Driver Name: ibmexpkt.com
Description: Packet driver for Ethernet PC Card.
Revision Number 2.51
Files In the Directory:
ibmexpkt.com - packet driver
readme.txt - this file
ibmexpkt.zip - zipped source files
Operating System Supported:
MS-DOS
Windows 3.1
Installation Requirements:
You will need to select a packet software interrupt number
that is unused by the system. The most often selected is
0x60 (hex).
Installation Proceedure:
Run ibmexpkt without arguments and you will get the
following usage statement:
ibmexpkt [options] <packet_int_no> <io_addr> <Ethernet Address>
-a -- Force driver to autonegotiate for full/half duplex operation.
-h -- Force driver to operate in half duplex mode (the default).
-f -- Force driver to operate in full duplex mode.
-i -- Force driver to report itself as IEEE 802.3 instead of Ethernet II.
-d -- Delayed initialization. Used for diskless booting
-n -- NetWare conversion. Converts 802.3 packets into 8137 packets
-w -- Windows hack, obsoleted by winpkt
-p -- Promiscuous mode disable
-u -- Uninstall
The only requirement is to select an unused packet_int_number.
The most frequently used is 0x60 (hex).
Other Information:
1. The card must be enabled by POINTJET.EXE or CS20JET.EXE before
starting ibmexpkt.com
2. Only IO Mode is supported.
3. If you are using multiple cards you must specify the I/O address
of each card when started.
4. The cable must be attached to the PC card for the card to be
detected, and the cable must be attached to a working network
before the driver will initialize.
Last Released Version: 2.51
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.