1. um90008f.zip Driver
2. VINES.TXT File Contents

VINES.TXT Driver File Contents (um90008f.zip)

   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
   ³                    Installation for Banyan VINES                       ³
   ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ


   1. Create a bootable diskette (booted with DOS 3.1 or above) which will be
      used as boot diskette of Banyan VINES workstation or create a
      sub-directory on your hard disk.

      NOTE : To install the NDIS driver program, you need BANYAN VINES
             v4.00(2) or above.

      There are two methods to copy the required files for Banyan VINES
      workstation to the bootable diskette or sub-directory of hard disk.

      Method 1.
          1) Execute 'INSTALL' command which was saved in the diskette
             labeled "VINES MASTER DISK".
          2) Follow the instructions to copy the files to the bootable
             diskette or sub-directory of hard disk.

      Method 2.
          1) Execute 'BAN' command.
          2) Login VINES system.
          3) Execute 'PCCOPY' command.
          4) Select 'NDIS Ethernet' item and follow instructions as menu
             driven for copying the files to the bootable diskette or
             sub-directory of hard disk.

   2. Insert the driver diskette in drive 'A' and insert the prepared
      bootable diskette in drive 'B'. Afterwards, copy the appropriate NDIS
      driver files UM9008.DOS from drive 'A' to 'B' or sub-directory of hard
      disk.

   3. Create a CONFIG.SYS file which contains the following statements:

          device=protman.dos /i:c:\
          device= [drive]:\path\UM9008.DOS


      NOTE: "A:\" is the path which may be changed depending on the location
            of the files for BANYAN VINES workstation.

   4. Create a UM9008.NIF file and include the following statements in this
      file:

           Model = Pnp Ethernet Card with UM9008
           Path = A:\
           DeviceDriver = UM9008.DOS
           DeviceName = UM9008$
           Type = NDIS

      NOTE: "A:\" is the path which may be changed dependeding on the
            location of the files for BANYAN VINES workstation.

   5. Create a PROTOCOL.INI file as follows:

           [PROTOCOL MANAGER]
           drivername = PROTMAN$

           [VINES_XIF]
           drivername = NDISBAN$
           bindings = "UM9008"

           [UM9008]
           drivername = UM9008$

   6. Execute 'PCCONFIG' command

      1) When "CONFIGURING A PC FOR THE NETWORK" is displayed on the screen
         then select item '1 - Network Card Settings'.
                            |
         When "Network Card Setting" is displayed on the screen
         then select item 'NDIS Ethernet'.
                            |
         When "NDIS Ethernet" is displayed on the screen
         then set your choice for UM9008
              Ex. Interrupt Level (2-15) : 3
                  PROTOCOL.INI bindings = UM9008
                            |
      2) Return to Screen "CONFIGURING A PC FOR THE NETWORK"
         then select item '2 - Login Environment Settings'.
                            |
         The "Network Card Setting" is displayed on the screen
         then select item 'NDIS Ethernet'.
                            |
         Then 'PCCONFIG.DB' file will be generated.

   7. Reboot your computer.

   8. Login into VINES by executing the 'BAN' command.