1. ASUS775.ZIP Driver
2. NT40SETU.TXT File Contents

NT40SETU.TXT Driver File Contents (ASUS775.ZIP)

Installing Display Drivers for Windows NT 4.0
After installing your graphics card, Windows NT will default to standard VGA
mode (640 x 480, 16 colors). The procedure below describes how you install
ASUS S3 series display driver for Windows NT.

Installing ASUS S3 series display drivers for Windows NT 4.0.
1. Run the Windows NT Display program located in the Control Panel, under
   "Settings" in the Start menu. Alternatively, position the cursor on the
   background of the desktop, click the right mouse button, then select
   "Properties" from the popup menu.
2. Select the "Settings" page.
3. Select "Display Type...".
4. Select "Change..." from the display options.
5. Select "Have Disk..."
6. NT will prompt you for the correct path, enter the path of driver in CD-ROM
   such as D:\NT40 (assume your CD-ROM drive is letter D).
7. A list of ASUS S3 series video adapters will be displayed. Select
   the one you are using, then click on the "OK" button.
8. Windows NT will once again prompt for confirmation.
   All appropriate files are then copied to the hard disk.
9. Select "Apply" in Control Panel. Restart Windows NT.  Windows NT will start 
   up using the S3 drivers.
10.NT will boot into a default mode and start the Display applet allowing
   for mode selection.