; if there are more than 1 printer supported, the entry for SupportedPrinters should be ; SupportedPrinters = HP Kepler Printer,HP Escher Printer [SetupInfo] ProductName=PRODUCT_NAME_HPW8 HelpFileName=SETUP.HLP EnableCheckWeb=NO ProductNameUntranslated=PRODUCT_NAME_HPW8_UNTRANSLATED [PrinterInfo] SupportedPrinters = HP DeskJet 1220C Printer [ApplicationInfo] 0=OpusApp 1=WordPadClass 2=MSPaintApp [HP DeskJet 1220C Printer] DeviceIDModel = DESKJET 1220C DriversSupported.32 = DriversSupported.16 = PCL3DriverInfo.16 [PCL3DriverInfo.32] DriverName = HP DeskJet 1220C Printer Environment = Windows NT x86 DriverFile = HPW8KMD.DLL ConfigFile = HPW8UMD.DLL DataFile = HPW8KMD.DLL DataType = RAW MonitorName = NULL Divid = HPW8 Component = PCL3 Driver FileGroup = PCL3 Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = PCL3DriverInfo.16 DrvLang = PCL3 CDDirectory=pcl3\winnt Display=8100 DefaultPrinter=YES [PCL3DriverInfo.16] DriverName = HP DeskJet 1220C Printer Environment = Windows 4.0 DriverFile = HPW8DDI.DRV ConfigFile = HPW8DDI.DRV DataFile = HPW8DDI.DRV DataType = EMF MonitorName = NULL Divid = HPW8 DataFile = HPW8DDI.DRV Component = PCL3 Driver FileGroup = PCL3 Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = NULL DrvLang = PCL3 CDDirectory=pcl3\win9x Display=8101 DefaultPrinter=YES [PSDriverInfo.32] DriverName = NOTUSED Environment = Windows NT x86 DriverFile = PSCRIPT.DLL ConfigFile = PSCRPTUI.DLL DataFile = HPWP7NT.PPD DataType = RAW MonitorName = NULL Divid = NULL Component = PS Driver FileGroup = PS Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = PSDriverInfo.16 DrvLang = PS CDDirectory=ps\winnt Display=8104 DefaultPrinter=NO [PSDriverInfo.16] DriverName = NOTUSED Environment = Windows 4.0 DriverFile = PSCRIPT.DRV ConfigFile = PSCRIPT.DRV DataFile = PSCRIPT.DRV DataType = EMF MonitorName = PostScript Language Monitor Divid = NULL Component = PS Driver FileGroup = PS Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = NULL DrvLang = PS CDDirectory=ps\win9x Display=8105 DefaultPrinter=NO [PCL5DriverInfo.32] DriverName = NOTUSED Environment = Windows NT x86 DriverFile = HPBFEF2.DLL ConfigFile = HPBFEF0.DLL DataFile = HPBFEF31.PMD DataType = RAW MonitorName = NULL Divid = NULL Component = PCL5 Driver FileGroup = PCL5 Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = PCL5DriverInfo.16 DrvLang = PCL5 CDDirectory=pcl5\winnt Display=8102 DefaultPrinter=NO [PCL5DriverInfo.16] DriverName = NOTUSED Environment = Windows 4.0 DriverFile = HPBFEBF.DRV ConfigFile = HPBFEBF.DRV DataFile = HPBFEB31.PMD DataType = EMF MonitorName = HP LaserJet 5 Language Monitor Divid = NULL Component = PCL5 Driver FileGroup = PCL5 Driver files PrintProcessor = winprint AddPrinterIcon = TRUE 16bitDriver = NULL DrvLang = PCL5 CDDirectory=pcl5\win9x Display=8103 DefaultPrinter=NO [NULL] MonitorFile = NULL [NULL] MonitorFile = NULL [PostScript Language Monitor] MonitorFile = PSMON.DLL [HP LaserJet 5 Language Monitor] MonitorFile = HPDCMON.DLL [NULL] MonitorFile = NULL ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; Component information ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [Components] Values=Toolbox,INPW,win98usb,readme [INPW] CDDirectory=inpw Optional=NO [win98usb] CDDirectory=win98usb Optional=NO [win2kusb] CDDirectory=win2kusb Optional=NO [readme] CDDirectory=docs Optional=NO ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; Toolbox component's customization ; to specify which OS is not supported, use the following format