;; VideoCAMsc.inf - INF file for Still Image interface of VideoCAM Series Camera ;; ;; Copyright (c) 2002, Endpoints Incorporated ; ; IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT IMPORTANT ; 1. See 'AVI_NOTE' regarding RAW AVI creation (vs RGB AVI creation) [Version] Signature = "$CHICAGO$" Class = Image ClassGUID = {6bdd1fc6-810f-11d0-bec7-08002be2092f} Provider = %Provider% CatalogFile = ep402ref.cat DriverVer = %DriverVer% [DefaultInstall] CopyFiles=SE402SC.Files,SE402SC.STIFiles,SE402SC.TwainFiles,SE402SC.IPLFiles [DestinationDirs] DefaultDestDir=10,system SE402SC.Files=10,system32\drivers SE402SC.TwainFiles=10,twain_32\KYE\VideoCAM SE402SC.IPLFiles=11 SE402SC.STIFiles=11 [SourceDisksNames] 1=%DiskDescription%,VideoCAMsc.inf,,%DriverSourceDir% [SourceDisksNames.x86] 1=%DiskDescription%,VideoCAMsc.inf,, [SourceDisksFiles] se402sc.sys=1 aoxusd.dll=1 epwiamd.dll=1 epwiaui.dll=1 epavisrc.ax=1 epwavdst.ax=1 AoxSTIAp.exe=1 AoxAMCap.exe=1 eptwainu.ds=1 eptwainu.ini=1 unicows.dll=1 ept_engl.dll=1 ept_fren.dll=1 ept_germ.dll=1 ept_ital.dll=1 ept_japa.dll=1 ept_span.dll=1 epdxipl.ax=1 [ControlFlags] ExcludeFromSelect=* [Manufacturer] %Manufacturer%=EPModels [EPModels] %szDeviceDesc%=SE402RefCameraStill, USB\VID_0458&PID_7001&MI_01 %szProductDeviceDesc%=ProductSE402SC, USB\VID_0458&PID_7002&MI_01 [PreCopySection] HKR,,NoSetupUI,,1 ;-------------------------------------------------------------------- ; SE402 Reference Camera ;-------------------------------------------------------------------- [SE402RefCameraStill] DriverVer = %DriverVer% AddReg = SE402SC.AddReg, SE402SC.AddReg.Basic, SE402SC.AddReg.Register DelFiles = SE402SC.DelDrivers CopyFiles = SE402SC.Files,SE402SC.STIFiles,SE402SC.TwainFiles,SE402SC.IPLFiles SubClass = StillImage ; DeviceType should be set to 1 = scanner or 2 = camera. DeviceType = 2 ; Device SubType is Vendor-unique DeviceSubType = 0x1 ; Capabilities is a mask: ; 0x01 = Device generates events ; 0x02 = Polling needed ; 0x04 = Generate event when device installed ; 0x08 = Enable the "auto" port option ; 0x10 = WIA capable driver ; 0x20 = Driver has reduced functionality Capabilities = 0x00000003 ; To Enable additional property pages for this device in the CPL, add this ; PropertyPages = "se402sc.cpl ,EnumStiPropPages" Events = SE402SC.Events DeviceData = SE402SC.DeviceData ICMProfiles = "sRGB Color Space Profile.icm" [SE402RefCameraStill.NT] AddReg = SE402SC.AddReg, SE402SC.AddReg.Basic, SE402SC.AddReg.Register.NT DelFiles = SE402SC.DelDrivers CopyFiles = SE402SC.Files,SE402SC.STIFiles,SE402SC.TwainFiles,SE402SC.IPLFiles SubClass = StillImage ; DeviceType should be set to 1 = scanner or 2 = camera. DeviceType = 2 ; Device SubType is Vendor-unique DeviceSubType = 0x1 ; Capabilities is a mask: ; 0x01 = Device generates events ; 0x02 = Polling needed ; 0x04 = Generate event when device installed ; 0x08 = Enable the "auto" port option ; 0x10 = WIA capable driver ; 0x20 = Driver has reduced functionality Capabilities = 0x00000013 ; To Enable additional property pages for this device in the CPL, add this ; PropertyPages = "se402sc.cpl ,EnumStiPropPages" Events = SE402SC.Events DeviceData = SE402SC.DeviceData ICMProfiles = "sRGB Color Space Profile.icm" ;-------------------------------------------------------------------- ;-------------------------------------------------------------------- ; Productized 