Hewlett-Packard LaserJet 8150 Series Printer Printing System Late Breaking Readme The Late-Breaking Readme file contains information that may impact the installation and use of your HP LaserJet 8150 printer. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * Readme File Contents: I. Introduction --New Software Features in the HP LaserJet 8150 printer --Who needs this software? --Overview of the Printing System software components II. Late Breaking Information --Known issues and workarounds III Technical Assistance IV. Legal Statements --Trademark notices --Software license and copyright ************************ I. INTRODUCTION ************************ This Readme file provides specific information you should know before you install and use the Printing System. Information and Known issues are provided for the following operating systems: -Windows 2000 -Windows NT 4.0 -Windows 95/98/Millennium -Windows 3.1x This file provides specific compatibility, and troubleshooting information. For additional information on the printer features and driver features, refer to the online help included with each software component and the printer user guide. NEW SOFTWARE FEATURES IN THE HP LASERJET 8150 PRINTER The HP LaserJet 8100 printer introduced Job Retention features that required the use of an EIO hard disk. Job Retention in RAM allows the user to use the "Private Printing" and "Proof and Hold" features of Job Retention without having an EIO hard disk installed. A Stand Alone Status utility is enabled when the user has installed bi-directional communication (the default) with the printer driver(s). This tab allows the user to see current printer information, such as the Control Panel message, toner cartridge status and paper tray status. Back Cover allows the user to include a blank back cover on a document, or to include a back cover from a different paper source than the rest of the document. The first page can also be selected from an alternate paper source. Edge-to-Edge Printing allows the user to print within 2mm of the edge of the page. WHO NEEDS THIS SOFTWARE? This Printing System software is required to operate an HP LaserJet 8150 Series. Network clients will need the installation CD, or the name of the appropriate network directory, to install the software on their individual workstations. OVERVIEW OF THE PRINTING SYSTEM SOFTWARE COMPONENTS The printer CD has software for PC systems and Apple Macintosh (and compatible) systems. For more information about a particular driver or software component, see its associated online help. For Macintosh-specific information, please refer to the Macintosh Late Breaking Readme on the Macintosh partition of the installation CD. Network Administrator Software Components HP Web JetAdmin HP Web JetAdmin is a tool, which allows the network administrator to configure and manage HP printers across a variety of operating systems. ***NOTE: HP JetAdmin is no longer provided. Network Administrators may get HP Web JetAdmin at the following URL: http://www.hp.com/net_printing/ppss/wja_info.html HP LaserJet Utility for Macintosh OS The HP LaserJet Utility for Macintosh OS is a tool, which allows the network administrators to configure and manage HP printers on the Macintosh OS. HP Resource Manager The HP Resource Manager is a tool which allows you to manage fonts and macros for multiple printers. It supports TrueType, Type 1, bitmap fonts and macros. End-User Software Components Drivers A printer driver is a software program that enables your software applications to access your printer's features. Typically, you should install a printer driver for each printer. The CD includes the following printer drivers. -Windows 3.1x, Windows 95/98/Millennium, Windows NT 4.0, and Windows 2000 -PCL 6 and PCL 5e drivers, all having a common-looking Graphical User Interface. -Microsoft PScript driver using PPD files. -Adobe PPD files for Mac OS System 7.5 or greater. -OS/2 PCL and PS drivers. -AutoCAD R15 and DOS drivers. Additional drivers may be available from your Hewlett-Packard distributor or from electronic channels. See Section IV, "Technical Assistance," in this Readme or your user guide for more information on obtaining drivers and other HP software. Software Components The Printing System also includes the following software component for end-users: Stand Alone Status Stand Alone Status provides printer and job status such as jobs waiting to print, toner and paper levels, and the ability to view the control panel. This utility can be configured to pop up when attention is needed at the printer. The latest printer drivers and printing software for HP LaserJet printers are available on the Internet (http://www.hp.com). The installer automatically detects if you have Internet access, and asks if you want to check the HP Internet site for the latest drivers. If the printer drivers or printing software has been updated since your CD was created, the installer will then install from the Internet. ************************************************ II. Known Issues ************************************************* _________________________________________________________________ CD Browser __________ Issue: When using the Customization Utility to create a custom printing system the floppy drive destination is not available. Description: When using the Customization Utility to create a custom printing system only the "Copy Printer Drivers Only" selection will allow the use of a floppy drive as a destination. When selecting "Create Customized Installer" or "Copy Entire Printing System Installer" from the Customization Utility, only local or network hard drives can be selected. _________________________________________________________________ Issue: When installing the printing system software using a custom disk set created with the Customization Utility the following error occurs; "Setup is unable to find _SETUP.DLL, which is needed to complete the installation. Error 103" Description: When installing from a customer printing system the language selection must match the language selection when the custom printing system was created. The custom installation program will prompt the user for a language selection. If the language selected during installation is different from the language selected during the creation of the custom printing system the above error will occur. The custom printing system installer created with the Customization Utility only contains the language that was selected during the creation of the custom printing system therefore the correct language must be selected when using the custom installer. Workaround: