;---------------------------------------- ; This version is modified by FN-LASAT 961010 ; MAXCARRIERSPEED has been changed to be the same as MAXCONNECTSPEED ; on all LASAT modems, because Win NT use this speed to make dialback ; connections. ; LASAT unique 640i has been ajusted to also work with DIGIBOARDS. ;--------------------------------------------------- ; Modem responses are normally located in the global [Modem Responses] ; section. Most modems will return one of the responses listed in the ; global responses section. If you encounter a modem with a different ; response sequence than any of the responses already listed, add that ; new sequence to the global modem respone section. You may also put new ; modem response sequences immediately following the command section of ; a specific modem. Such responses are checked before the global ; responses. ; ; Individual modems will have separate command sections. Modems with ; identical command sequences can be aliased. E.g., if modem 2 has the ; same command sequences as modem 1, then modem 2's section might be ; as follows: ; ; [modem 2] ; alias=modem 1 ; ; Aliases to aliased sections are not allowed. In other words, in the ; example given above, if you have "modem 3" which also has an identical ; command sequence to modem 1 and modem 2, you can alias modem 3 to ; modem 1, but you cannot alias modem 3 to modem 2. ;---------------------------------------- [Responses] ;---------------------------------------- ;OK, ERROR, NO DIALTONE, NO CARRIER, etc ;---------------------------------------- OK=<cr><lf>OK<cr><lf> OK=<hFF><cr><lf>OK<cr><lf> LOOP=<cr><lf>RING<cr><lf> LOOP=<cr><lf>RRING<cr><lf> LOOP=<cr><lf>RINGING<cr><lf> LOOP=<cr><lf>DIALING<cr><lf> ERROR=<cr><lf>ERROR<cr><lf> ERROR=<cr><lf>ABORTED<cr><lf> ERROR_NO_CARRIER=<cr><lf>NO CARRIER<cr><lf> ERROR_VOICE=<cr><lf>VOICE<cr><lf> ERROR_NO_DIALTONE=<cr><lf>NO DIALTONE<cr><lf> ERROR_NO_DIALTONE=<cr><lf>NO DIAL TONE<cr><lf> ERROR_BUSY=<cr><lf>BUSY<cr><lf> ERROR_NO_ANSWER=<cr><lf>NO ANSWER<cr><lf> ERROR_NO_PROMPTTONE=<cr><lf>NO PROMPTTONE<cr><lf> ;PDI modem ERROR=<cr><lf>ERROR DATA Button not defined<cr><lf> ;---------------------------------------- ;CONNECT responses with APPEND macro come first to force proper match ;---------------------------------------- ;Zoom V32bis modem CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAPM<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;ATI modems, Hayes V Series; Practical CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;Stray char (0xFF) appears from time to time. CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><hFF> CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP<cr><lf>\ <cr><lf>COMPRESSION: CLASS 5<cr><lf><cr>\ <lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP<cr><lf>\ <cr><lf>COMPRESSION: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V.42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;Next connect response occasionally occurs on Practical Peripherals 9600SA CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROT<hFF>OCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V.42/LAPM<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAPM<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V.42/LAPM<cr><lf>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf><cr>\ <lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V.42/LAPM<cr><lf>\ <cr><lf>COMPRESSION: CLASS 5<cr><lf><cr>\ <lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V.42/LAPM<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf><cr>\ <lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>COMPRESSION: CLASS 5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;---------------------------------------- ;CONNECT responses that do not use the APPEND macro ;---------------------------------------- CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> ;AT&T ARK DM 424 CONNECT_EC=<cr><lf>CONNECT <connectbps> EC<cr><lf> ;AT&T Dataports like an extra space CONNECT=<cr><lf>CONNECT <connectbps> <cr><lf> CONNECT=<cr><lf>CONNECT <connectbps> <cr><lf><cr><lf> ;Telebits CONNECT=<cr><lf>CONNECT <connectbps>/<carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAPM/<carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAPM/COMP/<carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL/COMP/<carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL/<carrierbps><cr><lf> ;;Digicom Scout CONNECT=<cr><lf>CONNECT <connectbps><hFF> CONNECT=\ <cr><lf>CONNECT<cr><lf> CONNECT=<cr><lf>PLEASE SET TO <connectbps><cr><lf> CONNECT=\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT FAST<cr><lf> ;Racal RMD CONNECT_EC=<cr><lf>CONNECT <carrierbps> MNP <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> V.42 <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> V.42 bis <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> V.42bis <connectbps><cr><lf> ;UDS Motorola CONNECT_EC=\ <cr><lf>CONNECT <connectbps>/REL<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <connectbps>/LAPM<cr><lf> ;USRobotics modems CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARQ<cr><lf> ;Codex 3261Fast returns this if *XC1 ;Codex 2264 also returns this CONNECT_EC=<cr><lf>CONNECT <connectbps> RELIABLE<cr><lf> CONNECT=<cr><lf>CONNECT <connectbps>/V32/NONE<cr><lf> ;;ATIs use this string CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M <cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M <cr><lf><cr><lf>OK<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAPM/COMP<cr><lf> ;ZyXel U-1496 CONNECT_EC=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/MNP3<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/V42b<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/V42 <cr><lf> CONNECT=<cr><lf>CONNECT <connectbps>/V32b <carrierbps>/NONE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/MNP3<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/V42b<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/V42 <cr><lf> CONNECT=<cr><lf>CONNECT <connectbps>/V.32 <carrierbps>T/NONE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/MNP3<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/V42b<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/V42 <cr><lf> CONNECT=<cr><lf>CONNECT <connectbps>/V.22b <carrierbps>/NONE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ZyXEL <carrierbps>/V42<cr><lf> ;NEC modems CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>CONNECT <connectbps>/V.42bis<cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>CONNECT <connectbps>/V.42<cr><lf> CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>CONNECT <connectbps>/REC<cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>CONNECT <connectbps>/REL<cr><lf> ;Supra CONNECT=\ <cr><lf>CARRIER <carrierbps><cr><lf>\ <cr><lf>OK<cr><lf>\ <cr><lf>OK<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;Texas Instruments Internal CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL MNP CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL V.42 CONNECT_EC=<cr><lf>CONNECT <connectbps>/V.42 ;---------------------------------------- [Angia DataStart for CompaqLTE] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=&U1 <compression_off>=&U0 <protocol_on>=\\N7 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=AT&F&C1&D2 L3 V1 W2 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL4<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL4<cr><lf> ;---------------------------------------- [ATI 2400 etc/e] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=&U1 <compression_off>=&U0 <protocol_on>=&Q6 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=AT X3 D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 X4 W1 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [ATI 9600 etc/e] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=&U1 <compression_off>=&U0 <protocol_on>=&Q6 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=AT X3 D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 W1 X4 V1 S0=0 S2=128 S7=55 <cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [AT&T 2224 