 11 15 * *______Dependent Function 1 ______ * [Optimal Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=02E8h * Max Base Address=02E8h * Alignment=01h Range=08h * * IRQs= 3 4 5 7 10 11 15 * *______Dependent Function 2 ______ * [Acceptable Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=03F8h * Max Base Address=03F8h * Alignment=01h Range=08h * * IRQs= 4 * *______Dependent Function 3 ______ * [Sub-Optimal Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0100h * Max Base Address=03F8h * Alignment=08h Range=08h * * IRQs= 3 4 5 7 10 11 15 *======================================= 15 4A 73 01 60 02 31 00 47 00 E8 03 E8 03 01 08 22 B8 8C 31 00 47 00 E8 02 E8 02 01 08 22 B8 8C 31 01 47 00 F8 03 F8 03 01 08 22 10 00 31 02 47 00 00 01 F8 03 08 08 22 B8 8C 38 *======================================= * Logical Device ID = RSS 5003 * {CDROM} * * I/O Range Check is Not Enabled * -May not participate in boot process *--------------------------------------- * *______Dependent Function 0 ______ * [Optimal Configuration] * * IRQs= *======================================= 15 4A 73 50 03 00 30 22 00 00 38 *======================================= * Logical Device ID = RSS 5004 * {GAME PORT} * * I/O Range Check Enabled * Supported registers: 0x31 * -May not participate in boot process *--------------------------------------- * *______Dependent Function 0 ______ * [Optimal Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0201h * Max Base Address=0201h * Alignment=01h Range=01h * *______Dependent Function 1 ______ * [Acceptable Configuration] * * I/O Port Descriptor 0 : * 10 bit address decode * Min Base Address=0208h * Max Base Address=020Fh * Alignment=01h Range=01h *======================================= 15 4A 73 50 04 02 31 00 47 00 01 02 01 02 01 01 31 01 47 00 08 02 0F 02 01 01 38 79 85 * CheckSum:Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.