LANRQTR.TXT Driver File Contents (aln201.zip)

   OS/2 LAN Requester

   Introduction:
   -------------
   This document describes the procedure to install NDIS driver on
   OS/2 LAN Requester for AcerLAN ALN-201 PCI Ethernet adapter.

   Location of Driver: \OS2NDIS\ALN201.OS2

   Installing driver procedure on OS/2 LAN Requester:
   ---------------------------------------------------
      Before you start with the installation  process,  make sure that
      OS/2 LAN Requester  is properly installed.  Similarly, your adapter
      should also be properly installed in your PC.

      1. In OS/2 window, Click the "MPTS" icon.

      2. The screen will display the IBM Log, press "OK".

      3. Select "Install" button.

      4. Insert the AcerLAN ALN-201 driver diskette, specify the driver
         path A:\OS2NDIS and press <Enter>.

      5. When complete above step to load  ALN201.OS2  into OS/2 system,
         then configure your system.

      6. The same step as step 3, select "Configure" button.

      7. The screen will display "Configure" dialog box and select "LAN
         adapters and protocols" then press "configure" button.

      8. The screen will display "LAPS Configuration" dialog box, move
         highlight to "AcerLAN ALN-201 PCI Ethernet Adapter" item in
         "Network Adapter" window, and select "NetBios" protocol.
         Press "OK".

      9. Installation is complete now. Reset your PC by turning it off
          and on.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.05