Diskless and remote boot workstations
v3.03
Installing an EtherExpress(TM) PRO/10+ adapter in a diskless remote boot
workstation
========================================================================
If you purchased a flash-equipped EtherExpress(TM) PRO/10+ adapter, the
Boot ROM is already installed.
If you don't have a flash-equipped adapter, you can order a boot ROM
upgrade kit (Intel product code FLASHUP) and install the Boot ROM
yourself.
Booting the workstation from a network server requires extensive work in
setting up the workstation and the server image files. Refer to the
readme files on the Intel Configuration and Drivers disk and your NOS
documentation, which explain how to set up your workstation to remote
boot from the server.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.