OSNotAvailable=WIN2000,WINNT4,WIN9X ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [Toolbox] AllowedSelection=<DIRECTORY>,<PROGRAMGROUP>,<DESKTOPSHORTCUT> DirectoryQuery=Toolbox.Directory ProgramGpQuery=Toolbox.Program ProgramGroup=PRODUCT_NAME_HPW8 DIRECTORY=ESCHER_TBX_STR InstallExe=setup.exe CommandLine=/p<PROGRAMGROUP> /w<DIRECTORY> /n<INSTALLNAME> /a<INSTALLDESKTOPFLAG> /s /f1<RESPONSE> UnInstallInfo=Toolbox.Uninstall ReponseFile=setup.iss CDDirectory=toolbox Optional=YES OSNotAvailable=WIN2000 DISPLAY=8200 [Toolbox.Directory] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Toolbox KeyValueName=Executable CommandLine=""-i "" ""-j "" WAIT=NO INFOTYPE=REG [Toolbox.Program] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Toolbox KeyValueName=ProgramGroup [Toolbox.Uninstall] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\HPW8 Toolbox KeyValueName=UninstallString CommandLine=-n<PRODUCTNAME> ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; Configuration information ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [HP DeskJet 1220C Printer.Config] 0=EnableManualDuplex [EnableManualDuplex] Available=YES DISPLAYTEXT=ENABLEMANDUPLEX_TXT DefaultValue=YesValue COUNT=2 [EnableManualDuplex.REG0] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Driver\Common KeyValueName=ManDuplexBooklet YesValue=0100 NoValue=0000 [EnableManualDuplex.REG1] KEY=HKEY_LOCAL_MACHINE NAME=SYSTEM\CurrentControlSet\Control\Print\Printers\<FRIENDLYNAME>\PrinterDriverData KeyValueName=DuplexBooklet YesValue=0100 NoValue=0000 [Toolbox.Config] 0=EnableBidi [EnableBidi] Available=YES DISPLAYTEXT=ENABLE_BIDI_TXT DefaultValue=YesValue COUNT=1 [EnableBidi.REG0] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Toolbox\Common KeyValueName=Enable Bi-di YesValue=0100 NoValue=0000 ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; Post-Install Information ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [Post-Install] 0=Toolbox.Directory // if a program needs to be run after installation, follow the format below [Test] DIRECTORY=<WINDIR> EXEName=notepad.exe CommandLine=temp.txt WAIT=NO INFOTYPE=EXE ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; From here onwards, it will be uninstall information for all the ; components ; Only components with uninstall information will appear here ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [Uninstall.Main] DefaultRemoveAll = YES [PCL3 Driver.REGINFO0] KEY=HKEY_LOCAL_MACHINE NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Driver [PCL3 Driver.REGINFO1] KEY=HKEY_CURRENT_USER NAME=SOFTWARE\Hewlett-Packard\HP Printers\HPW8 Driver [PCL3 Driver.FILEINFO0] DIRECTORY = <WINDIR>\INF FILE0=hp1220c.inf FILE1=hp1220c.pnf [PCL3 Driver.FILEINFO1] DIRECTORY = <TARGETDIR> FILE0=readme.doc ; eg. of additional files to be deleted ;[PCL3 Driver.FILEINFO0] ;DIRECTORY = <WINDIR> <= This directory is defined in InstallShield. Please refer to _sdcomp.rul _ObtainFullDirectoryName function ;FILE0=xxx.xxx ;FILE1=yyy.yyy ////////////////////////////////////////////////////////////////////////////////////////////////////////////// ; Uninstall information for USB ////////////////////////////////////////////////////////////////////////////////////////////////////////////// [USB.Uninstall] ClassGUID = {82692260-e189-11d2-818a-080009a9c35c} DeviceID = DESKJET 1220C MODEL = 1220C SUPPORTED = YES VID = USB\VID_03F0&PID_0212 [CopyDisk_Supported_Platforms] Value=1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.