[Identification] OptionType = NetAdapter [PlatformsSupported] ISA EISA "Jazz-Internal Bus" [Options] EP312V [FileConstants] UtilityInf = "UTILITY.INF" ParamInf = "NCPARAM.INF" subroutineinf = "SUBROUTN.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "SURECOM" ProductMajorVersion = "3" ProductMinorVersion = "5" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "EP312V" ProductSoftwareImagePath = "\SystemRoot\System32\drivers\EP312V.sys" NetRuleSoftwareType = "EP312VSys ndisDriver EP312VDriver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """EP312VSys"" yes no container" NetRuleSoftwareClass = {"EP312VDriver basic"} NetRuleSoftwareBindable = {"EP312VDriver EP312VAdapter non exclusive 100"} ProductHardwareName = "EP312V" NetRuleHardwareType = "EP312V EP312VAdapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"EP312VAdapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers [date] Now = {} ? $(!LIBHANDLE) GetSystemDate [Identify] read-syms Identification set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) [ReturnOptions] set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) ifstr(i) $($1) == "" goto returnoptions endif set PlatformList = ^(PlatformsSupported, 1) Ifcontains(i) $($1) in $(PlatformList) goto returnoptions else set Status = STATUS_NOTSUPPORTED goto finish_ReturnOptions endif else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif returnoptions = + set OptionList = ^(Options, 1) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) [InstallOption] set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE endif set-subst LF = "\n" read-syms GeneralConstants read-syms FileConstants read-syms DialogConstants$(!STF_LANGUAGE) ifstr(i) $(!NTN_Origination) == "NCPA" set Continue = $(OK) endif read-syms FileConstants$(!STF_LANGUAGE) detect date set-title $(FunctionTitle) set to = Begin set from = Begin set CommonStatus = STATUS_SUCCESSFUL EndWait Begin = + ; set ActivateDetection = FALSE ;Philip-DEBUG 042496 BEGIN ;set this variable to 1 to enable debug output set !G:DebugOutputControl = 0 Debug-Output "Debug output enabled." ;Philip-DEBUG END Ifstr(i) $(!NTN_InstallMode) == deinstall set StartLabel = removeadapter else-Ifstr(i) $(!NTN_InstallMode) == Update set StartLabel = UpgradeSoftware else-Ifstr(i) $(!NTN_InstallMode) == bind set StartLabel = bindingadapter else-Ifstr(i) $(!NTN_InstallMode) == configure set CommonStatus = STATUS_REBOOT ; set ActivateDetection = TRUE set StartLabel = configureadapter Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "Cannot configure the PNP driver software." Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif set Error = $($R0) set from = end set to = end goto nonfatalinfo endif else set StartLabel = installadapter set OEM_ABANDON_OPTIONS = {} set OEM_ABANDON_SOFTWARE = FALSE set OEM_ABANDON_ON = TRUE ; set ActivateDetection = TRUE endif set IOBaseAddressList = ^(IOBaseChoices, 1) set IOBaseAddressValueList = ^(IOBaseChoices, 2) set IOBaseAddress = *($(IOBaseAddressList), 8) ;Philip-AUTO set IRQList = ^(IRQChoices, 1) set IRQValueList = ^(IRQChoices, 2) set IRQ = *($(IRQList), 9) ;Philip-AUTO set DUPLEXList = ^(DUPLEXChoices, 1) set DUPLEXValueList = ^(DUPLEXChoices, 2) set DUPLEX = *($(DUPLEXList), 1) set RadioET = 2 set RadioER = 4 set PNPID = "" ; Philip 101195 END skipdetection =+ set from = $(fatal) set to = $(fatal) goto $(StartLabel) installadapter = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) ifstr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif goto end else Shell $(UtilityInf), CardExistedDlg ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error: cannot get an error string." goto ShellCodeError endif ifstr(i) $($R1) != "OK" set CommonStatus = STATUS_USERCANCEL goto end endif set OldVersionExisted = $(TRUE) endif endif ;Philip-HELP BEGIN ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) install "Install-Help" endif ;Philip-HELP END goto adapteroptions configureadapter = + Ifstr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component product key" goto fatalregistry Endif Endif Debug-Output "INF: Shelling to FindService" Shell $(UtilityInf) FindService, $(KeyProduct) Ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "INF: FindService shell failure" Goto ShellCodeError Endif Ifstr(i) $($R0) != NO_ERROR Debug-Output "INF: FindService Shell error: "$($R0) Goto fatalregistry endif set KeyParameters = $($R2) CloseRegKey $($R1) Ifstr $(KeyParameters) == $(KeyNull) set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "Cannot find component service" goto fatalregistry endif set OldVersionExisted = $(TRUE) set ValueName = "" set ValueData = "" set ValueStr = "" set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) set ValueItem = $($) set ValueName = *($(ValueItem),1) set ValueData = *($(ValueItem),4) Ifstr(i) $(ValueName) == "InterruptNumber" set IRQValue = $(ValueData) else-ifstr(i) $(ValueName) == "IoBaseAddress" set IOBaseAddressValue = $(ValueData) else-ifstr(i) $(ValueName) == "BusType" set BusInterfaceType = $(ValueData) else-ifstr(i) $(ValueName) == "BusNumber" set BusNumber = $(ValueData) else-Ifstr(i) $(ValueName) == "PNPID" ; Philip 101195 BEGIN set PNPID = $(ValueData) else-Ifstr(i) $(ValueName) == "EarlyTransmit" set ETFlag = $(ValueData) else-Ifstr(i) $(ValueName) == "EarlyReceive" set ERFlag = $(ValueData) else-Ifstr(i) $(ValueName) == "FullDuplex" set FDFlag = $(ValueData) endif EndForListDo ifstr(i) $(IRQValue) == "" set IRQValue = *($(IRQValueList), 9) ;Philip-AUTO endif set IRQ = *($(IRQList), ~($(IRQValueList), $(IRQValue))) ifstr(i) $(IOBaseAddressValue) == "" set IOBaseAddressValue = *($(IOBaseAddressValueList), 8) ;Philip-AUTO endif set IOBaseAddress = *($(IOBaseAddressList), ~($(IOBaseAddressValueList),+ $(IOBaseAddressValue))) ifstr(i) $(FDFlag) == "" set FDFlag = *($(DUPLEXValueList), 1) endif set DUPLEX = *($(DUPLEXList), ~($(DUPLEXValueList), $(FDFlag))) Ifstr(i) $(ETFlag) == "" set ETFlag = 0 endif Ifint $(ETFlag) == 1 set RadioET = 1 else set RadioET = 2 endif Ifstr(i) $(ERFlag) == "" set ERFlag = 0 endif Ifint $(ERFlag) == 1 set RadioER = 3 else set RadioER = 4 endif goto adapteroptions adapteroptions = + set from = adapteroptions ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" ifstr(i) $(!AutoNetInterfaceType) != "" set BusInterfaceType = $(!AutoNetInterfaceType) else set BusInterfaceType = 1 endif ifstr(i) $(!AutoNetBusNumber) != "" set BusNumber = $(!AutoNetBusNumber) else set BusNumber = 0 endif goto adapterverify endif read-syms FileDependentDlg$(!STF_LANGUAGE) SetHelpFile "EP312V.hlp" 0 6 0 ;Philip-HELP ui start "InputDlg" ifstr(i) $(DLGEVENT) == "CONTINUE" set IRQ = $(Combo1Out) ; Philip 101195 BEGIN set IOBaseAddress = $(Combo2Out) set DUPLEX = $(Combo3Out) IfContains "1" IN $(RadioOut) set ETFlag = 1 else-IfContains "2" IN $(RadioOut) set ETFlag = 0 endif IfContains "3" IN $(RadioOut) set ERFlag = 1 else-IfContains "4" IN $(RadioOut) set ERFlag = 0 endif set PNPID = *($(EditTextOut),1) ; Philip 101195 END ui pop 1 else-ifstr(i) $(DLGEVENT) == "BACK" set CommonStatus = STATUS_USERCANCEL Debug-Output "Action: exit. Bye." ui pop 1 goto end else ui pop 1 Debug-Output "Action: unknown. Bye." goto end endif set BusInterfaceType = 1 set BusNumber = 0 adapterverify =+ ifint $(OldVersionExisted) == $(TRUE) ifstr(i) $(!NTN_InstallMode) == configure goto writeparameters endif endif StartWait ifint $(OldVersionExisted) == $(FALSE) ifstr(i) $(!NTN_InstallMode) == "install" Ifstr(i) $(DoCopy) == "YES" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES Ifint $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-Ifstr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) Goto fatal Else-Ifstr(i) $($R0) == STATUS_USERCANCEL Goto successful Endif Set SrcDir = $($R1) Endif