1. Rev1L.exe Driver
2. RELEASE.TXT File Contents

RELEASE.TXT Driver File Contents (Rev1L.exe)

Motorola BitSURFR Pro
Software Release Advisory Notice

New Revision Code:  1L
Replaced Revision Code: 1K
Revision Date:  08/12/97

Revision Summary
---------------
This is a release to correct conditions that existed in 1K code and to add the PPP
Passthrough Feature and support for Enhanced Caller ID (Name Delivery)


Documentation Changes
---------------------
* In the 1L code, the &F1 profile has been changed to a V.120 profile.  Also, the
  default for DTR Setting has been changed to &D2 (hangup) and the default for
  DCD Setting has been changed to &C1 (normal) for all factory profiles.

* When placing a Multi-Link PPP call where the two telephone numbers are the
  same, you should now enter the number only once.  If the two telephone numbers
  are different, you must still enter both numbers connected by an ampersand (&).

* You may now disable Call Waiting on the BitSURFR Pro's voice ports.  This can
  be done in LocalMenu, under the Voice Ports menu.  You can also disable Call
  Waiting using AT commands: the command to disable Call Waiting on Voice Port 1 
  is "AT*%A78=0", for Voice Port 2 it is "AT*2%A78=0".  To re-enable Call Waiting,
  the command is "AT*%A78=1" for Voice Port 1 and "AT*2%A78=1" for Voice Port 2.

* The number of times the BitSURFR Pro will attempt to connect the second channel
  of a Multi-link PPP call may now be set.  See PPP.txt for details.

* See PPP.txt for documentation on PPP Passthrough

Release Notes
-------------

New Features: 
* PPP Passthrough 
* Support for Enhanced Caller ID (Name delivery)
* New option to disable Call Waiting on the Voice ports


* Note: MOT1116f.inf file is required for 230.4 Kbps operation.  See Driver.txt
for instructions.


Bug Fixes:

* Corrects POTS compatibility problem with the Zoom V.34 modem
* Corrects a reset problem associated with using the AT@P2 command to 
  use 230.4 Kbps 
* Corrects a problem with CHAP challenges greater than 40 chars
* The AT&H Help screen information is reduced
* Corrected problem with 3-way calling during a Multi-link PPP call


Upgrade Requirements:
This upgrade is softload compatible.




/////////////////////////////////////////////////////////////////////////
		     !!!!!!NOTE!!!!!!
You can upgrade to Revision 1K from ANY previous version of BitSURFR Pro
software.  Follow all precautions in the included flash.txt file.

Motorola BitSURFR Pro
Software Release Advisory Notice

NOTICE:  1I release was never issued.

Board Number:  4574190                  
New Revision Code:  1K
Replaced Revision Code: 1J
Revision Date:  12/18/96  
	
Revision Summary
---------------

This is a maintenance "bug fix" release to correct problems that existed
in 1J code.

Documentation Changes
---------------------
The 1K code makes AT&F and AT&F1 the same. Using either AT command will set the
bitsurfr pro for a single channel ppp connection at 64k b-channel speed.
For V.120 connections %A2=2 will have to be added to the AT&F or AT&F1
init strings. For a 56k b-channel speed connection %A4=1 will have to be
added to AT&F or AT&f1.
Examples:
1)64K V.120- AT&F%A2=2 or AT&F1%A2=2 
2)56K V.120- AT&F%A2=2%A4=1 or AT&F1%A2=2%A4=1
3)56k PPP-   AT&F%A4=1 or AT&F1%A4=1

**NOTE:  In some areas, 64K connections are not availible due to limitations 
at the Telco, in these areas, be sure to use the 56K settings above.

Release Notes
------------- 

New Features: none

Bug Fixes:

*  Resolves an initialization condition with certain Adtran repeaters
*  Enhances MLPPP operation with Trumpet software.
*  Corrects a lockup condition caused by rapid use/disuse of Dynamic Channel
   Allocation
*  Enhances calling to a ROLM pbx.
*  Corrects a condition where a multilink call is est. across two different 
   routers, and a multilink bundle can not be established correctly.
*  Resolves a case where +++ disconnect does not work from PPP mode.
*  Enhances throughput with rev 4.6 of Ascend Software
*  Changes the default protocol for &F0 to PPP, change the default link
   speed for &F0-3 to 64K, change the default date to 01/01/80.
*  Corrects a condition where softloading can cause POTS ringer failure.

