[version] signature="$CHICAGO$" [DefaultInstall] CopyFiles=Product.copy.files, Setup.copy.files AddReg=Product.Add.Reg [ProductInstall] CopyFiles=Product.copy.files, Setup.copy.files AddReg=Product.Add.Reg [DefaultUninstall] DelFiles=Product.del.files, Setup.del.files, Twain.del.files DelReg=Product.Del.Reg [MyProgramUninstall] DelFiles=Product.del.files, Setup.del.files, Twain.del.files DelReg=Product.Del.Reg [Product.Add.Reg] HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ManufacturerName%,"DisplayName",0,"%ProductName% Driver" HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ManufacturerName%,"UninstallString",0,""%10%"\DriverSetup.exe "%30%"\%InstallDir%\" ;------------------------------------------------------------------------------- ; | ; Select your products specific ISP Parameters below | ; Note: Activate the parameter by removing the ";" from each line changed | ;------------------------------------------------------------------------------- ;--------------------------FIRST PRODUCT------------------------------------------------------------- HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Brightness Default",0,"6" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Contrast Default",0,"245" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Saturation Default",0,"480" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Sharpness Default",0,"40" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Sharpness Enable",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Prefilter",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Prefilter Compressed",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still Scale UV Enable",0,"0" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Still AutoContrast",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Video Sharpness Default",0,"20" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Video Sharpness Enable",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Video Prefilter",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Video Prefilter Compressed",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Video Noise Core Min",0,"15" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"AutoExposure Enable",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"AutoExposure Target Default",0,"100" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID%,"Flicker Filter",0,"60" ;--------------------------END First Product--------------------------------------------------------- ;---------------------------------------------------------------------------------------------------- ;--------------------------SECOND PRODUCT------------------------------------------------------------ HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Brightness Default",0,"6" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Contrast Default",0,"245" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Saturation Default",0,"480" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Sharpness Default",0,"40" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Sharpness Enable",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Prefilter",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Prefilter Compressed",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still Scale UV Enable",0,"0" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Still AutoContrast",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Video Sharpness Default",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Video Sharpness Enable",0,"20" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Video Prefilter",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Video Prefilter Compressed",0,"255" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Video Noise Core Min",0,"15" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"AutoExposure Enable",0,"1" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"AutoExposure Target Default",0,"100" HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID%,"Flicker Filter",0,"60" ;-------------------------------------END ISP CUSTOMIZATION SECTION---------------------------------- ;---------------------------------------------------------------------------------------------------- [Product.Del.Reg] HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ManufacturerName% HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%ProductUSBID% HKLM,Software\Endpoints\TWAIN Data Source\1.0\Cameras\%ProductUSBID% ;---------ACTIVATE THE BELOW IF DRIVER SETS UP 2 PRODUCTS-------------------------------------------- HKLM,Software\Endpoints\Video IPL\1.0\Cameras\%Product2USBID% HKLM,Software\Endpoints\TWAIN Data Source\1.0\Cameras\%Product2USBID% ;---------------------------------------------------------------------------------------------------- [SourceDisksNames] 1="%ProductName% Driver Disk","",1 [SourceDisksFiles] aoxamcap.exe = 1,,,,, AoxSTIAp.exe = 1,,,,, aoxusd.dll = 1,,,,, Ep_CamD.sys = 1,,,,, ep402ref.cat = 1,,,,, ep402refcam.id = 1,,,,, epavisrc.ax = 1,,,,, epdxipl.ax = 1,,,,, EPT_engl.dll = 1,,,,, EPT_fren.dll = 1,,,,, EPT_germ.dll = 1,,,,, EPT_ital.dll = 1,,,,, EPT_japa.dll = 1,,,,, EPT_span.dll = 1,,,,, eptwainu.ds = 1,,,,, eptwainu.ini = 1,,,,, epwavdst.ax = 1,,,,, EPWIAMD.dll = 1,,,,, EPWIAUI.dll = 1,,,,, %CompositeInfName% = 1,,,,, %StillCameraInfName% = 1,,,,, se402sc.sys = 1,,,,, %VideoCameraInfName% = 1,,,,, se402vc.sys = 1,,,,, setup.inf = 1,,,,, UNICOWS.DLL = 1,,,,, driversetup.exe = 1,,,,, eprm16.exe = 1,,,,, [DestinationDirs] Product.del.files=30,%InstallDir% Product.copy.files=30,%InstallDir% Setup.copy.files = 10 Setup.del.files = 10 Twain.del.files = 10,%TwainDir% [Product.copy.files] aoxamcap.exe AoxSTIAp.exe aoxusd.dll Ep_CamD.sys ep402ref.cat ep402refcam.id epavisrc.ax epdxipl.ax EPT_engl.dll EPT_fren.dll EPT_germ.dll EPT_ital.dll EPT_japa.dll EPT_span.dll eptwainu.ds eptwainu.ini EPWIAMD.dll EPWIAUI.dll epwavdst.ax %CompositeInfName% %StillCameraInfName% se402sc.sys %VideoCameraInfName% se402vc.sys setup.inf UNICOWS.DLL [Setup.copy.files] driversetup.exe eprm16.exe [Product.del.files] aoxamcap.exe AoxSTIAp.exe aoxusd.dll Ep_CamD.sys ep402ref.cat ep402refcam.id epavisrc.ax epdxipl.ax EPT_engl.dll EPT_fren.dll EPT_germ.dll EPT_ital.dll EPT_japa.dll EPT_span.dll eptwainu.ds eptwainu.ini EPWIAMD.dll EPWIAUI.dll epwavdst.ax %CompositeInfName% %StillCameraInfName% se402sc.sys %VideoCameraInfName% se402vc.sys setup.inf UNICOWS.DLL [Setup.del.files] driversetup.exe,,,1 eprm16.exe,,,1 [Twain.del.files] EPT_engl.dll,,,1 EPT_fren.dll,,,1 EPT_germ.dll,,,1 EPT_ital.dll,,,1 EPT_japa.dll,,,1 EPT_span.dll,,,1 eptwainu.ds,,,1 eptwainu.ini,,,1 UNICOWS.DLL,,,1 [OEMInfo] File1=%CompositeInfName% File2=%StillCameraInfName% File3=%VideoCameraInfName% HardwareID=USB\VID_0458&PID_7001 HardwareID=USB\VID_03e8&PID_1004 logo=0 Reboot=0 [Strings] ;-----Enter your Manufacturer Name below------------------------------------------------------------- ManufacturerName ="Genius" ;-----Enter your driver installation product name---------------------------------------------------- ;-----------Note: This is the product name when the user is asked for a driver diskette-------------- ProductName = "Genius VideoCAM Live" ;---------------------------------------------------------------------------------------------------- ;-----Product USB ID for Registry Entries------------------------------------------------------------ ;-----Edit the USB ID with your assigned USB ID------------------------------------------------------ ProductUSBID ="0x04587001" Product2USBID ="0x03e81004" ;---------------------------------------------------------------------------------------------------- ;-----Directory into which the files listed in this inf are copied----------------------------------- ;-----Replace the \EndPoints with the name your preferred file copy directory InstallDir ="KYE\VideoCAM" TwainDir ="twain_32\KYE\VideoCAM" ;---------------------------------------------------------------------------------------------------- ;-----INF file names--------------------------------------------------------------------------------- ;-----Enter the names of your .inf files in the "". Make sure they match your driver set .inf names-- CompositeInfName ="VideoCAM.inf" StillCameraInfName ="VideoCAMSC.inf" VideoCameraInfName ="VideoCAMVC.inf" ;----------------------------------------------------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.