BOOTROM.TXT Driver File Contents (aln201.zip)

----------------   The AcerLAN ALN-201 PCI RPL Boot ROM  ----------------------

 How to install the Novell RPL server

  1. You must create a boot diskette. The files on this boot diskette,
     for example, are the following:

        COMMAND  COM
        LSL      COM
        ALN201   COM
        IPXODI   COM
        NETX     EXE
        AUTOEXEC BAT


     The AUTOEXEC.BAT file must contain these lines :

           SET COMSPEC=F:\LOGIN\COMMAND.COM
           LSL
           ALN201
           IPXODI
           NETX

     NOTE: The contents of the diskette and AUTOEXEC.BAT file are depended on
           your needs. The above is only an example.

  2. Boot a workstation with at least one floppy disk drive, and log in to
     the server as SUPERVISOR.(or ADMIN)

  3. Change directory to SYS:SYSTEM

  4. With the DOS boot diskette in driver A: execute the DOSGEN utility. This
     creates a DOS boot image file named NET$DOS.SYS.

     NOTE: Make sure the image file is created ok. Some floppy diskette is
           fail to generate the NET$DOS.SYS, please change the diskette and
           try again.

  5. Copy NET$DOS.SYS to the SYS:LOGIN directory.

  6. Copy RBOOT.RPL to the SYS:LOGIN directory. (only for Netware 3.11)

  7. Copy RPL.NLM to the SYS:SYSTEM directory.  (only for Netware 3.11)

     NOTE: a. The RBOOT.RPL & RPL.NLM can be founded in the subdirectory RPL
              of the AcerLAN driver diskette.
           b. The Netware 3.12, 4.0x, 4.10 have bundled the above two files.

  8. Copy COMMAND.COM to the SYS:LOGIN directory.

  9. Add the RPL function for Netware Server

     :load rpl
     :bind rpl to ALN201

     NOTE: a. If you use another LAN card to create the Netware server,
              change the name ALN201 to the specified name.
           b. The frame type have to be binded to Ethernet_802.2

 10. Configure the AcerLAN ALN-201 card to "Boot ROM Enable".

 11. Reboot the workstation, remember to run CMOS setup. Let any drive (C or D,
     A, B) setting to be "Not installed".

 12. Now, when the file server is running, the workstation equipped with Boot
     ROM on the ALN-201 card will be attached to the file server without any
     hard disk or floppy.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.85