1. gcs1-203.zip Driver
2. INS_DEC.TXT File Contents

INS_DEC.TXT Driver File Contents (gcs1-203.zip)

DEC PATHWORKS
=============
Installation Procedures for the Following Networks:

    DEC Pathworks (Version 4.0)
    DEC Pathworks (Version 4.1)


******************************************************************************
*   DEC Pathworks (Vserion 4.0)
******************************************************************************

1.  Run NETSETUP.

2.  Select "Ethernet Board".

3.  Select "Other".

4.  Select NDIS driver.

5.  Insert your Driver Diskette into the A: driver.

6.  Enter the path to the driver file as follows:

        A:\NDIS\GCS1NDIS.DOS

7.  Select PROTOCOL.INI.

8.  Enter the path to the PROTOCOL.INI file as follows:

        A:\DEC

9.  Continue with installation.

10. Reboot the PC.


******************************************************************************
*   DEC Pathworks (Vserion 4.1)
******************************************************************************

1.  Run NETSETUP.

2.  Choose Ethernet controller type and select "Other NDIS".

3.  Choose "Other NDIS Information".

4.  Insert your Driver Diskette into the A: driver.

5.  Enter the path to the driver file as follows:

        A:\NDIS\GCS1NDIS.DOS

6.  Enter the path to the PROTOCOL.INI file as follows:

        A:\DEC

7.  Continue with installation.

8.  Reboot the PC.


------------------------------------------------------------------------------
    Example CONFIG.SYS and PROTOCOL.INI files
------------------------------------------------------------------------------

CONFIG.SYS:

	break on
	Files=40
	buffers=30
	device=c:\pwtcp.sys
	device=c:\protman.exe
	device=c:\gcs1ndis.dos
	stacks=9,256
	lastdrive=z


PROTOCOL.INI:

[PROTOCOL MANAGER]
  DRIVERNAME=PROTMAN$
	
[IPX4MAC]
  DRIVER=IPX$MAC
  BINDINGS=GCS1000_NIF

[DATALINK]
  DRIVERNAME= DLL$MAC
  LG_BUFFERS=16
  SM_BUFFERS=6
  OUTSTANDING=32
  HEURISTICS=0
  BINDINGS=GCS1000_NIF
  NI_IRQ=4


Setting up files

Make a directory \DECNET on your hard disk, a floppy, or
whatever the CURRENT disk is.  (if you're on E:, make E:\DECNET)
Copy the files from the floppy into this directory.

Copy or RENAME one of the .DAT files to DECPARM.DAT -If you
receive a message from DLLNDIS that says it couldn't find your 
DECPARM.DAT file, be sure it's on \DECNET on the current disk.
(this can be moved if you want).
	

AUTOEXEC.BAT:

DLLNDIS			DLL->NDIS driver
NETBIND			
SCH			Load PATHWORKS network scheduler
DNNETH			Load DECnet network process

ANOTHER SAMPLE AUTOEXEC.BAT (different configuration).

DLLNDIS
NDIS -d:2
PWBIND
SCH
DNNETH
REDIR5
setname joebob
use f: \\au1\pcsav41
use m: \\drie01\joebob%%joebob *
emsload lat

------------------------------------------------------------------------------