Verify the same language selection is used during the creation and use of the custom installer. _________________________________________________________________ Printing System Installer _________________________ Hard Disk Free Space Requirements: Before installing the printing system software verify there is at least 20MB of free disk space available for the installation of the software. _________________________________________________________________ Issue: Cannot cancel the printing system installer after file copy has begun. Description: There is no cancel button available when the printing system installer is copying file and updating the system. The cancel button is not available because cancellation during the file copy or system update processes could leave the user's system in an unknown state. Also do not "End Task" or power down the computer during the file copy and system update process. Workaround: Complete the printing system installation then use the printing system uninstaller located in the HP LaserJet 8150 programs folder to uninstall the printing system. After the uninstall process is complete the printing system installer may be re-run with the user's new selections. _________________________________________________________________ Issue: User does not receive a response when trying to run the installer setup.exe file. Description: The installation program checks for a minimum of 7MB of free disk space on the computer before starting the installation of the software. If there is not at least 7MB of free disk space the installer will not start and no error messages or warnings will be displayed. Workaround: Verify there is at least 20MB of free disk space available for the installation of the software. _________________________________________________________________ Printing System Uninstaller ___________________________ Issue: The printing system uninstaller does not completely uninstall the printing system software. Description: If the printing system installer is used to install more than one language on the same system, only the files and components from the last installation will be removed. The printing system installer only stores one uninstallation file per system. Workaround: Uninstall the printing system for one language before installing the printing system for a second language. _________________________________________________________________ Parallel and USB Support ________________________ Issue: Some advanced features of the LJ8150 printing system are not supported over a parallel or USB printer connection. Description: Printing system components that require Bi-directional functionality are not supported over parallel or USB printer connections. The components that are not supported over parallel or USB are; Driver Autoconfiguration Update Now Job Status and Alerts Workaround: This functionality will be added in a future release of the printing system software for the LJ8150. _________________________________________________________________ Job Retention _____________ Issue: PIN number settings for Job Retention feature works differently in the PostScript Environment from previous products. Previous instructions to set a PIN number: To print a private job using the PostScript driver the user had choose one of the 50 predefined PIN numbers (20 for Win9x) from the "PIN (for Private Job)" drop down menu. Enhanced way to set PIN numbers: To print a private job using the PostScript driver the user can choose a PIN number between 0000 and 9999 by selecting a value between 0 and 9 for each PIN digit. For example, to choose 1579 as a PIN number, select the following: PIN Digit 1 (for Private Job): 1 PIN Digit 2 (for Private Job): 5 PIN Digit 3 (for Private Job): 7 PIN Digit 4 (for Private Job): 9 _________________________________________________________________ Printer Drivers _______________ Issue: Job Retention, Proof and Hold Prints all of the copies of a print job. Description: Some applications may send each copy of a print job as separate job from the application. Workaround: Uncheck the Collation feature in the application. _________________________________________________________________ Issue: User cannot print on the backside of first sheet when duplexing with "Use Different Paper" for first page. Description: The printing system does not allow for this capability at this time. This functionality may be added in future products. _________________________________________________________________ Issue: Using Windows NT4 and the PCL5e printer driver, text may be clipped on the left margin of the page when using the Edge-to-Edge feature. Workaround: Print the document using the PCL 6 printer driver. _________________________________________________________________ Issue: When printing a duplexed document with multiple copies the second copy prints on first copy's last page instead of separate page. Description: This is a known issue with several applications. For example an application sends a 3 page, 2-copy job as one 6-page document. When print data is sent to the printer in this manner the driver cannot distinguish that it is really 2 copies of the same print job. Workaround: Turn on "Ignore Application Collation" in the printer driver and turn off collation in the application print dialog box. _________________________________________________________________ Issue: PNG graphic images do not print with the current version of Netscape Navigator (4.73). Description: Netscape does not support PNG images by default. A PNG plug-in must be downloaded from Netscape and installed into the browser. Workaround: Download and install the PNG plug-in from Netscape. _________________________________________________________________ Bi-Directional Functionality ____________________________ Description: When running the HP Port Resolver, Bi-Directional functionality, from an NT4 client machine to a remote printer connected via an NT4 share, one of the following problems may occur: 1. When the clicking the printer driver "Update Now" button - a "printer communication error" is posted. 2. When using the Job Status and Alerts utility - a broken connection is displayed. 