README.TXT Driver File Contents (z18850en.exe)

README file for:

Mobile PS
for Windows(R) 2000/XP and Windows Server(R) 2003


Last Modified: 2007/02/21




------------------------------------------------------------------------
Specifications
------------------------------------------------------------------------
1. This "Mobile PS" works on Windows 2000/XP and Windows Server 2003.
2. The following environments are not supported.
- Point & Print
- Remote Desktop
- MetaFrame


------------------------------------------------------------------------
How to Install
------------------------------------------------------------------------
1. Unzip the installation files.
2. Open the created folder.  Double click the "INSTALL.vbs" file.
3. The "Mobile PS" dialogue comes up.  Click "Yes" to install.
4. This printer driver does not have a digital signature. Therefore a warning might be displayed.
5. Use the next dialogue to select whether to install the new driver as the default printer.
6. After installation, please confirm that "Mobile PS" was created in the "Printers" folder.
[Note]
The installation of a Mobile PS on a Windows computer results in the creation of a file called RMBPMW__.dll.
If a version of RMBPMW__.dll that is older than the one being installed with the Mobile PS, 
already exists on the system, the user will be warned to uninstall the older driver.
To fully uninstall the older Mobile PS, please refer "How to Uninstall". 

------------------------------------------------------------------------
How to Uninstall
------------------------------------------------------------------------
1. Close all applications.
2. Open "Control Panel" and select "Add or Remove Programs".
3. Select "Mobile PS".
4. When the confirmation dialogue is shown, click "Yes" to uninstall.
5. When prompted, select whether to remove the list of printers from the system.
6. Restart the PC to complete the uninstallation.


------------------------------------------------------------------------
How to Print
------------------------------------------------------------------------
Specifying the destination by IP address:
1. Select "Print" from an application.
2. The "Print Destination" dialogue comes up.
3. Input the printer's IP address, and click "OK" to print.

Specifying the destination by host name:
1. Select "Print" from an application.
2. The "Print Destination" dialogue comes up.
3. Click the "Advanced..." button to go to the "Advanced Setting" dialogue.
4. Select "Host Name" as the "Input Type".
5. Click "OK" to go back to the "Print Destination" dialogue.
6. Enter the printer's host name in the "Print Destination" dialogue, and click "OK" to start printing.

Searching for the destination:
1. Select "Print" from an application.
2. The "Print Destination" dialogue comes up.
3. Click "Search" to find  printers on the TCP/IP network. The result will be displayed in the "Select Printer" dialogue.
4. Select a printer from the list, and click "OK" to go back to the "Print Destination" dialogue.
5. Click "OK" to print.
[Note]
All the PostScript printers on the TCP/IP network will be shown in the "Select Printer" dialogue,
but some functions might not be available depending on the selected printer.

Advanced Search Options:
Search by "Community Name" (SNMP).
Search by IP address range.
"Auto(default)" will search only for printers within the subnet (Broadcast).
"Custom" will search only for printers within a specified range (Ping Sweep).
[Note]
Firewalls and virus software may cause problems for searching with the "Auto" setting.
If this happens, please use the "Custom" setting.

Favorite Destination:
1. For easy access, a destination can be saved in the "Favorite Destination" list in the "Print Destination" dialogue.
2. To save a destination, type the printer's IP address, Host Name and Nickname, and click "Save".
3. Saved destinations can be removed from the list using the "Delete" button.

------------------------------------------------------------------------
Additional information
------------------------------------------------------------------------
1. Collate
- To print multiple collated copies, turn application collation off using the application print dialogue.
Enable driver collate in the "Device Option" tab.
We do not recommend the use of application collate functions as they tend to produce unpredictable results.

- After selecting multiple copies using "Copy Count:" in "Advanced Options", be sure to set the "Collated" checkbox to OFF.
Instead, please use the "Collate" setting in "Printer Features".

2. Additional Page Count in Duplex Printing
An extra page is added to the end of odd-paged duplex jobs.
If the printer does not support duplex printing, the job will be printed in simplex with an extra page at the end.
Whether the printer supports duplex or not, the added page might be incremented in the printer's counter.
 
3. Color Mode
Depending on the application, the "Color" setting in the "Paper/Quality" tab might not work.
In this case, please click the "Advanced" button and use the color mode setting instead.

4. Virus Scanners
Some virus scanners may display a warning during installation.

5. Delay in dsiplaying "Print Destination"dialogue
If a job is submitted while there is already a job waiting in the print queue,
the "Print Destination" dialogue is not displayed untill after the waiting job is complete.


[End of Document]
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.69