CEO] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=AT X3 D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><speaker><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [AT&T Comsphere 3810] ALIAS=AT&T Comsphere 3820 ;---------------------------------------- [AT&T Comsphere 3811] ALIAS=AT&T Comsphere 3820 ;---------------------------------------- [AT&T Comsphere 3820] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1"H3 <compression_off>=%C0"H0 <protocol_on>=\\N5 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X7 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [AT&T Comsphere 3830] ALIAS=AT&T Comsphere 3820 ;---------------------------------------- [AT&T Dataport] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N5 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X7 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [AT&T Paradyne PCMCIA] ALIAS=AT&T Dataport ;---------------------------------------- [AT&T 4024] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=ATE1Q0V1X4Y0S0=0 S7=15 &D2&C1&M0 <speaker><cr> COMMAND_LISTEN=ATS0=2<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [Bocamodem M1440] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2S0=0 V1 X4 E1 S7=55 S2=128<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Cardinal 2400e] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Cardinal 9600] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&H1&I1 <hwflowcontrol_off>=&H0&I0 <compression_on>=&M6 <compression_off>=&M4 <protocol_on>=&M4 <protocol_off>=&M0&B0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Cardinal 14400] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Cardinal 14400 Internal] ;Compression turned off for stability. ;Maximum DTE speed set to 19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression protocol hwflowcontrol MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Codex 2264] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*FL3 <hwflowcontrol_off>=*FL0 <compression_on>=*SM3 <compression_off>=*SM0 <protocol_on>=*SM2 <protocol_off>=*SM0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2S0=0 V1 *XC1 E1 S7=55 S2=128<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Codex 3220] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <hwflowcontrol_off>=*FL0 <hwflowcontrol_on>=*FL3 <protocol_off>=*SM0 <protocol_on>=*SM3 <compression_off>=*DC0 <compression_on>=*DC1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 X4 *XC1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Codex 3260] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <hwflowcontrol_off>=*FL0 <hwflowcontrol_on>=*FL3 <protocol_off>=*SM0 <protocol_on>=*SM3 <compression_off>=*DC0 <compression_on>=*DC1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 *XC1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Codex 3261] ALIAS=Codex 3260 ;---------------------------------------- [Codex 3262] ALIAS=Codex 3260 ;---------------------------------------- [Codex 3263] ALIAS=Codex 3260 ;---------------------------------------- [Codex 3265] ALIAS=Codex 3260 ;---------------------------------------- [Codex 3260 Fast] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <hwflowcontrol_off>=*FL0 <hwflowcontrol_on>=*FL3 <protocol_off>=*SM0 <protocol_on>=*SM3 <compression_off>=*DC0 <compression_on>=*DC1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F S0=0 &C1 &D2 V1 X4 S2=128 *XC1 S7=55<cr> COMMAND_INIT=AT<speaker><protocol><hwflowcontrol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Codex 3261 Fast] ALIAS=Codex 3260 Fast ;---------------------------------------- [Codex 3262 Fast] ALIAS=Codex 3260 Fast ;---------------------------------------- [Codex 3263 Fast] ALIAS=Codex 3260 Fast ;---------------------------------------- [Codex 3265 Fast] ALIAS=Codex 3260 Fast ;---------------------------------------- [Codex 3220 Plus] ;ALIAS=Codex 3220 CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <hwflowcontrol_off>=*FL0 <hwflowcontrol_on>=*FL3 <protocol_off>=*SM0 <protocol_on>=*SM3 <compression_off>=*DC0 <compression_on>=*DC1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=AT X3 D COMMAND_INIT=AT&F&C1&D2 V1 X4 *XC1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Compaq SpeedPAQ 144] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <protocol_on>=\\N3 <protocol_off>=\\N0 <compression_on>=%C1 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 W2S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [CXR Telcom 1445] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*LR2*LG2 <hwflowcontrol_off>=*LR0*LG0 <protocol_on>=*M2 <protocol_off>=*M1 <compression_on>=*E1 <compression_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F1<cr> COMMAND_INIT=AT&C1&D2 *V1 *N1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><speaker><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> ;---------------------------------------- [DataRace RediModem V.32bis] ;Error control and flow control forced on for stability. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q3 <protocol_on>=\\N3 <protocol_off>=\\N3 <compression_on>=%C1 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 W1<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Datatrek 2424AMH] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><ignore> CONNECT=<cr><lf><h07>CONNECT <connectbps><ignore> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><ignore> CONNECT=<cr><lf><h07>CONNECT <connectbps><ignore> ;---------------------------------------- [Datatrek Elite 624D] ;Advanced features disabled <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker>-M0\\V0<cr> COMMAND_INIT=AT%C0<cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [Datatrek V.32] ;Supported as a client modem only <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><speaker>-M0 \\V0<cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [DP Defender1000D w/HayesUltra] ;This entry uses the Digital Pathways Defender 1000D with the ;Hayes Ultra 9600 modem. ;The macro definitions, <xxx_xx>=, and COMMAND_INIT= lines must be ;changed in order to use other modems with the Defender. ;Set Defender ports to fixed 19200 bps (not autobaud). ;Set Originate Fallback to OFF on Configure DAD Options screen. ;(If used with Telebit WorldBlazer set S51=5 to fix port speed at 19200.) DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 CALLBACK_TIME=10 <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=136 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 W1 S95=44<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATE0Q1S0=2<cr> LOOP=<h0d> LOOP=<h0d><ignore> CONNECT=<match>"DIALIN_GATEWAY" ;CONNECT=<h16><h01><h00><ignore> ;CONNECT=<h1b><h16><h01><h00><ignore> ;---------------------------------------- [Digicom Scout] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F3 <hwflowcontrol_off>=*F0 <compression_on>=*E9 <compression_off>= <protocol_on>=*E5 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT*M0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Digicom Scout Plus] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F3 <hwflowcontrol_off>=*F0 <compression_on>=*E9 <compression_off>= <protocol_on>=*E5 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT*M0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [DSI 9624LE Plus] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F3 <hwflowcontrol_off>=*F0 <compression_on>=*E9 <compression_off>= <protocol_on>=*E5 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55*M0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [DSI 9624E] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F3 <hwflowcontrol_off>=*F0 <compression_on>=*E9 <compression_off>= <protocol_on>=*E5 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT*M0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [ETech UFOMATE P1496MX] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=$F4 <hwflowcontrol_off>=$F5 <compression_on>=$C1 <compression_off>=$C0 <protocol_on>=$E3 <protocol_off>=$E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 $X1 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Evercom 24] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Evercom 