1. ez2000.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (ez2000.zip)

								Nov 1995

			
                         AR-2000 Series Ethernet Card
                     NDIS Driver for BANYAN VINES Installation
		     =========================================

******************************************************
* How to install EZ2000.DOS on Banyan VINES v4.00(2) *
******************************************************

NOTE : To install AR-2000 NDIS driver program, you need Banyan VINES v4.00(2)
       or above.

1. Create a bootable diskette (booted with DOS 3.1 or above) which will be used
   as boot diskette of Banyan VINES workstation or create a sub-directory on
   your hard disk.

   There are two methods to copy the required files for Banyan VINES workstation
   to the bootable diskette or sub-directory of hard disk.

   Method 1.
       1) Execute 'INSTALL' command which was saved in the diskette labeled
	  "VINES MASTER DISK".
       2) Follow the instructions to copy the files to the bootable diskette
	  or sub-directory of hard disk.

   Method 2.
       1) Execute 'BAN' command.
       2) Login VINES system.
       3) Execute 'PCCOPY' command.
       4) Select 'NDIS Ethernet' item and follow instructions as menu driven
	  for copying the files to the bootable diskette or sub-directory of
	  hard disk.


2. Insert the AR-2000 series driver program diskette in drive 'A' and insert
   the ard prepared bootable diskette in drive 'B'. Afterwards, copy the
   appropriate NDIS driver files EZ2000.DOS from drive 'A' to 'B' or
   sub-directory of hard disk.


3. Create a CONFIG.SYS file which contains the following statements:

	DEVICE=PROTMAN.DOS /I:A:\
	DEVICE=EZ2000.DOS

    NOTE:" A:\" is the path which may be changed depending on the location
	  of the files for Banyan VINES workstation.


4. Create a EZ2000.NIF file and include the following statements in this file:

	Model = AR-2000 Series Ethernet Card
	Path = A:\
	DeviceDriver = EZ2000.DOS
	DeviceName = EZ2000$
	Type = NDIS

    NOTE:" A:\" is the path which may be changed depending on the location
	  of the files for Banyan VINES workstation.


5. Create a PROTOCOL.INI file as follows:

	[PROTOCOL MANAGER]
	drivername = PROTMAN$

	[VINES_XIF]
	drivername = NDISBAN$
	bindings = "EZ2000"

	[EZ2000]
	drivername = EZ2000$

6. Execute 'PCCONFIG' command

   1) The "CONFIGURING A PC FOR THE NETWORK" is displayed on the screen
      then select item '1 - Network Card Settings'.
		    |
      The "Network Card Setting" is displayed on the screen
      then select item 'NDIS Ethernet'.
		    |
      The "NDIS Ethernet" is displayed on the screen
      then set your choice for AR-2000 NIC
	   Ex. Interrupt Level (2-15) : 3
	       PROTOCOL.INI bindings = EZ2000
		    |
   2) Return to Screen "CONFIGURING A PC FOR THE NETWORK"
      then select item '2 - Login Environment Settings'.
		    |
      The "Network Card Setting" is displayed on the screen
      then select item 'NDIS Ethernet'.
		    |
      then 'PCCONFIG.DB' file will be generated.

7. Reboot your computer.

8. Login into VINES by executing the 'BAN' command.