Upgrade Requirements
*This upgrade is softload compatible.


Softload file is 4190_b1k.sl
Results of ATI8 command: 

Software Revision:   1K
Freshest File Stamp: DEC 18 96  08:40


/////////////////////////////////////////////////////////////////////////

		     !!!!!!NOTE!!!!!!
You must upgrade to 1JB from ANY previous version of BitSURFR Pro
software (A,B,...F).  If G or H rev is resident, 1J may be loaded.
If you have rev G or H, please load rev 1J.  If you do not
have rev G or H, (check this using the ATi8 command) then you should download
and use the 1JB version.  Failure to do so may unnecessarily expose your
BitSURFR Pro to Boot Sector Failure.  Follow all precautions in the
included flash.txt file.

Motorola BitSURFR Pro
Software Release Advisory Notice

NOTICE:  1I release was never issued.

Board Number:  4574190                  
New Revision Code:  1J 
Replaced Revision Code: 1H
Revision Date:  09/11/96  
	
Revision Summary
---------------

This is a maintenance "bug fix" release to correct problems that existed
in 1H code and to add the CHAP support Feature.
Documentation Changes
*Included CHAP.txt file on CHAP.

Release Notes
------------- 

New Features:  CHAP support

Bug Fixes:

*  Corrected a Livingston Portmaster compatability issue
*  The help for the &V command showed extraneous PPP setting displays.  
   The only valid command is &V=M.
*  MPPP dialing of dual number from stored number location repaired.
*  The softload password was being corrupted by the >F command. 
*  CTS response in V.25 bis calls corrected.
*  Enhanced reliability of connection on AT&T switches.
*  Enhanced compatibility with the Courier I-Modem.
*  Corrected occasional AIMUX data corruption on very long distance 
   (long time delays - transcontinental) connections.
*  Corrected an infrequent lockup that occured at "ATA" induced disconnects.
*  Enhanced BONDING performance on poor quality lines.
*  Corrected an infrequent hang on AIMUX disconnects.
*  Corrected a "V.120 over audio" hang condition.
*  AT&D3 now performs properly when used on PPP connections

Upgrade Requirements
*This upgrade is softload compatible.

		    !!!!!!NOTE!!!!!!
You must upgrade to 1JB from ANY early version of BitSURFR Pro
software (A,B,...F).  Revision 1JB includes a robust Boot Sector as
released in rev G.  This file is for users of the G or H revs, incl. Hpt6.


Softload file is 4190_1J.SL
Results of ATI8 command: 

Software Revision:   1J
Freshest File Stamp: SEP 11 96  16:01


/////////////////////////////////////////////////////////////////////////

Motorola BitSURFR Pro
Software Release Advisory Notice


Board Number:  4574190                  
New Revision Code:  1H 
Replaced Revision Code: 1G
Revision Date:  07/31/96  
	
Revision Summary
---------------

This is a maintenance "bug fix" release to correct problems that existed
in 1G code.
Documentation Changes

Release Notes
------------- 

New Features:  None

Feature Modifications:  "Nailed" circuit operation is not supported

Bug Fixes:

*  Enhanced 911 operation to provide ring back indications utilizing
   the "Alerting Pattern 6" ring indication.

Upgrade Requirements
*  This upgrade is softload compatible.

		    !!!!!!NOTE!!!!!!
You must upgrade to 1HB from ANY previous version of BitSURFR Pro
software (A,B,...F).  Revision 1HB includes a robust Boot Sector as
released in rev G

Softload file is 4190_1HB.SL
Results of ATI8 command: 

Software Revision:   1H
Freshest File Stamp: JUL 30 96  15:38



/////////////////////////////////////////////////////////////////////////




Motorola BitSURFR Pro
Software Release Advisory Notice

Board Number:  4574190                  
New Revision Code:  1G   
Replaced Revision Code: 1F
Revision Date:  06/04/96  
	
Revision Summary
---------------

This is a maintenance "bug fix only" release to correct problems that existed
in 1F code.
Documentation Changes
*None.