24E] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=ATZ&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Evercom 24E+] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F &C1 &D2 Q0 V1 \N1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Gateway 2000 Internal Alt] ALIAS=US Robotics Sportster 14400 ;---------------------------------------- [Gateway 2000 Internal] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 W1 S95=44<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Gateway 2000 Nomad 14400] <hwflowcontrol_off>=\\Q0 <hwflowcontrol_on>=\\Q3 <protocol_off>=\\N0 <protocol_on>=\\N7 <compression_off>=%C0 <compression_on>=%C1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATX1D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 W0<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [GVC SM2400] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [GVC SM96] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1S0=0S2=128S7=55<speaker><cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT=<cr><lf><cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT=<cr><lf><cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- [GVC FM14400] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1S0=0S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- [Hayes Compatible 1200] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=1200 MAXCONNECTBPS=1200 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=ATQ0V1E1S0=0S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Compatible 2400] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Compatible 9600] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Pocket Modem 2400] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Hayes Smartmodem 2400] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Hayes Smartmodem 9600] ALIAS=Hayes Compatible 9600 ;---------------------------------------- [Hayes Optima 9600] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=136 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATX3D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 W1 S95=44<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Optima 14400] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=136 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 W1 S95=44<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Ultra 9600] ALIAS=Hayes Optima 9600 ;---------------------------------------- [Hayes Ultra 14400] ALIAS=Hayes Optima 14400 ;---------------------------------------- [Hayes V Series Smartmodem9600] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=0 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=AT X3 D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 ;Reset modem COMMAND_INIT=AT&/3<cr> OK=<ignore> COMMAND_INIT=AT&\\3<cr> OK=<ignore> COMMAND_INIT=AT&F&W<cr> COMMAND_INIT=AT&F&C1&D2 X4 V1 W1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Intel SatisFaxtion 100] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Intel SatisFaxtion 400e] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1"H3 <compression_off>=%C0"H0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=AT X3 D CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 \\V3 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [Intel 9600EX] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1"H3 <compression_off=%C0"H0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=AT&F&C1&D2V1S0=0 X4 \\V2 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-LAPM-COMP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-MNP-COMP<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-LAPM-COMP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL-MNP-COMP<cr><lf> ;---------------------------------------- [Intel 14400EX] ALIAS=Intel SatisFaxtion 400e ;---------------------------------------- [Macronix Maxlite Fax 9696] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1%M3 <compression_off>=%C0 <protocol_on>=&Q5 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Macronix VOMAX 2000] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Megahertz P2144 Pkt Faxmodem] ALIAS=Megahertz T3144 for Toshiba ;---------------------------------------- [Megahertz T3144 for Toshiba] DEVICETYPE=modem CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <protocol_on>=\\N7 <protocol_off>=\\N0 <compression_on>=%C1 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=AT&F&C1&D2 W2\\G0\\J0 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> ;---------------------------------------- [Megahertz Z3144 for Zenith] ALIAS=Megahertz T3144 for Toshiba ;---------------------------------------- [Megahertz C5144 for CompaqLTE] ALIAS=Megahertz T3144 for Toshiba ;---------------------------------------- [Megahertz XJack PCMCIA] DEVICETYPE=modem CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <protocol_on>=\\N3 <protocol_off>=\\N0 <compression_on>=%C3 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=AT&F&C1&D2 X4 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [MicroCom QX 4232bis] ;Advanced features disabled, MAXCONNECT set to 19200 CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <protocol_on>=\\N3 <protocol_off>=\\N0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C3 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 W1 V1 \\V1 \\N0 \\Q0 \\J1 %C0 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_LISTEN=ATS0=1<cr> ;CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> COMMAND_DIAL=<autodial><phonenumber><cr> ;CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> ;---------------------------------------- [MicroComQX 4232HS] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <protocol_on>=\\N3 <protocol_off>=\\N0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C3 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 \\V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> ;---------------------------------------- [MicroGate MG96] ;Error control and flow control forced on for stability. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K3 <protocol_on>=&Q5 <protocol_off>=&Q5 <compression_on>=%C1 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 w1<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [MicroGate MG144] ;Error control and flow control forced on for stability. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K3 <protocol_on>=&Q5 <protocol_off>=&Q5 <compression_on>=%C1 <compression_off>=%C0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 w1<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [MicroPorte 1042] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 \\V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL<cr><lf> ;------------------------------------------- [MultiTech MultiModem 224] ;Hardware flow control hardcoded ON for stability. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&E4 <hwflowcontrol_off>=&E4 <compression_on>=&E15 <compression_off>=&E14 <protocol_on>=&E1 <protocol_off>=&E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F E1 &C1<cr> COMMAND_INIT=AT V1 &D2 &Q1 X4 S0=0 S2=128 S7=55 $BA0<cr> COMMAND_INIT=AT<compression><protocol><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> ;------------------------------------------- [MultiTech MultiModem MT932] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&E4 <hwflowcontrol_off>=&E3 <compression_on>=&E15 <compression_off>=&E14 <protocol_on>=&E1 <protocol_off>=&E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&SF1&S0&W<cr> COMMAND_INIT=AT E1<cr> COMMAND_INIT=AT &F &C1 V1 &D2 &Q0 X4 &S0 S0=0 S2=128 S7=55 $BA0<cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> ;---------------------------------------- [NEC 9635E Plus] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 \\V3 V1 S0=0 S2=128 S7=55 <cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;--------------------------- [NEC 14.4 Data/Fax PCMCIA] ALIAS=AT&T Dataport ;---------------------------------------- [Null Modem] CALLBACK_TIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT= NoResponse COMMAND_LISTEN= CONNECT=CLIENT CONNECT=<h00>CLIENT COMMAND_LISTEN=CLIENTSERVER NoResponse COMMAND_DIAL=CLIENT CONNECT=SERVER ;---------------------------------------- [Octocom 8324] ;Hardware flow control and error correction are set ON for stability. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <protocol_off>=&E0 <protocol_on>=&E1 <compression_off>=*E0 <compression_on>=*E1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F &C3 &D2 &I2 V1 E1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M ACTIVE<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M ACTIVE<cr><lf> ;---------------------------------------- [Octocom 8396] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <protocol_off>=&E0 <protocol_on>=&E1 <compression_off>=*E0 <compression_on>=*E1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F &C3 &D2 &I2 V1 E1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M ACTIVE<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=<cr><lf>CONNECT <connectbps>/LAP-M ACTIVE<cr><lf> ;---------------------------------------- [PDI-1000] ;Supported on client side only. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 V1 E1 S0=0 S2=128 S7=55 S32=0<cr> COMMAND_INIT=AT<hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Practical Peripherals2400 Pkt] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Practical Peripherals 2400SA] ;Server:Does not hang up normally. Not supported as a server modem. ;Client side works <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3DT CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&D2 V1 S0=0 S2=128 S7=55 <speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Practical Peripherals 2400MNP] ;Advanced features are disabled. <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C2&D2 V1 S0=0 S2=128 S7=55 &Q0<cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Practical Peripherals 9600SA] <hwflowcontrol_off>=&K0 &Q0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q6 <protocol_on>=&Q5 <compression_off>=S46=136 <compression_on>=S46=138 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&D2&C1 V1 S0=0 S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<protocol><hwflowcontrol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Practical Peripherals 14400SA] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <hwflowcontrol_off>=&K0 &Q0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q6 <protocol_on>=&Q5 <compression_off>=S46=0 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=AT X3 DT COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<protocol><hwflowcontrol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Practical Peripherals 14400FX] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=0 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=AT X3 DT COMMAND_INIT=AT&F&C1&D2 V1 W1 S0=0 S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<protocol><hwflowcontrol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Racal GSM w/ Hayes Ultra] ;This entry uses the Racal GuardData Gateway Security Module with the ;Hayes Ultra 9600 modem. ;The macro definitions, <xxx_xx>=, and COMMAND_INIT= lines must be ;changed in order to use other modems with the GSM. ;Do not give callback permission to accounts used with the GSM. ;Set GSM ports to fixed 19200 bps (not autobaud). DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=&Q0 <protocol_on>=&Q5 <compression_off>=S46=136 <compression_on>=S46=2 <speaker_off>=M0 <speaker_on>=M1 COMMAND_INIT=AT&F&C1&D2 V1 X4 S0=0 S2=128 S7=55 W1 S95=44<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_LISTEN=ATE0Q1S0=1<cr> LOOP=<h0d><ignore> CONNECT=<match>"DIALIN_GATEWAY" ;LOOP=<h0d><h1b> ;LOOP=<h0d> ;CONNECT=<h16><h01><h00><ignore> ;---------------------------------------- [Racal RMD 2412] CALLBACKTIME=10 DEFAULTOFF=compression MAXCONNECTBPS=9600 MAXCARRIERBPS=2400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F2 <hwflowcontrol_off>=*F0 <compression_on>=*D0 <compression_off>=*D1 <protocol_on>=*E1 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=AT X3DT COMMAND_INIT=AT&F&C1&D2 X4 V1 S0=0 S2=128 S7=55 <cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- ;[Racal RMD 2422] ;ALIAS=Racal RMD 2412 ;---------------------------------------- [Racal RMD 2412/2] ;Toggled MAXCONNECTBPS back to 2400 CALLBACKTIME=10 DEFAULTOFF=compression MAXCONNECTBPS=2400 MAXCARRIERBPS=2400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F2 <hwflowcontrol_off>=*F0 <compression_on>=*D0 <compression_off>=*D1 <protocol_on>=*E1 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 X4 V1 S0=0 S2=128 S7=55 <cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [Racal RMD 3221] ;Set MAXCONNECTBPS to disable unsupported baud rate of 12000 bps. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=*F2 <hwflowcontrol_off>=*F0 <compression_on>=*D1 <compression_off>=*D0 <protocol_on>=*E1 <protocol_off>=*E0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Racal RMD 3222] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q1 <hwflowcontrol_off>=\\Q0 <compression_on>=\\M0 <compression_off>=\\M1\\C4 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42bis <connectbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>BUFFER <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42 <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42bis <connectbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>BUFFER <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42 <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [Racal RMD 3226] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=14400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K3 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42bis <connectbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>BUFFER <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42 <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42bis <connectbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>BUFFER <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>V42 <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [Racal RMD 3223] ALIAS=Racal RMD 3222 ;---------------------------------------- [Racal RMD 9632PA] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q1 <hwflowcontrol_off>=\\Q0 <compression_on>=\\C5 <compression_off>=\\C4 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [Racal RMD 9642PA] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q1 <hwflowcontrol_off>=\\Q0 <compression_on>=\\C5 <compression_off>=\\C4 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATX3D COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> ;Following line disables error correction, compression. To enable, delete ;the following line and use rasphone interface. COMMAND_INIT=AT \\N0 <cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps><cr><lf><append>\ <cr><lf>MNP <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ;---------------------------------------- [SD ACM400 w/ AT&T 3820] ;This entry uses the Security Dynamics ACM/400 with the ;AT&T Comsphere 3820 modem. ;The macro definitions, <xxx_xx>=, and COMMAND_INIT= lines must be ;changed in order to use other modems with the ACM/400. ;Set ACM/400 ports to fixed 19200 bps (not autobaud). ;Do not use Destination IDs with ACM/400 accounts. DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1"H3 <compression_off>=%C0"H0 <protocol_on>=\\N5 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 X7 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATE0Q1S0=1<cr> CONNECT=<match>"DIALIN_GATEWAY" ;CONNECT=<h16><h01><h00><ignore> ;CONNECT=<h1b><h16><h01><h00><ignore> ;---------------------------------------- [SupraModem 2400] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Supra Fax Modem 9624 Internal] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Supra Fax Modem V32] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F2&C1&D2 V1 W1 Q0 S7=55 <cr> COMMAND_INIT=AT S2=128 S11=55 S95=44 S0=0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Supra Fax Modem V32bis] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F2&C1&D2 S7=55 <cr> COMMAND_INIT=ATS2=128 S11=55 S95=44 S0=0<speaker><cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Supra Fax Modem Plus] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 W1 Q0 <cr> COMMAND_INIT=ATS7=55 S2=128 S11=55 S95=44 S0=0<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit QBlazer] ;Not tested as a server modem. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 <hwflowcontrol_off>=S58=0 <compression_on>=S190=1 <compression_off>=S190=0 <protocol_on>=S180=2 <protocol_off>=S180=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F &C1 &D2 S0=0 S2=128 S7=55 S59=11 X4<cr> COMMAND_INIT=AT <hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T1000] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT~&F S53=1 S52=1 S58=0 S0=0 S55=3 S54=3 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T1500] ;Server:untested ;This modem has not been tested as a server modem. This modem is not ;supported as a server modem. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_on>=S97=1 S106=1 S98=0 <compression_off>=S98=0 <protocol_on>=S95=2 S96=1 <protocol_off>=S96=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT~&F X13 S131=1 S52=1 S55=3<cr> COMMAND_INIT=ATS110=0 S0=0 S55=3 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T1600] ;Advanced features are disabled CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 <hwflowcontrol_off>=S58=0 <compression_on>=S190=1 <compression_off>=S190=0 <protocol_on>=S180=2 <protocol_off>=S180=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F &C1 &D2 S0=0 S2=128 S7=55 S59=11 X11 S58=0 S180=0 S181=0<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T2000] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT &F S52=1 S2=255 S0=0 S54=3 S7=55 S58=0 S180=0 S181=0<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T2500] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_on>=S96=1 S98=3 <compression_off>=S96=0 S98=0 <protocol_on>=S66=2 S95=2 S97=1 S106=1 <protocol_off>=S66=0 S95=0 S97=0 S106=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT~&F <cr> COMMAND_INIT=ATX14 S131=1 S52=1 S55=3 S55=3 S7=55 S50=6 S92=1<cr> COMMAND_INIT=AT<compression><protocol><hwflowcontrol><speaker> S50=6 <cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit T3000] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_on>=S190=1 S180=2 <compression_off>=S190=0 <protocol_on>=S180=2 <protocol_off>=S180=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 X11 S0=0 S2=128 S7=55 S50=7 S59=9<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit TrailBlazer Plus] ;PEP disabled with S50=3 S92=1. To re-enable PEP for 9600 baud ;connection with another Telebit, delete the string S50=3 S92=1. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_off>=S98=0 S110=0 <compression_on>=S98=3 <protocol_on>=S97=1 S106=1 S95=2 <protocol_off>=S97=0 S106=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT~&F S52=4 S131=3<cr> COMMAND_INIT=ATS51=255 S2=255 S0=0 S7=55 X3<cr> COMMAND_INIT=AT<hwflowcontrol><compression><speaker>S50=3 S92=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit WorldBlazer] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_on>=S180=2 S190=1 <compression_off>=S190=0 <protocol_on>=S180=2 S190=0 <protocol_off>=S180=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 X11 S0=0 S2=128 S94=1 S92=1 S50=7<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Telebit WorldBlazer-Rackmount] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=S58=2 S68=255 <hwflowcontrol_off>=S58=0 S68=255 <compression_on>=S180=2 S190=1 <compression_off>=S190=0 <protocol_on>=S180=2 S190=0 <protocol_off>=S180=0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 X11 S0=0 S2=128 S94=1 S92=1 S50=7<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker>Q0<cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [UDS Motorola V.3225] ;Advanced features disabled. CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 %C0 \N1<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [UDS Motorola V.3227] ;Server: CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 ;MAXCONNECTBPS set to 9600 for reasons of stability. MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N7 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 \\V1 S0=0 S2=128 S7=30<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [UDS Motorola V.3229] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N7 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 \\V1 S0=0 S2=128 S50=7 <cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [UDS Motorola FasTalk V.32/42b] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ;Maxconnect set down to 9600 and advanced features disabled for stability. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 \\V1 \\Q0 %C0 \\N0 S0=0 S2=128<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/LAPM<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/LAPM<cr><lf> ;---------------------------------------- [US Robotics Courier Dual] ALIAS=US Robotics Courier V.32bis ;---------------------------------------- [US Robotics Courier HST] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 &B0 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [US Robotics Courier V.32bis] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&R2&H1 <hwflowcontrol_off>=&R1&H0 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1 &D2 &A1 &B1 V1 Q0 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> ;---------------------------------------- [US Robotics Sportster 2400] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [US Robotics Sportster 9600] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&H1&R2 <hwflowcontrol_off>=&H0&R1 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [US Robotics Sportster 14400] CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&H1&R2 <hwflowcontrol_off>=&H0&R1 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker>&B1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> ;---------------------------------------- [Ven-Tel 9600 Plus II] ;Compression forced ON. <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATX3DT CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT \\Q3 \\N3 %C1 <cr> COMMAND_INIT=AT<speaker> <cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT=\ <cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS MNP5<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT=\ <cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT=\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESSION NOT AVAILABLE<cr><lf>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS V.42bis<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS<cr><lf> CONNECT_EC=\ <cr><lf>COMPRESS MNP5<cr><lf><append>\ <cr><lf>CONNECT <carrierbps> TRELLIS/LAPM<cr><lf> ;---------------------------------------- [Ven-Tel Pocket 24 V.42bis FAX] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=&Q5 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=55 S95=44<cr> ;COMMAND_INIT=AT<speaker><hwflowcontrol><cr> COMMAND_INIT=AT<speaker><hwflowcontrol><protocol><compression><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Ven-Tel 14400 Fax] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=&Q5 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 W0 S0=0 S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Ven-Tel 14400 Fax Internal] ALIAS=Ven-Tel 14400 Fax ;---------------------------------------- [Western Datacom Worldcom] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N7 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 W1 X4 S0=0 S2=128 S7=55<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP REL<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP REL<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> ;Not supported as a server modem. COMMAND_LISTEN=ATS0=1<cr> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP REL<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: MNP REL<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: V42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf><cr><lf> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> ;---------------------------------------- [Zoom AFX] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Zoom FX 9624V] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=55 S95=44<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Zoom VFX V.32bis] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=&Q5 <protocol_off>=&Q0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=55 S95=44 <cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [ZyXel U-1496] ;Cannot toggle EC and DC entirely independently in ZyXel. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&H3 <hwflowcontrol_off>=&H0 <compression_on>=&K4 <compression_off>=&K0 <protocol_on>=&K3 <protocol_off>=&K0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=10 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=ATV1 X2 S0=0S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><protocol><compression><cr> COMMAND_LISTEN=ATS0=1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> ;---------------------------------------- [ZyXel U-1496E] ALIAS=ZyXel U-1496 ;---------------------------------------- ; UK MODEMS ;---------------------------------------- ;---------------------------------------- [Hayes Ultra 14400 - UK] ALIAS=Hayes Optima 14400 ;---------------------------------------- [Smartlink Pocket 2400 - UK] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [Smartlink V32Bis/Fax - UK] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F. COMMAND_INIT=AT&C1&D2 \\V1 X1 W2 Q0 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/REL<cr><lf> ;---------------------------------------- [Dataflex Rapier+ V32Bis - UK] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1\\J1S0=0S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> ;---------------------------------------- [Psion Dacom PDM 50F - UK] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1S0=0S2=128 S7=55<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> ;---------------------------------------- ;Please note that this modem does NOT support 14,400bps DTE speed. [Andest Rocket - UK] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=$F4 <hwflowcontrol_off>=$F5 <compression_on>=$C1 <compression_off>=$C0 <protocol_on>=$E3 <protocol_off>=$E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 $X2 V1 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT /MNP 5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM /V.42bis<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT /MNP 5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM /V.42bis<cr><lf> ;---------------------------------------- [Intel SatisFaxtion - UK] ALIAS=Hayes Compatible 2400 ;--------------------------------------------------------------------------- ; This modem does not support callback when connecting to MS RAS 1.x Servers ;--------------------------------------------------------------------------- [USR Worldport 14400 - UK] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&R2&H1 <hwflowcontrol_off>=&R1&H0 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1 &D2 &A3 &B1 V1 Q0 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> ;---------------------------------------- ; SWEDISH MODEMS ;---------------------------------------- ;---------------------------------------- [GVC SM2400 - SWE] ALIAS=Hayes Compatible 2400 ;---------------------------------------- [GVC SM96 - SWE] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1S0=0S2=128S7=60<speaker><cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT=<cr><lf><cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> CONNECT=<cr><lf><cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf><cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- [GVC FM14400 - SWE] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2Q0V1E1S0=0S2=128 S7=60 S95=44<cr> COMMAND_INIT=AT<speaker><compression><hwflowcontrol><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP/COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- [Hidem 14400/FAX - SWE] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N6 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 \\V1 V1 W2S0=0 S2=128 S7=60 <cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- ;Hardware flow control and error correction are set ON for stability. ;For stability keep DTE at 9600bps. [Hidem 2442P/FAX - SWE] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q3 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N7 <protocol_off>=\\N7 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 \\V1 V1 X4S0=0 S2=128 S7=60 <cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> ERROR_NO_CARRIER=<cr><lf><cr><lf>NO CARRIER<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=1<cr> ERROR_NO_CARRIER=<cr><lf><cr><lf>NO CARRIER<cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP4<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/MNP5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/V42BIS<cr><lf> ;---------------------------------------- [LASAT CLM24 Plus] <speaker_on>=L2M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=speaker compression ;MAXCARRIERBPS=2400 ; New value because this speed is used when dialback is established MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2\\J0\\V1<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [LASAT 144-Series] <speaker_on>=L2M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=speaker compression ;MAXCARRIERBPS=14400 ; New value because this speed is used when dialback is established MAXCARRIERBPS=57600 MAXCONNECTBPS=57600 COMMAND_INIT=AT&F&C1&D2W1<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [LASAT 288-Series] <speaker_on>=L2M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=speaker compression ;MAXCARRIERBPS=28800 ; New value because this speed is used when dialback is established MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2W1<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [LASAT 336-Series] <speaker_on>=L2M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C3 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=speaker compression ;MAXCARRIERBPS=33600 ; New value because this speed is used when dialback is established MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2W1<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [LASAT unique 640i - X75] ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; There is no V42 negotiation like the modem features on ISDN : This option can be used to switch between B-channel protocols. ; \N3 = X75, \N1 = HDLC, \N0 = V110, \N2 = X25. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N3 <protocol_off>=\\N3 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> [LASAT unique 640i - V120] ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; There is no V42 negotiation like the modem features on ISDN : This option can be used to switch between B-channel protocols. ; \N3 = X75, \N1 = HDLC, \N0 = V110, \N2 = X25. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N7 <protocol_off>=\\N7 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 640i - HDLC] ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; There is no V42 negotiation like the modem features on ISDN : This option can be used to switch between B-channel protocols. ; \N3 = X75, \N1 = HDLC, \N0 = V110, \N2 = X25. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N1 <protocol_off>=\\N1 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 640i - X25] ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; There is no V42 negotiation like the modem features on ISDN : This option can be used to switch between B-channel protocols. ; \N3 = X75, \N1 = HDLC, \N0 = V110, \N2 = X25. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N2 <protocol_off>=\\N2 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 640i - V110/38400] ; The below definitions support using the V110 ; Protocol. In this mode the adapter will adjust ; the DTE-speed to the CONNECT speed. (Max 38400Bps) ; ****************************************************************** ; *** These settings is only for V.110 protocol *** ; *** and DTE-speed at 38400 Bps *** ; *** To use these settings firmware V2.12 or later is required. *** ; ****************************************************************** ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N0 <protocol_off>=\\N0 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=38400 MAXCONNECTBPS=38400 COMMAND_INIT=AT&F%R7&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 640i - V110/19200] ; The below definitions support using the V110 ; Protocol. In this mode the adapter will adjust ; the DTE-speed to the CONNECT speed. (Max 38400Bps) ; ****************************************************************** ; *** These settings is only for V.110 protocol *** ; *** and DTE-speed at 19200 Bps *** ; *** To use these settings firmware V2.12 or later is required. *** ; ****************************************************************** ; There is no datacompression on the LASAT 640i ; Instead this is used to control the LLC element. ; But only as long as protocol is ON. ; %C0 = LLC disabled, %C1 = LLC enabled. ; The LASAT unique 640i always require HW handshake. ; The hardware handshake can however be configured ; in various ways. Refer to the manual for more details. ; S9 is used to delay the connect message in 0,1 seconds. This can be ; nessary because of the fast connect given on ISDN connections. <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K2 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\N0 <protocol_off>=\\N0 <autodial_on>=ATD <autodial_off>=ATD ;---------------------------------------- [LASAT unique 1280mi] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P3 <protocol_off>=\\P3 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - X75] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P3 <protocol_off>=\\P3 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - V120] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P7 <protocol_off>=\\P7 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - HDLC] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P1 <protocol_off>=\\P1 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - V110] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P0 <protocol_off>=\\P0 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> [LIGHTFAX 1440LC - SWE] CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F%R6&C1&D2<cr> COMMAND_INIT=AT V1 X4 S0=0 S7=60 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - X75 MLP] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P3 <protocol_off>=\\P3 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2%B3<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;---------------------------------------- [LASAT unique 1280mi - V120 MLP] <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C0 <compression_off>=%C1 <protocol_on>=\\P7 <protocol_off>=\\P7 <autodial_on>=ATD <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=115200 MAXCONNECTBPS=115200 COMMAND_INIT=AT&F&C1&D2%B3<cr> COMMAND_INIT=AT V1 X4 S0=0 S9=20<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.75<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>X.25<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>V110<cr><lf> LOOP=\ <cr><lf>RING<cr><lf><append>\ <cr><lf>HDLC<cr><lf> ;--------------------------------------------------------------------------- ; This modem does not support callback when connecting to MS RAS 1.x Servers ;--------------------------------------------------------------------------- [LIGHTFAX 1440LC - SWE] CALLBACKTIME=15 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=14400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 E1 V1 W1 X4 S0=0 S7=60 S2=128<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;------------------------------------------- [MultiTech MT932 - SWE] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&E4 <hwflowcontrol_off>=&E3 <compression_on>=&E15 <compression_off>=&E14 <protocol_on>=&E1 <protocol_off>=&E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&SF1&S0&W<cr> COMMAND_INIT=AT E1<cr> COMMAND_INIT=AT &F &C1 V1 &D2 &Q0 X4 &S0 S0=0 S2=128 S7=60 $BA0<cr> COMMAND_INIT=AT<compression><hwflowcontrol><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> RELIABLE COMPRESSED<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps> LAPM COMPRESSED<cr><lf> ;------------------------------------------------------------------------ ; Hardware flow control and error correction are set ON for stability. ; ; Connecting to modems with Advanced features may fail due to Guard tone ; feature. ;------------------------------------------------------------------------ [UCOM FASTLINK 144 - SWE] <speaker_on>=L2M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K3 <compression_on>=%C2 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N3 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=speaker compression MAXCARRIERBPS=14400 MAXCONNECTBPS=14400 COMMAND_INIT=AT&F&C1&D2N0&G0W1<cr> COMMAND_INIT=AT V1 X4 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<speaker><hwflowcontrol><compression><protocol><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [UCOM TRAVELLER 144 - SWE] alias=UCOM FASTLINK 144 - SWE ;---------------------------------------- [UDS Motorola FasTalk V32- SWE] CALLBACKTIME=20 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 ;Maxconnect set down to 9600 and advanced features disabled for stability. <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F<cr> COMMAND_INIT=AT&C1&D2 \\V1 \\Q0 %C0 \\N0 S0=0 S2=128<cr> COMMAND_INIT=AT<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/LAPM<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/REL<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/LAPM<cr><lf> ;--------------------------------------------------------------------------- ; Please note that this modem does NOT support 14,400bps DTE speed. ;--------------------------------------------------------------------------- ; This modem does not support callback when connecting to MS RAS 1.x Servers ;--------------------------------------------------------------------------- [UFOMATE P1496MX - SWE] <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=$F4 <hwflowcontrol_off>=$F5 <compression_on>=$C1 <compression_off>=$C0 <protocol_on>=$E3 <protocol_off>=$E0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 $X2 V1 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT /MNP 5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM /V.42bis<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> ALT /MNP 5<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps> LAPM /V.42bis<cr><lf> ;---------------------------------------- [USR Courier V.32bis - SWE] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&R2&H1 <hwflowcontrol_off>=&R1&H0 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1 &D2 &A1 &B1 V1 Q0 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> ;---------------------------------------- ;Please note that this modem does NOT support 14,400bps DTE speed. [USR Sportster 14400 - SWE] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&H1&R2 <hwflowcontrol_off>=&H0&R1 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 &A3V1 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker>&B1<cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> ;---------------------------------------- [USR Worldport 14400 - SWE] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=19200 MAXCONNECTBPS=19200 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&R2&H1 <hwflowcontrol_off>=&R1&H0 <compression_on>=&K1 <compression_off>=&K0 <protocol_on>=&M4 <protocol_off>=&M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1 &D2 &A3 &B1 V1 Q0 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><compression><protocol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=\ <cr><lf>CONNECT <carrierbps><cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/V32/NONE<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/LAPM/V42BIS<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/MNP/MNP5<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP<cr><lf> CONNECT_EC=\ <cr><lf>CONNECT <carrierbps>/ARQ/V32/MNP/MNP5<cr><lf> ;---------------------------------------- [DYNALINK - SWE] CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=14400 