402 Camera ;-------------------------------------------------------------------- [ProductSE402SC] DriverVer = %DriverVer% AddReg = ProductSE402SC.AddReg, SE402SC.AddReg.Basic, SE402SC.AddReg.Register DelFiles = SE402SC.DelDrivers CopyFiles = SE402SC.Files,SE402SC.STIFiles,SE402SC.TwainFiles,SE402SC.IPLFiles SubClass = StillImage ; DeviceType should be set to 1 = scanner or 2 = camera. DeviceType = 2 ; Device SubType is Vendor-unique DeviceSubType = 0x1 ; Capabilities is a mask: ; 0x01 = Device generates events ; 0x02 = Polling needed ; 0x04 = Generate event when device installed ; 0x08 = Enable the "auto" port option ; 0x10 = WIA capable driver ; 0x20 = Driver has reduced functionality Capabilities = 0x00000003 ; To Enable additional property pages for this device in the CPL, add this ; PropertyPages = "se402sc.cpl ,EnumStiPropPages" Events = SE402SC.Events DeviceData = ProductSE402SC.DeviceData ICMProfiles = "sRGB Color Space Profile.icm" [ProductSE402SC.NT] AddReg = ProductSE402SC.AddReg, SE402SC.AddReg.Basic, SE402SC.AddReg.Register.NT DelFiles = SE402SC.DelDrivers CopyFiles = SE402SC.Files,SE402SC.STIFiles,SE402SC.TwainFiles,SE402SC.IPLFiles SubClass = StillImage ; DeviceType should be set to 1 = scanner or 2 = camera. DeviceType = 2 ; Device SubType is Vendor-unique DeviceSubType = 0x1 ; Capabilities is a mask: ; 0x01 = Device generates events ; 0x02 = Polling needed ; 0x04 = Generate event when device installed ; 0x08 = Enable the "auto" port option ; 0x10 = WIA capable driver ; 0x20 = Driver has reduced functionality Capabilities = 0x00000013 ; To Enable additional property pages for this device in the CPL, add this ; PropertyPages = "se402sc.cpl ,EnumStiPropPages" Events = SE402SC.Events DeviceData = ProductSE402SC.DeviceData ICMProfiles = "sRGB Color Space Profile.icm" ;-------------------------------------------------------------------- ;-------------------------------------------------------------------- ; SE402 Reference Camera ;-------------------------------------------------------------------- [SE402RefCameraStill.NT.Services] AddService=SE402RefCameraStill, 0x00000002, SE402RefCameraStill.AddService [SE402SC.DeviceData] Server=local STIHardwareID=%STIHardwareID% TwainDS=%TWAINDSID% ;LEAVE THIS OUT FOR NOW. UI Class ID={DF339FEC-10E0-4e35-B66F-65A9907FE570} CameraIndexFilename=%CameraIndexFilename% ;for internal debugging use only IgnoreImageDecodeErrors=0 ;if 1, this informs StillImage Monitor app to create index file from camera memory CreateIndexFile=0 ;if TRUE, prevents the still image app from issuing the StartAVICreator event SkipStartAVICreator=True ;if TRUE, prevents the still image app from issuing the StartImageEditor event SkipStartImageEditor=True ;if 1, this informs A/V creation process to read data from index file (instead of camera) ;UseIndexFileForAVImages=1 ;if 1, this informs TWAIN Data Source to read data from index file (instead of camera) ;UseIndexFileForImages=1 ;AVI_NOTE - if 1, this informs TWAIN Data Source to create RAW AVIs (instead of compressed RGB) ;CreateRAWAVIs=1 ;-------------------------------------------------------------------- ;-------------------------------------------------------------------- ; Productized 402 Camera ;-------------------------------------------------------------------- [ProductSE402SC.NT.Services] AddService=SE402RefCameraStill, 