install "Install-Option" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal endif endif Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) set KeyProduct = $($R1) Set SoftNetRulesKey = $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add software components" CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add value list." CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) goto fatalregistry endif set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) CloseRegKey $(KeyProduct) CloseRegKey $(SoftNetRulesKey) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." goto fatalregistry endif endif Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) ifint $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) endif ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Cannot add hardware component" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Registry error: add hardware component" CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) goto fatalregistry endif set KeyParameters = $($R3) set KeyAdapterRules = $($R2) set AdapterNumber = $($R4) set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif CloseRegKey $($R1) set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "Resgitry error: add value list." CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) goto fatalregistry endif CloseRegKey $(KeyAdapterRules) goto writeparameters writeparameters = + ; Philip 101195 BEGIN set IOBaseAddressValue = *($(IOBaseAddressValueList), ~($(IOBaseAddressList),+ $(IOBaseAddress))) set IRQValue = *($(IRQValueList), ~($(IRQList), $(IRQ))) set FDFlag = *($(DUPLEXValueList), ~($(DUPLEXList), $(DUPLEX))) set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+ {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {PNPID,$(NoTitle),$(!REG_VT_SZ),$(PNPID)},+ {FullDuplex,$(NoTitle),$(!REG_VT_DWORD),$(FDFlag)},+ {EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),$(ETFlag)},+ {EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),$(ERFlag)},+ {NTFlag,$(NoTitle),$(!REG_VT_DWORD),1},+ ;Philip-SYNC {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOBaseAddressValue)}} ; Philip 101195 END Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList) ifstr(i) $(!STF_GUI_UNATTENDED) == "YES" Shell $(UtilityInf),AddDefaultNetCardParameters,$(KeyParameters) endif CloseRegKey $(KeyParameters) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error." goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "Registry error: Add value list" goto fatalregistry endif EndWait goto successful bindingadapter =+ set Error = "Binding: Sorry, not yet implemented." goto fatal removeadapter = + Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase) Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif else Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $(!NTN_RegBase) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end UpgradeSoftware = + OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct Ifstr $(KeyProduct) != $(KeyNull) install "Install-Update" ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS goto fatal endif SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} CloseRegKey $(KeyProduct) else goto fatalregistry endif goto end successful = + goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif EndForListDo Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "ShellCode error" goto ShellCodeError endif set RegistryErrorIndex = $($R0) Ifstr(i) $(RegistryErrorIndex) != NO_ERROR goto fatalregistry endif endif goto end warning = + Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(to) else-ifstr(i) $($R1) == "CANCEL" goto $(from) else goto "end" endif nonfatalinfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS goto nonfatalmsg nonfatal = + Set Severity = NONFATAL goto nonfatalmsg nonfatalmsg = + ifstr(i) $(Error) == "" Set Severity = NONFATAL Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif ifstr(i) $($R1) == "OK" goto $(from) else goto "end" endif fatalregistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) goto fatal fatal = + ifstr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif set Error = $($R0) endif Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) ifint $($ShellCode) != $(!SHELL_CODE_OK) goto ShellCodeError endif goto setfailed ShellCodeError = + set DlgType = "MessageBox" set STF_MB_TITLE = $(ShellCodeErrorTitle) set STF_MB_TEXT = $(ShellCodeErrorText) set STF_MB_TYPE = 1 set STF_MB_ICON = 3 set STF_MB_DEF = 1 ui start "Error Message" goto setfailed setfailed = + set CommonStatus = STATUS_FAILED ifstr(i) $(OEM_ABANDON_ON) == TRUE set OEM_ABANDON_ON = FALSE goto abandon endif goto end end = + goto term term = + Return $(CommonStatus) [Install-Option] set STF_VITAL = "" ifstr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers endif ifstr(i) $(DoCopy) == "YES" set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList endif ifstr(i) $(DoConfig) == "YES" endif Exit ;Philip-HELP BEGIN [Install-Help] set STF_VITAL = "" AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH) set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList Exit ;Philip-HELP END [Install-Update] set STF_VITAL = "" set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers exit [Source Media Descriptions] 1 = "Windows NT Workstation CD-ROM or Setup Disk #1", TAGFILE = disk1.w 2 = "SURECOM EP-312V Ethernet Adapter Driver Setup Diskette" , TAGFILE = disk1 [Signature] FileType = MICROSOFT_FILE [GetSignature] read-syms Signature return $(FileType) [ProductType] STF_PRODUCT = Winnt STF_PLATFORM = I386 [Files-Inf] 2, oemsetup.inf, SIZE=30000, RENAME=$(!UG_Filename) [Files-EP312V] 2, EP312V.SYS, SIZE=200000 ;Philip-HELP BEGIN [Files-Hlp] 2,EP312V.HLP , SIZE=30000 ;Philip-HELP END [LanguagesSupported] ENG [OptionsTextENG] EP312V = "SURECOM EP-312V Ethernet Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "SURECOM EP-312V Ethernet Network Card Setup" ProductSoftwareDescription = "SURECOM EP-312V Ethernet Adapter Driver" ProductHardwareEP312VDescription = "SURECOM EP-312V Ethernet Adapter" ProductSoftwareTitle = "SURECOM EP-312V Ethernet Adapter Driver" ProductHardwareEP312VTitle = "SURECOM EP-312V Ethernet Adapter" ShellCodeErrorTitle = "Error: "$(FunctionTitle) ShellCodeErrorText = "Shell Code Error." [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [FileDependentDlgENG] Label1 = "&IRQ Level:" Label2 = "I/O &Port Address:" Label3 = "&Duplex:" ; Philip 101195 BEGIN Group1 = "Early &Transmit" Group2 = "Early &Receive" Radio1 = "Enable" Radio2 = "Disable" Radio3 = "Enable" Radio4 = "Disable" DlgType = "RadioCombination" DlgTemplate = "PROTEON" ; Philip 101195 Caption = $(FunctionTitle) Combo1List = $(IRQList) Combo1Out = $(IRQ) Combo2List = $(IOBaseAddressList) Combo2Out = $(IOBaseAddress) Combo3List = $(DUPLEXList) Combo3Out = $(DUPLEX) ComboListItemsIn = {Combo1List, Combo2List, Combo3List} ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out} ;ComboListItemsIn = {Combo1List, Combo2List} ;ComboListItemsOut = {Combo1Out, Combo2Out} RadioIn = {$(RadioET), $(RadioER)} Edit1Label = "P&NP ID:" EditTextIn = $(PNPID) EditTextLim = 12 CBOptionsGreyed = {} RadioOptionGreyed = {} NotifyFields = {NO, NO, NO} ;NotifyFields = {NO, NO} HelpContext = 0 ; Philip-HELP [IOBaseChoices] IOBase_1 = "0x240", 576 IOBase_2 = "0x280", 640 IOBase_3 = "0x2c0", 714 IOBase_4 = "0x300", 768 IOBase_5 = "0x320", 800 IOBase_6 = "0x340", 832 IOBase_7 = "0x360", 864 IOBase_8 = "Auto", 896 ;Philip-AUTO [IRQChoices] IRQ_1 = "3", 3 IRQ_2 = "4", 4 IRQ_3 = "5", 5 IRQ_4 = "9", 9 IRQ_5 = "10", 10 IRQ_6 = "11", 11 IRQ_7 = "12", 12 IRQ_8 = "15", 15 IRQ_9 = "Auto", 2 ;Philip-AUTO [DUPLEXChoices] DUPLEX_1 = "Half", 0 DUPLEX_2 = "Full", 1 ; Philip 101195 ENDDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.