MAXCONNECTBPS=38400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=&K3 <hwflowcontrol_off>=&K0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F&C1&D2 L3 V1 W1 S0=0 S2=43 S7=55 S95=5<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> [SBN 2314C - SWE] CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=14400 MAXCONNECTBPS=14400 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT &F &D2 +Q3 V1 S0=1 S2=128 S7=60 <cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> [SEMAFOR 2324C - SWE] CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=2400 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT &F &D2 +Q2 V1 S0=1 S2=128 S7=60 +C1<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> [SEMAFOR 1496A - SWE] CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 <speaker_on>=M1 <speaker_off>=M0 <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 <compression_on>=%C1 <compression_off>=%C0 <protocol_on>=\\N3 <protocol_off>=\\N0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT &F &D2 +Q3 V1 S0=1 S2=128 S7=60 <cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> COMMAND_LISTEN=ATS0=1<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps><cr><lf> CONNECT=<cr><lf>CONNECT <carrierbps>/<connectbps>/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> V.42BIS/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps>/ V.42BIS/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps> LAPM/TCM<cr><lf> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf><h11> CONNECT_EC=<cr><lf>CONNECT <carrierbps>/REL/<connectbps><cr><lf> ;---------------------------------------- ;---------------------------------------- ; AUSTRALIAN MODEMS ;---------------------------------------- ;---------------------------------------- [Avtek CD900 - AUS] CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD COMMAND_INIT=AT&F+C61B0X1&C1&D2 S0=0 S7=60<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;-------------------------------------- ; This modem does not support callback ;-------------------------------------- [Avtek CD930 - AUS] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C3 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATX1D CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F&C1&D2 X1 W2 S0=0 S2=128 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> LOOP=<cr><lf>RINGING<cr><lf> COMMAND_LISTEN=ATS0=2<cr> LOOP=<cr><lf>RINGING<cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>COMPRESSION: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps>/ARQ<cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M/HDX<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> ;-------------------------------------- ; This modem does not support callback ;-------------------------------------- [Banksia XM124/R FAXMODEM- AUS] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 S0=0 V1 X1 S2=128 S7=60<speaker><cr> COMMAND_LISTEN=ATS0=2<cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;---------------------------------------- [Banksia MX-6 V.32bis - AUS] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C3 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 X1 V1 N1 S0=0 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><h5C>/ARQ<cr><lf>\ CONNECT_EC=<cr><lf>CONNECT <connectbps><h5C>/ARQ<cr><lf>\ COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><h5C>/ARQ<cr><lf>\ CONNECT_EC=<cr><lf>CONNECT <connectbps><h5C>/ARQ<cr><lf>\ ; V.42BIS Compression with Protocol ALT,MNP5,LAP-M,MNP4,MNP3,MNP2,NONE CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: MNP2<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: MNP3<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: V.42BIS<cr><lf>\ <cr><lf>PROTOCOL: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: VVV.42BIS<cr><lf>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps>/ARQ<cr><lf> ; End of compression for V.42bis ; CLASS5 Compression with Protocol ALT,MNP5,LAP-M,MNP4,MNP3,MNP2,NONE CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: MNP2<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: MNP3<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: CLASS5<cr><lf>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps>/ARQ<cr><lf> ; End of compression for CLASS5 Compression. ; NONE Compression with Protocol ALT,MNP5,LAP-M,MNP4,MNP3,MNP2,NONE CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: NONE<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: MNP2<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: MNP3<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: MNP4<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: LAP-M<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: MNP5<cr><lf>\ <cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=\ <cr><lf>CARRIER <carrierbps><cr><lf><append>\ <cr><lf>COMPRESSION: NONE<cr><lf>\ <cr><lf>PROTOCOL: ALT<cr><lf>\ <cr><lf>CONNECT <connectbps>/ARQ<cr><lf> ; End of compression for NONE Compression. ;---------------------------------------- [Maestro RC224FMI - AUS] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 X1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;---------------------------------------- [Maestro 144FMEI - AUS] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C1 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 X1 S0=0 S2=128 S7=60 <speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;------------------------------------------------------ [Netcomm Pocket Rocket PA- AUS] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C3 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=9600 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 X1 W1 S95=2 S0=0 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;---------------------------------------- [Netcomm Smartmodem E7F - AUS] <hwflowcontrol_off>=&K0 <hwflowcontrol_on>=&K3 <protocol_off>=\\N0 <protocol_on>=\\N3 <compression_off>=%C0 <compression_on>=%C3 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATX1D CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F. COMMAND_INIT=AT&C1&D2 X1 \\V1 Q0 S0=0 S7=60<cr> COMMAND_INIT=AT<hwflowcontrol><protocol><compression><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;--------------------------------------------- [Netcomm Pocket M/F 2400-AUS] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF=compression MAXCARRIERBPS=2400 MAXCONNECTBPS=2400 COMMAND_INIT=AT&F&C1&D2 V1 X1 S0=0 S2=128 S7=55<speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> COMMAND_LISTEN=ATS0=2<cr> CONNECT=<cr><lf>CONNECT <connectbps><cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/MNP<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/V42BIS<cr><lf> CONNECT_EC=<cr><lf>CONNECT <connectbps>/ARP<cr><lf> ;---------------------------------------- ; German Modems ;---------------------------------------- [Dr Neuhaus Fury 2403 TI - GER] <speaker_on>=M1 <speaker_off>=M0 <autodial_on>=ATDT <autodial_off>=ATD <compression_on>=&Q5 <compression_off>=&Q0 <protocol_on>= <protocol_off>= <hwflowcontrol_on>=\\Q3 <hwflowcontrol_off>=\\Q0 CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=9600 MAXCONNECTBPS=9600 COMMAND_INIT=AT&F0&C1&D2 V1 S0=0 S2=128 S7=55 W1<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Elsa MicroLink 14400 Int- GER] <hwflowcontrol_off>=\\Q0 <hwflowcontrol_on>=\\Q0 <protocol_off>=\\N0 <protocol_on>=\\N0 <compression_off>=%C0 <compression_on>=%C0 <speaker_off>=M0 <speaker_on>=M1 <autodial_on>=ATDT <autodial_off>=ATD CALLBACKTIME=30 DEFAULTOFF= MAXCARRIERBPS=14400 MAXCONNECTBPS=19200 COMMAND_INIT=AT&F&C1&D2 V1 S0=0 S2=128 S7=55 W1 S95=8<cr> COMMAND_INIT=AT<protocol><compression><hwflowcontrol><speaker><cr> COMMAND_DIAL=<autodial><phonenumber><cr> COMMAND_LISTEN=ATS0=1<cr> ;---------------------------------------- [Hayes Optima 9600 - GER] ALIAS=Hayes Optima 9600 ;---------------------------------------- [Hayes Optima 14400 - GER] ALIAS=Hayes Optima 14400 ;---------------------------------------- [Hayes Ultra 9600 - GER] ALIAS=Hayes Optima 9600 ;---------------------------------------- [Hayes Ultra 14400 - GER] ALIAS=Hayes Optima 14400Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.