56K PCI LT WIN MODEM
Multi-Country Version 5.20a
What is the different with Original Lucent 5.20 Firmware?
a) Added COM Port changing capability in the System Device Driver Properties.
b) Added Easy Uninstallation from the Control Panel > Add Remove Program.
c) Added Multi-Country Selection from Control Panel "Modem Country Select".
Installation Guide
------------------
a. Install the PCI modem card into a Free PCI slot.
b. Bootup the System and go MS Windows95.
c. MS Windows95 will detect the card and prompt for the drivers.
d. Insert the driver disk into a: drive.
e. Direct the installation process to floppy disk.
f. During the process, the installation will prompt for "Wave device for modem".
g. Again select the floppy disk as the source and contiunue with the installation.
h. Upon completion, go to Control Panel and double click on the modem icon.
i. Go to the Diagnostic Tab and select the modem.
j. Click on the More Info button to test the modem.
k. If the test shows a list of ATI commands, then the installation is successful.
l. Next select the modem to the correct country type.
Using Country Select Applet ( for Win95 )
i) go to Control Panel
ii) click on 'Modem Country Select' applet
iii)select the type of country required in the pull down menu and click 'OK'
o. Then complete the installation by restarting MS Windows95.
Under Windows NT 4.0:
---------------------
1. Create the COM3 or COM4 port.
a) Before creating the port, check the available of free IRQ of your computer.
b) Goto Start->Program->Administration->Windows NT Diganostic
c) Com3 - 3E8~3EF
d) Com4 - 2E8~2EF
2. Add the modem to use the COM port created.
a) Control Panel->Add New Hardware->Modem->HaveDisk
b) Specify the location of the Modem Driver and LT Win Modem will be shown.
c) Continue and specify the modem to use the Com Port that you have created.
Thank You for your support of this product!
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.