Workstation for Novell DOS/MS Windows Client Introduction: ------------- This document describes the procedure to setup the NetWare DOS ODI driver for AcerLAN ALN-201 PCI Ethernet adapter. Location of Driver: \DOS\ALN201.COM Sample Configuration Files: --------------------------- STARTNET.BAT: LSL ALN201 IPXODI NETX or VLM NET.CFG LINK DRIVER ALN201 FRAME ETHERNET_802.3 EtherID = 006067000001 ----> This keyword is Ethernet address of a adapter, and only required when more than one ALN-201 adapters exist on one system NOTE: a. The files LSL.COM, IPXODI.COM, NETX.*, VLM.EXE, *.VLM are provided by Novell. b. If more than one card is inserted on your system, the driver would prompt a screen for you to choice a LAN card. Simple setup Procedures for NetWare Client : ----------------------------------------------- Before you start with the installation process, make sure that the adapter is properly installed. Make sure that your NetWare Client operating system is properly installed. 1. Copy ALN201.COM from the AcerLAN Driver Diskette subdirectory A:\DOS to your harddisk. 2. Create a batch file the commands listed above under STARTNET.BAT 3. Run the batch file. Setup Procedures for NetWare Client with VLM: -------------------------------------------------------- The installation utility INSTALL.EXE is located on Novell's "Netware Client for DOS and MS Windows" disk 1. Run INSTALL from the DOS prompt. The NetWare Client Install program screen will appear. You must complete each of the questions. These options are specific to your needs. 1. Enter the destination directory for the NetWare Client. (The default directory is C:\NWCLIENT.) 2. Gives you the option to automatically update the CONFIG.SYS and the AUTOEXEC.BAT files or modify them at a later time manually. 3. Do you wish to install support for MS Windows ? (Y/N) (MS Windows Subdirectory: default C:\WINDOWS) 4. Asks you to select a network driver and provide configuration options. It uses the specifications you select to create the file NET.CFG. Insert the AcerLAN drivers disk when prompted for the driver disk and specify the driver path A:\ 5. Press <Enter> to install NOTE: ----- 1. Be sure to add LASTDRIVE=Z to your CONFIG.SYS file for the network mappings to work properly. 2. Installing Multiple LAN Adapters: The keyword, EtherID, is provided for multiple LAN adapters in a single system by ALN201.COM. If EtherID unknown, you can ignore it in the NET.CFG file and directly run ALN201 under the DOS prompt, then your screen will display every adapter EtherID and select which one you need. 3. The "Netware Client for DOS and MS Windows" diskettes, may be generated from Netware server 4.1 as followings: a. At the NetWare prompt (indicated by the Server name), run the INSTALL.NLM program by typing: server name: LOAD INSTALL <Enter> b. Select "Product Options" and press <Enter>. c. Select "Choose an item or product list above" and press <Enter>. d. Select "Create DOS/MS Windows/OS2 Client Install Diskette" and press <Enter>. e. Specify Network files directory or only press <Enter>. If your server is installed from CD-ROM, make sure the CD is on the CD-ROM. f. Mark the "DOS/MS Windows Client Install", and press <F10>.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.