Before you start with the installation process, make sure that the Card Manager software has been successfully installed. For information on installing the Card Manager software, please refer to the appropriate readme file, your Ethernet Adapter manual, or your computer manufacturer. Follow the procedure below to run the PCMCIA/CT II card with Microsoft's Windows for Workgroups(WFW311). This shows how to run WFW311 with the NE2000 driver(or PCM200 driver). 3)Installing either the NE2000 Compatible driver or the PCM200 driver. Method 1: Running WFW with the NE2000 Compatible driver. ================================================= WINDOWS FOR WORKGROUPS 3.11 1. Select NETWORK SETUP program item from program group NETWORK. 2. Select DRIVERS button. 3. Select ADD ADAPTER button. 4. Select NE2000 Compatible NETWORK ADAPTER from adapter menu and choose OK button. 5. Select CLOSE button to end the DRIVERS setup. 6. Select OK button to end the NETWORK setup. Method 2: Running WFW with the PCM200 driver. ======================================= The OEMSETUP.INF file allow you to run Microsoft Windows for Workgroups with the PCMCIA/CT II Ethernet LAN Adapter. The installation procedure is as fellows: WINDOWS FOR WORKGROUPS 3.11 1. Select NETWORK SETUP program item from program group NETWORK. 2. Select DRIVERS button. 3. Select ADD ADAPTER button. 4. Select UNLISTED OR UPDATED NETWORK ADAPTER from adapter menu and choose OK button. 5. Insert disk contains PCM200.DOS, PCM200.386 and OEMSETUP.INF in driver. 6. Specify the path (A:\WFW311) and choose OK button. 7. Select "PCMCIA/CT II Ethernet" from adapter menu and choose OK button. 8. Select CLOSE button to end the DRIVERS setup. 9. Select OK button to end the NETWORK setup. 4) Exit Windows for Workgroups and reboot your PC. This completes the Windows for Workgroups installation. Before installing the PCMCIA/CT II Ethernet LAN into workstation, you have to append the following lines into config.sys and autoexec.bat file or it would look like the following. < Sample CONFIG.SYS file > DEVICE=C:\DOS\SETVER.EXE DEVICE=C:\WFW311\HIMEM.SYS DEVICE=C:\DOS\EMM386.EXE X=D000-D0FF RAM NOEMS DOS=HIGH,UMB FILES=30 BUFFERS=20 REM CardSoft(TM) 3.1 PCMCIA DRIVERS DEVICEHIGH=C:\CARDSOFT\SS365SL.EXE DEVICEHIGH=C:\CARDSOFT\CS.EXE /POLL:1 DEVICEHIGH=C:\CARDSOFT\CSALLOC.EXE DEVICEHIGH=C:\CARDSOFT\CARDID.EXE DEVICEHIGH=C:\CARDSOFT\ECARDCS.EXE /IRQ=5 /IO=300 STACKS=9,256 DEVICE=C:\WINDOWS\IFSHLP.SYS LASTDRIVE=Z < Sample AUTOEXEC.BAT file > @ECHO OFF PROMPT $p$g PATH C:\WINDOWS; SET TEMP=C:\WINDOWS\TEMP C:\WINDOWS\SMARTDRV.EXE C:\WINDOWS\NET START ========================= CALL C:\NET\ODI\STARTNET.BAT ; only for ODI driver C:\WINDOWS\ODIHLP ; only for ODI driver < Sample STARTNET.BAT file > CD \NET\ODI SET NWLANGUAGE=ENGLISH LSL PCM200 IPXODI /A VLM CD \ < Sample NET.CFG file > LINK SUPPORT BUFFERS 8 1514 Max Boards 4 Max Boards 4 Link Driver PCM200 PORT 300 INT 5 Frame Ethernet_802.2 Frame Ethernet_802.3 NetWare DOS Requester FIRST NETWORK DRIVE = F PB BUFFERS=3 < Sample PROTOCOL.INI file > [network.setup] version=0x3110 netcard=PCM200,1,PCM200,3 transport=ms$nwlinknb,NWLINK transport=ms$ndishlp,MS$NDISHLP transport=ms$netbeui,NETBEUI lana0=PCM200,1,ms$netbeui lana1=PCM200,1,ms$nwlinknb lana2=PCM200,1,ms$ndishlp [protman] DriverName=PROTMAN$ PRIORITY=MS$NDISHLP [PCM200] DriverName=PCM200$ Adapters=PCM200 IOBASE=0x300 INTERRUPT=5 [NWLINK] BINDINGS=PCM200 [MS$NDISHLP] DriverName=ndishlp$ BINDINGS=PCM200 [NETBEUI] DriverName=netbeui$ SESSIONS=10 NCBS=12 BINDINGS=PCM200 LANABASE=0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.