Nov 1995
EZ-2000+ Series Ethernet Card
Packet Driver for FTP PC/TCP Installation
=========================================
****************************************
* Packet Driver Program for FTP PC/TCP *
****************************************
The packet driver programs above let you run FTP's PC/TCP with the EZ-2000+
Series Ethernet Card. Two methods can be used:
METHOD 1:
If you use the EZ2000.SYS program, the following statement must
be included in your CONFIG.SYS file:
DEVICE = EZ2000.SYS [/option] <packet_int_no>
This statement may be placed anywhere in the CONFIG.SYS file.
METHOD 2:
If you use the EZ2000.COM program, follow the procedure below:
1. Execute the EZ2000.COM as follows:
>EZ2000 [/option] <packet_int_no>
2. Execute the ETHDRV.EXE and IDRIVE.EXE device driver program (provided
by FTP).
You are now ready to use FTP's PC/TCP.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.