Release Notes
------------- 

New Features:  None


Feature Modifications:

Bug Fixes:

*    Corrects a lockup condition created when placing a MLPPP call
     after placing an AIMUX call
*    Fixes a MLPPP connect problem to Cisco Routers
*    Three way call support for the Siemens switch (NIUF capability U & V)
     was enhanced to allow multiple drops and adds of the last call.
*    Various anomolies in V.120 Sync mode were corrected.
*    Echo Supressor tone operation was enhanced and A-Law operation added
*    Message waiting operation was modified to more reliably indicate 
     a pending message.
*    LLC IE added for call protocol detection support for Cisco routers
*    BONDING was enhanced for operation on the new NIUF U & V capabilities
*    PPP negotiation with Proteon PPP stack was corrected
*    A change was added to make high speed MLPPP more robust(less likely
     to drop) on certain applications.
*    A modification was added to ensure Autobaud after exiting MPMC 
     operation (phone monitor on SURFR Setup)
*    Caller ID security now allows the copying of numbers from one
     port to another cleanly.
*    Additional enhancements were added to prevent the corruption of
     flash during softload.

Upgrade Requirements
*This upgrade is softload compatible.

		!!!!!!NOTE!!!!!!
You may upgrade to 1GPT from ANY previous version of BitSURFR Pro
software.

Softload file is 4190_1G.SL
Results of ATI8 command: 

Software Revision:   1G
Freshest File Stamp: JUN 04 96  13:22


/////////////////////////////////////////////////////////////////////////



Motorola BitSURFR Pro
Software Release Advisory Notice

Board Number:  4574190                  
New Revision Code:  1F  
Replaced Revision Code: 1E
Release Date:  03/29/96 
	
Release Summary
---------------

This is a maintenance "bug fix only" release to correct FCC RFI 
interference as well as other problems that existed in 1E code.
Documentation Changes
*None.

Release Notes
------------- 

New Features:
* No new features added.

Feature Modifications:
* No modifications added.

Bug Fixes:
*Change to use software echo to support hardware change.
*Restored @M2=n command support.
*Update LocalMenu copyright to 1996.

Upgrade Requirements
*This upgrade is softload compatible.

		!!!!!!NOTE!!!!!!
**** REVD MUST BE LOADED PRIOR TO UPGRADING TO REV E or F ****
If you already have REV D or E (from factory), or if you upgraded
to REV D previously, you may load REV F.

Softload file is 4190_1F.SL
Results of ATI8 command: 
Software Revision:   1F
Freshest File Stamp: MAR 29 96  13:59


/////////////////////////////////////////////////////////////////////////


Motorola BitSURFR Pro
Software Release Advisory Notice

Board Number: 4574190
New Revision Code: 1E
Replaced Revision Code: 1D
Release Date: 02/08/96


Release Summary
---------------
This is a maintenance release to correct problem with ATmel EEPROMs as well   
as other problems found in 1D code.


Release Notes
-------------

New Features:
* No new features added.

Feature Modifications:
* No modifications added.

Bug Fixes:
* Added code to disable EEPROM write-protect since Atmel EEPROMs have been 
  found to be write-protected.  This is a manufacturing issue only.
* Corrected a Multi-Link PPP problem with negotiation of Protocol Field 
  Compression and/or Address Control Field Compression.  This was made due to
  an incompatibility between Shiva PPP dialer software and Ascend routers.
* Corrected a problem with AT command parsing of the softload password.
* Corrected Date/Time midnight rollover reset problem.


Upgrade Requirements
--------------------
This upgrade is softload compatible.
**** REVD MUST BE LOADED PRIOR TO UPGRADING TO REV E ****
Softload file is 4190_1E.SL
Results of ATI8 command: 
  Software Revision: 1E
  Freshest Date Stamp: FEB 08 96   10:08

/////////////////////////////////////////////////////////////////////////


Motorola BitSURFR Pro
Software Release Advisory Notice

Board Number: 4574190
New Revision Code: 1D
Replaced Revision Code: 1C
Release Date: 12/06/95


Release Summary
---------------
This is a maintenance release to correct Multi-Link PPP and Softload problems 
found in Revision 1C. 


Release Notes
-------------

New Features:
* No new features added.

Modifications:
* Modified DTE LED operation to indicate when only one B channel was 
  connected for call attempts using a two-channel protocol, i.e. Multi-Link
  PPP, AIMux, and BONDING. 
  The DTE LED status indications are now as follows:
  
  Slow Wink: 
  Indicates that the terminal adapter has placed or is receiving a data call 
  to/from another ISDN compatable device.  There is no change in this state
  from previous versions of software.