0x00000002, ProductSE402SC.AddService [ProductSE402SC.DeviceData] Server=local STIHardwareID=%STIHardwareID% TwainDS=%TWAINDSID% ;LEAVE THIS OUT FOR NOW. UI Class ID={DF339FEC-10E0-4e35-B66F-65A9907FE570} CameraIndexFilename=%CameraIndexFilename% ;for internal debugging use only IgnoreImageDecodeErrors=0 ;if 1, this informs StillImage Monitor app to create index file from camera memory CreateIndexFile=0 ;if TRUE, prevents the still image app from issuing the StartAVICreator event SkipStartAVICreator=True ;if TRUE, prevents the still image app from issuing the StartImageEditor event SkipStartImageEditor=True ;if 1, this informs A/V creation process to read data from index file (instead of camera) ;UseIndexFileForAVImages=1 ;if 1, this informs TWAIN Data Source to read data from index file (instead of camera) ;UseIndexFileForImages=1 ;AVI_NOTE - if 1, this informs TWAIN Data Source to create RAW AVIs (instead of compressed RGB) ;CreateRAWAVIs=1 ;-------------------------------------------------------------------- [SE402SC.Events] ; These are events that the device issues to trigger application launching AutoDownloadMemory=%AutoDownloadMemory%,{F9926C80-20D6-11D4-83B4-00104B6DC9C2},StillCam STI App StartImageEditor=%StartImageEditor%,{030C5406-2958-4d96-995E-0C4A26BEFB46},Imaging StartAVICreator=%StartAVICreator%,{3BDF75DB-20D1-41c0-8E47-546A20D3BDD3},StillCam AVI Creation Utility [SE402SC.AddReg] HKR,,WdmDeviceDesc,,%szDeviceDesc% ; this allows TWAIN Driver to support this device ; this USB ID should also appear in the TWAIN INI file under '[TWAIN Supported Devices]' HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x04587001" [ProductSE402SC.AddReg] HKR,,WdmDeviceDesc,,%szProductDeviceDesc% ; this allows TWAIN Driver to support this device ; this USB ID should also appear in the TWAIN INI file under '[TWAIN Supported Devices]' HKLM,"Software\Endpoints\TWAIN Data Source\1.0\Cameras\0x04587002" [SE402SC.AddReg.Basic] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,se402sc.sys ; these register our STI USD HKR,,USDClass,,"{06381870-F963-4bd0-AB51-1BED9FA3055D}" HKR,,CLSID,,"{06381870-F963-4bd0-AB51-1BED9FA3055D}" HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D} ,,,"Endpoints Camera Still Image USD" HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D}\InProcServer32,,,%11%\aoxusd.dll HKCR,CLSID\{06381870-F963-4bd0-AB51-1BED9FA3055D}\InProcServer32,ThreadingModel,,"Both" ; these register our WIA MiniDriver HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F} ,,,"Endpoints Camera WIA MiniDriver" HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F}\InProcServer32,,,%11%\epwiamd.dll HKCR,CLSID\{3FE1CB1C-C8FE-49e7-A266-CC077F9E9E1F}\InProcServer32,ThreadingModel,,"Both" ; these register our WIA Extension DLL HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570} ,,,"Endpoints Camera WIA UI Extensions" HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\InProcServer32,,,%11%\epwiaui.dll HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\InProcServer32,ThreadingModel,,"Apartment" HKCR,CLSID\{DF339FEC-10E0-4e35-B66F-65A9907FE570}\shellex\ContextMenuHandlers\{DF339FEC-10E0-4e35-B66F-65A9907FE570} ; this allows the device to be found by the STI Control Panel HKR,,CreateFileName,,%StiUSDDeviceName% ; Register our app as a push model aware application