1. aln101.zip Driver
2. MSWIN95.TXT File Contents

MSWIN95.TXT Driver File Contents (aln101.zip)

   Windows 95

   Introduction:
   -------------
   This document describes the procedure to install  Windows 95
   driver for AcerLAN ALN-101 PnP Ethernet adapter.

   Location of Driver:     \WIN95\ALN101.SYS   NDIS 3 Mini-Port DRIVER
                           \WIN95\ALN101.DOS   NDIS 2 DRIVER
                           \WIN95\ALN101.COM   ODI DRIVER

   Installing driver procedure on Microsoft Windows 95 :
   -----------------------------------------------------
      Windows 95 is the operation system with PnP feature. If you set
      the  adapter in  PnP mode,  Windows 95  will  auto-detect your
      adapter configuration and set it.  The user don't need to do anything
      for the adapter configuration.

      Executing Windows 95, it will auto-detect your system configuration
      then find the adapter hardware.

      1. There will show a "New Hardware Found" dialog box and ask you to
         select which driver you want to install, select "Driver from disk
         provided by hardware manufacturer".

      2. Insert the AcerLAN ALN-101 driver disk into drive A and specify
         the driver pathname A:\WIN95 .

      3. Windows 95 will appear some messages to insert Windows 95 system
         disk to complete setup steps.

      4. Windows 95 will finish the other installation procedure
         automatically, then you restart the system.

      If the version of your Win95 is OSR2(OEM Service Release 2),the
      procedure of driver's installation should be:

      1. When Win95 finds the ALN-101 adapter,it will show a dialog box of
         "Update Device Driver Wizard".The message of "The wizard will
         complete the installation: NE2000 Compatible" will be shown,then
         select "Next".

      2. There will show a message of "Windows found the following updated
         driver for this device:  NE2000 Compatible ..." and "Location of
         Driver : Inf".Insert the AcerLAN ALN-101 driver disk into
         drive A and select "Other Locations".

      3. Specify the driver pathname "A:\WIN95" in the dialog box of
         "Select Other Location".

      4. There will show a message of "Windows found the following updated
         driver for this device:  AcerLAN ALN-101 PnP Ethernet Adapter." and
         "Location of Driver : Win95" in the dialog box of "Update Device
         Driver Wizard".Select "Finish".

      5. Windows 95 will appear a message for you to specify the path of
         the source drivers and insert Windows 95 system disk to complete
         setup steps.

      6. Windows 95 will finish the other installation procedure
         automatically, then you restart the system.

      Remember to restart Windows 95 after you have installed the driver.

  Note:
      If you want the Windows 95 to detect and show the message for ALN-101
      PnP Ethernet adapter card again, you can double-click Control icon,
      select the system icon to run, and select the Device Manager tag.
      Remove the 'AcerLAN ALN-101 PnP Ethernet Adapter' item in the
      Network Adapter tree leaf.

      If you set the network card in jumpless mode, you must setup your
      driver as following procedure by manual.

      1. When log into Windows 95, click on the "Start" icon ,then move the
         mouse to "Settings" icon and click on the "Control Panel".

      2. In the Control Panel window, click on the "Network" icon.

      3. In the Network Configuration dialog box, choose the "Add.." button.
         "Select Network Component Type" dialog box appears, and
         select "Adapter" icon.

      4. In the "Select Network adapters" dialog box, choose the
         "Have Disk" button.

      5. In the "Install From Disk" dialog box, input or Browse to the
         path "A:\WIN95" in the "Copy manufacturer's files from:".

      6. You will see "AcerLAN ALN-101 PnP Ethernet Adapter" appers in the
         "Models" field of "Select Network adapters", then click "OK".

      7. Then, you will see "AcerLAN ALN-101 PnP Ethernet Adapter"
         in the Network Configuration dialog box, select it and then
         click on the "Properties" button.

      8. In this dialog box, select "Resources ", the screen will come up
         with settings: IRQ and I/O address. Make sure the values
         that come up match the actual board settings.

      9. Restarting your system you will acquire network service.