1. En2000.zip Driver
2. SVR311.TXT File Contents

SVR311.TXT Driver File Contents (En2000.zip)

Server Driver for NetWare 3.11

Introduction:
-------------
This document describes the procedure to install the NetWare v3.11
server driver for EN2000 Ethernet adapter.

Location of Driver:     \NETWARE\311\EN2000.LAN

Installation Procedure:
-----------------------
   Before you start with the installation  process,  make sure that
   the Novell NetWare 386 v3.11 server is properly installed.
   Similarly, your adapter should also be properly installed in your
   workstation.

   1. If you can log into the server as a supervisor , copy EN2000.LAN
      relative files from the EN2000 Driver Diskette subdirectory
      A:\NETWARE\311 into the NetWare 386 subdirectory SYSTEM of your
      server. (If some files exists, rename the existing files in the
      SYSTEM subdirectory).

   2. Run SERVER.EXE from your server. You will see a series of
      NetWare messages on screen.

   3. When the NetWare 386 prompt appears (indicated by a colon),load
      your server driver. Simply type:

      : LOAD LSLENH <Enter>
      : LOAD EN2000 PORT=300 INT=5 <Enter>

      or, you can directly load file from EN2000 driver disk :

      : LOAD A:\NETWARE\311\LSLENH <Enter>
      : LOAD A:\NETWARE\311\EN2000 PORT=300 INT=5 <Enter>

   4. Bind IPX to the adapter driver. At the NetWare server prompt
      ,type:

      :BIND IPX TO EN2000 NET=11 <Enter>

   5. After pressing <Enter> the computer prompts you for the Network
      Number. For details on how to assign this number,please consult
      your NetWare 386 Installation Manual.

   6. Add the load and bind statements you require to the server's
      AUTOEXEC.NCF file so that the LAN driver will load automatically
      each time the server starts up.


NOTES:
------
   1. Installing Multiple LAN Adapters:
      Example:

      LOAD EN2000 PORT=300 INT=5 FRAME=Ethernet_802.2 NAME=E1
      BIND IPX TO E1 NET=11
      LOAD EN2000 PORT=300 INT=5 FRAME=Ethernet_802.3 NAME=E2
      BIND IPX TO E2 NET=22

   2. Installing One LAN Adapter with Multiple Frame Types:
      When  binding multiple frame types to one adapter, enter a LOAD
      and BIND statement for each frame type. Each LOAD statement will
      use a different network number is required on the bind statement.
      You need  to supply  a name on each load line in order to avoid
      being  prompted  for which  board to bind IPX to. If you do not
      have the name option in the AUTOEXEC.NCF , it will not  execute
      completely without user intervention.  Example:

        LOAD EN2000 PORT=300 INT=5 FRAME=ETHERNET_802.3 NAME=E8023
        BIND IPX TO E8023 NET=111
        LOAD EN2000 PORT=300 INT=5 FRAME=ETHERNET_802.2 NAME=E8022
        BIND IPX TO E8022 NET=222

If problems occur during the binding process, your screen will prompt
you with error messages. Please refer to your NetWare 386 manual for
details on these messages.