for use with the Still Image Push Button Monitor HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\StillImage\Registered Applications","StillCam STI App",,"%11%\AoxSTIAp.Exe /StiDevice:%%1 /StiEvent:%%2" ; Register our AVI creation app as a push model aware application for use with the Still Image Push Button Monitor ; AVI_NOTE - this creates (compressed) RGB AVIs HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\StillImage\Registered Applications","StillCam AVI Creation Utility",,"%11%\AoxAMCap.Exe /StiDevice:%%1 /StiEvent:%%2 /AOXSASMODE" ; AVI_NOTE - this creates RAW AVIs ;HKLM,"SOFTWARE\Microsoft\Windows\CurrentVersion\StillImage\Registered Applications","StillCam AVI Creation Utility",,"%11%\AoxAMCap.Exe /StiDevice:%%1 /StiEvent:%%2 /AOXSASMODE /CREATERAWAVIS" ; these are for trace messages HKR,Parameters,TraceDevice,65537,3,0,0,0 HKR,Parameters,TraceOutputLevel,65537,5,0,0,0 HKR,Parameters,TraceBreakLevel,65537,4,0,0,0 HKR,Parameters,BreakOnEntry,65537,0,0,0,0 [SE402SC.AddReg.Register] HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_AVI_Source",,"regsvr32.exe /s %11%\epavisrc.ax" HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_WAV_Filter",,"regsvr32.exe /s %11%\epwavdst.ax" HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_Codec",,"regsvr32.exe /s %11%\epdxipl.ax" [SE402SC.AddReg.Register.NT] HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_AVI_Source",,"rundll32.exe %11%\epavisrc.ax,DllRegisterServer" HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_WAV_Filter",,"rundll32.exe %11%\epwavdst.ax,DllRegisterServer" HKLM,Software\Microsoft\Windows\CurrentVersion\RunOnce,"Register_Endpoints_StillCam_Codec",,"rundll32.exe %11%\epdxipl.ax,DllRegisterServer" [SE402RefCameraStill.AddService] DisplayName = %szDeviceDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\se402sc.sys LoadOrderGroup = Base [ProductSE402SC.AddService] DisplayName = %szProductDeviceDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\se402sc.sys LoadOrderGroup = Base [SE402SC.DelDrivers] se402sc.sys,,,1 aoxusd.dll epwiamd.dll epwiaui.dll epavisrc.ax epwavdst.ax AoxSTIAp.exe AoxAMCap.exe [SE402SC.Files] se402sc.sys [SE402SC.STIFiles] aoxusd.dll epwiamd.dll epwiaui.dll epavisrc.ax epwavdst.ax AoxSTIAp.exe AoxAMCap.exe [SE402SC.TwainFiles] eptwainu.ds eptwainu.ini unicows.dll ept_engl.dll ept_fren.dll ept_germ.dll ept_ital.dll ept_japa.dll ept_span.dll [SE402SC.IPLFiles] epdxipl.ax [Strings] Provider = "Genius" Manufacturer = "KYE System Corp." ; This description should be less than 32 chars (for TWAIN driver) szDeviceDesc = "Genius VideoCAM Live SC" szProductDeviceDesc = "Genius VideoCAM Smart300 SC" AutoDownloadMemory="Auto Download of Memory" StartImageEditor="Process Camera Contents" StartAVICreator="Create Camera AVI Movies" StiUSDDeviceName="\\.\EPSE402SC" ; if multiple values are required, separate them with spaces STIHardwareID="0x4587001 0x4587002" ; this specifies the filename used to store the camera memory CameraIndexFilename="se402sc.idx" ; This must match the name embedded in the Endpoints TWAIN DS (or INI file) TWAINDSID="Genius VideoCAM Series" szConfigRegistry="Software\Endpoints\Video IPL\1.0\Cameras\0x04587001" DiskDescription="VideoCAM Series Drivers Disk" DriverSourceDir="c:\KYE\VideoCAM" DriverVer=07/19/2002,1Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.