-------------------------------------------------------------------------
How to install drivers ?
-------------------------------------------------------------------------
One of the two methods listed below can be used to install driver:
I. Use INSTALL.BAT under Windows 95 environment.
OR
II. Use the following sequence step by step:
. Popup 'Control Panel' and open 'Add New Hardware'.
. Choice 'Next'.
. Switch to 'No' - don't let Windows to search for your new hardware, and
click 'Next'.
. Select 'Hard disk controller' and click 'Next'.
. Click the button 'Have Disk' ( or press Alt+H ).
. Make sure the install disk is in drive A(or drive B), and then click 'OK'.
. A 'Select Device' dialog box will be popup.
. Select the device that you wish to install and click 'Next'.
. After this install procedure is complete, you may need to restart the computer.
-------------------------------------------------------------------------
How to uninstall drivers ?
-------------------------------------------------------------------------
Use UNINSTAL.BAT under Windows 95 environment.
-------------------------------------------------------------------------
Attention :
-------------------------------------------------------------------------
1. When the Win95 install the software for primary and secondary channel
for IDE driver, please DO NOT RESTART COMPUTER after Win95 just finish
primary channel. Let Win95 continue to install software for secondary
channel. After secondary channel is finished, the RESTART COMPUTER
to let new installed IDE driver to take effect.
2. If you have any DOS Real-mode driver on your system. It will be conflict
between TX Pro Bus Master IDE Driver and a Real-mode ATAPI CD-ROM or
IDE device driver. ALL REFERENCES TO REAL-MODE DRIVERS (IDE or ATAPI)
IN THE AUTOEXEC.BAT AND CONFIG.SYS SHOULD BE REMOVED.
3. Sometimes, the TX Pro IDE controller has already been installed with the
standard driver provided by Microsoft. In order to use TX Pro IDE
controller with the driver we provided, it is necessary to remove the
standard driver from "Control Panel/System/Device Manager".
4. This version support Ultra-33 feature.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.