3. When using the porttest.exe test utility - the error code 0x80070005 is returned. Solution: If an "Update Now" or "Stand Alone Status" from an NT4 client, fails to communicate with a printer on a remote NT4 share check that the Network -> Services -> RPC Configuration service is correctly installed on both the client AND host (print server) machines and that the RPC "Name Service Provider" field (click RPC - "Properties" to view this info) is set to "Windows NT Locator". W9x and W2K are not affected by this problem, only WNT4. _________________________________________________________________ Job Status and Alerts _____________________ Supported Operating Systems and Environments: Job Status and Alerts are Supported on Windows 95 with Internet Explorer 4 or higher, Windows 98, Windows ME, Windows NT and Windows 2000. Job Status and Alerts are not supported for Terminal Server. Job Status and Alerts functionality is available for printers connected over the network from the client. Job Status and Alerts are not supported over a parallel connection. Device Status requires Internet Explorer version 4 or greater. _________________________________________________________________ Issue: Device Status stops responding and print job icons freeze. Description: When Job Status and Alerts is tracking a large amount of print jobs Device Status may stop responding and icons may not be removed from the Job Status and Alerts window. Workaround: Download updated Job Status and Alerts software when available from HP.com _________________________________________________________________ Issue: Job status does not work when using Novell Client on a Windows NT or Windows 2000 client. Workaround: Download updated Job Status and Alerts software when available from HP.com _________________________________________________________________ Issue: Multiple copies of the same print job show up in the Job Status and Alerts window as separate jobs. Description: Some applications send each copy of a print job as a separate job therefore Job Status and Alerts will represent each copy as a separate job. Workaround: Turn off Job status when using applications that send each copy of a print job as a separate job. _________________________________________________________________ Install Network Printer Wizard ________________________________ Issue: Port name over 63 characters, port creation fails. Description: If a user chooses to change the port name and uses a new name over 63 characters, the port creation will fail. A dialog pops with the following message "There was an error creating the port. Please refer to the Read Me file about how to create network Printer Ports. The printer will be setup to the local printer port." The driver installation finishes, and the printer is setup to print to LPTx. Workaround: Run the installer again and type in a name less than 63 characters. _________________________________________________________________ Issue: IP Address set via "Suggest Settings" and printer creation fails. Conditions required: PC configured with TCP/IP only and a Dial Up Adapter, printer has an assigned IP address, user performs specific device search by hardware address. Description: After the printer is discovered via the hardware address, on the IP Settings screen, the user can choose the "Suggest Settings" option. If user uses the Suggest Settings option (auto net), the installation continues as though the installer is assigning an autonet address to the printer, however, the installation will fail and IP on printer will not be written. Workaround: Do not change the IP Address via the "Suggest Settings" option. _________________________________________________________________ Issue: No default queue name suggested by Install Network Printer Wizard. Description: Each time the Install Network Printer Wizard is run on different workstations a new queue is created. The first 8 installs, Install Network Printer Wizard will suggest a default queue name incrementing by _q2, _q3... This is successful until the 9th queue. When the 9th queue should be created, instead of creating the queue, the queue name field is left blank. Workaround: User can then type in the name of the queue. Additional Information: User should be using Add Printer or the appropriate installer to attach to an existing queue rather than using the Install Network Printer Wizard to create a new queue for each workstation. If the user desires a new queue for each workstation, they will have to type in a new queue name. _________________________________________________________________ ************************************ III. TECHNICAL ASSISTANCE ************************************ Some of the services below are provided for the United States only. Similar services to those listed below are available in other countries. See your printer's user guide or call your local authorized HP dealer. CUSTOMER SUPPORT See your printer's user guide or call your local authorized HP dealer. INTERNET Anonymous FTP library service is available worldwide for around-the-clock-access to drivers and technical support information for HP peripheral and computer products. Please note that paths may change without notice. Access the Internet or FTP address and use the menus to locate the software or support of your choice. -URL for HP LaserJet 8150 Series Support: http://www.hp.com/cposupport/nonjsnav/hplaserjet5940.html -URL for Software and Support: http://www.hp.com/ go/support -URL for Access HP: http://www.hp.com -FTP address: ftp.hp.com Login: anonymous Password: your Internet email address HP SOFTWARE AND SUPPORT SERVICES - ADDITIONAL INFORMATION Refer to your printer user guide for additional methods of obtaining software and support information, such as printer driver distribution centers, other online services, fax services, and other online support. ********************************* IV. LEGAL STATEMENTS ********************************* TRADEMARK NOTICES -MS-DOS, Windows, PScript and Internet Explorer are registered trademarks of the Microsoft Corp. -OS/2 is a registered trademark of IBM Corporation. -Macintosh and Mac OS are registered trademarks of Apple Computer, Inc. -PostScript is a registered trademark of Adobe Systems, Incorporated. - Netscape is a registered trademark of Netscape, Inc. SOFTWARE LICENSE AND COPYRIGHT Information provided in this document and software for the Hewlett-Packard LaserJet 8150 Series printer is provided "as is." No implied warranties of merchantability and or fitness for a particular purpose are given. The HP LaserJet 8150 Series printing system may be copied and distributed only to users of an HP LaserJet 8150 Series printer. All files on the CD must be copied without modification. All components of the HP LaserJet 8150 Series printing system must be distributed together. The HP LaserJet 8150 Series printing system may not be distributed for profit. Copyright (c) 1990-2000 Hewlett-Packard Company. Copyright (c) 1985-1990 Microsoft Corp. All Rights Reserved.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.