  Fast Wink: 
  Indicates that one B channel is connected when the terminal adapter is set
  for a protocol which uses two B channels.  Applicable protocols are
  Multi-Link PPP, AIMux, and BONDING.  Note that both B channels can 
  sometimes connect quickly enough to bypass this state.

  Steady On: 
  Indicates that a data call is established with the proper number of B
  channels for the selected protocol, i.e. one B channel for Clear, V.120,
  and PPP, two B channels for MLPPP, AIMux, and BONDING.


Bug Fixes:
* Corrected a Boot Sector problem which prevented recovery from a softload
  failure.
* Corrected a Multi-Link PPP problem which corrupted data frames of a 
  particular length on the network-to-DTE path.
* Corrected a Multi-Link PPP problem where calls were not disconnected 
  properly 100% of the time.

Upgrade Requirements
--------------------
This upgrade is softload compatible.
Softload file is 4190_1D.SL
Results of ATI8 command: 
  Software Revision: 1D
  Freshest Date Stamp: DEC 06 95   06:57


//////////////////////////////////////////////////////////////////////////


Motorola BitSURFR Pro
Software Release Advisory Notice

Board Number: 4574190
New Revision Code: 1C
Replaced Revision Code: 1B
Release Date: 10/31/95


Release Summary
---------------
This is a maintenance release to correct LAPD and Multi-Link PPP problems 
found in Revision 1B. 

CAUTION!  Closely follow the included procedures.  Failing to 
properly download this file can render your Bitsurfr Pro disabled.  
Only upgrade with Hyperaccess Lite or Microphone PRO and utilize 
hardware (RTS/CTS) flow control.
     
If your Bitsurfr fails to upload or you are unsure about the procedure 
contact Motorola at 1-800-221-4380 for assistance.

Release Notes
-------------

New Features:
* No new features added.

Modifications:
* Modified to allow less than seven digits for the DN when configured for NI1.
* Changed factory default for V.120 max receive frame size from 256 to 260 
  bytes.  

Bug Fixes:
* Corrected LAPD problem resulting in the loss of a call when a Northern 
  Telecom switch changed D-channel handlers(SWTCH) during a call.
* Corrected a multi-link PPP problem in which a PAP request was transmitted 
  too soon after the previous PAP request.  Problem resulted in the second B 
  channel being disconnected.


Upgrade Requirements
--------------------
This upgrade is softload compatible.
Softload file is 4190_1C.SL
Results of ATI8 command: 
  Software Revision: 1C
  Freshest Date Stamp: OCT 31 95   09:15
Motorola BitSURFR Pro
Software Release Advisory Notice


///////////////////////////////////////////////////////////////////////////



Board Number: 4574190
New Revision Code: 1B
Replaced Revision Code: 1A
Release Date: 10/6/95


Release Summary
---------------
This is a maintenance release to correct problems found in Revision 1A. 


Release Notes
-------------

New Features:
* No new features added.

Modifications:
* Modified *I command to add additional parameters required by MediaCom
  software(Ameritech).
* Changed default ISDN line speed from 64K to 56K.  
* Changed ATT Custom switch settings to allow 20 digit SPID numbers.

Bug Fixes:
* Corrected auto answer problem with Win95.
* Corrected multi-link PPP interoperability problems.
* Corrected problems associated with T-WAIT timer.  Unit will loose network 
  sync when analog handset is taken offhook(Ameritech).
* Corrected problems with Caller Services.
* Corrected problems with text messages associated with Siemens and ATT 
  switches.
* Corrected problem with Caller ID string being truncated.
* Corrected problem with "loud click" when incoming call is not answered and 
  user is engaged in an active call.
* Corrected problem with invalid numbers in the Calling Party Number and 
  Called Party Number IE fields.
* Corrected problem with caller ID tone being generated when analog handset 
  is offhook.
* Corrected problem where calls were not bridged on Siemens switches.
* Corrected problem with receiving data calls while active on voice calls.
* Corrected problem with not being able to drop the last party on a 3-way
  conference.


Upgrade Requirements
--------------------
This upgrade is softload compatible.
Softload file is 1B.SL
Results of ATI8 command: 
  Software Revision: 1B
  Freshest Date Stamp: OCT 06 95   08:13