The Windows 95 will not recognize the PCI IDE port, PCI host bridge, and PCI to ISA bridge on the new 430HX chipset. So after installing Windows 95, you should copy the two patch files, machine.inf and mshdc.inf, to the \windows\inf directory. Then boot to Windows 95 and go to the device manager and delete the hard disk controller previously installed by Windows 95. Go down to "system devices" in the Device Manager and delete "PCI standard bridge" and "PCI standard host CPU bridge." Reboot the system. Windows 95 will find a new PCI IDE controller, a new Intel Processor to PCI bridge(Triton 2), and a new Intel Triton 2 to ISA bridge. If you re-run the setup of Windows 95 again, then you need to repeat the procedures again.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.