ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º º º Compex RL2000 PCI Ethernet Adapter º º Copyright (C) 1997 by PDS. All Rights Reserved. º º º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ INSTALLATION GUIDE ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Windows For Workgroups 3.11 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ a) Start Windows For Workgroups 3.11. b) In the Network folder, choose the Network Setup icon. c) In the Network Setup dialog box, choose the DRIVERS button. d) The Network Drivers box appears. Choose the ADD ADAPTER button. e) The Add Network Adapter box appears. From the list of network adapters, select Unlisted or Updated Network Adapter. f) The Install Driver box appears. Insert driver diskette into floppy drive and type the path of the NDIS driver. Choose the OK button eg. A:\WFW311 g) The Unlisted or Updated Network Adapter box appears. Inside this box, 'Compex RL2000 PCI Ethernet Adapter' appears highlighted. Choose the OK button. h) In the Network Drivers dialog box, 'Compex RL2000 PCI Ethernet Adapter' appears highlighted. Choose the CLOSE button. Note: In the case of multiple adapters, you MUST choose the SETUP button and then select the ADVANCED button to specify the Selected ID. Please refer to 'DRIVER CONFIGURATION PARAMETER' section. i) The Network Setup dialog box appears. Under the Network Driver list, 'Compex RL2000 PCI Ethernet Adapter' appears highlighted. Choose the OK button. j) The Windows setup dialog box appears. Because you are replacing the Enhanced Mode Protocol Manager, choose the YES button. ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ DRIVER CONFIGURATION PARAMETER ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ In Compex RL2000 PCI Ethernet Adapter Setup, users are required to select correct configuration parameter for their multiple network adapters installed in the system. Selected ID - It specifies which adapter the driver is going to control.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.