README.TXT for the EVM568xx-Win (MS-Windows) Revision history: 3.26 10/26/99 Fix BCS disassembly for 56800 3.25 10/21/99 update release 3.22 06/24/99 Fix XASM "ASR Y0" for 56800 3.19 05/06/99 Fix processing after EX change (OMR) 3.18 05/04/99 Fix XASM "ADD Y0,X0" & TSTW X:(ea) for 56800 3.17 04/23/99 Fix XASM "ADD reg,mem" for 56800 3.16 04/15/99 Terminate INPUT if EOF reached 3.14 01/26/99 Release (fix for LMEM on 56000/56300) 3.11 10/22/98 Release for CD 3.09 09/25/98 Clear OMR's EX bit for peripheral register accesses 3.08 09/24/98 Fix OMR EX bit handling 3.07 08/31/98 Fix I/O register name string table - DSP568xx 3.00 08/12/98 Restore core registers registers before reset Add horizontal scroll to Load Modules dialog Close COM port if init fails 2.60 07/21/98 Fix Watch display and editing (Trap D) 2.59 07/14/98 Fix reading of the PC value (corrupted pointer) 2.58 07/10/98 Add memory space cast for WATCH (Ex.: (X:)(*(&varName+2))) 2.57 07/06/98 Fix TrapD during application reload 2.52 05/06/98 Add memory COMPARE command 2.48 04/16/98 Fix INPUT command processing 2.47 04/13/98 Support for DSP56824EVM 2.36 12/15/97 Do not display data when window is minimized 2.33 11/17/97 Change color saving procedure, add GOCURS command (for alias) 2.31 10/17/97 Do not disable interrupts during single step Fix "INPUT" with decimal radix 2.30 10/14/97 Allow to clear bit 200 in SR during single-step Remove TPRx registers from I/O window (read only) 2.28 10/05/97 Fix SR handling, allow OnCE regs in evaluator Fix disassembly of ROR and BRCLR 2.27 09/30/97 Fix COP DIS bit handling (OnCE Control Register) 2.20 07/30/97 Fix bugs in disassembly ($7c21 etc) "CHANGE PCDD value" was masking out bi $0004 Update OnCE window after change of OCR 2.18 05/05/97 Implement workarounds for 56811 debug problems. Default screen setup is monochrome 2.17 04/29/97 Fix Tab Size setting procedure (restore on startup) 2.16 04/25/97 Fix graphics data display routine. Add graphics mode cursor (Toggled with the Insert key within data window) 2.15 04/22/97 Change scrolling proc of the DATA window in the graphics mode. 2.14 04/18/97 Modify Color Setup. Default MONO (-m) has black text on white. Add querry before saving setup on exit (enable with -x option) 2.10 04/03/97 Fix disassembly of "INC X0" etc. 2.09 04/01/97 Fix disassembly of "MOVE src,ND" and "OR B1,X0" 2.08 03/20/97 Recognize DSP state during system initialization 2.07 03/19/97 Fix system initialization on Win95 machines 2.06 03/05/97 Fix SW crash while reading corrupted .cld file 2.05 03/05/97 Modify LINK-56K firmware load procedure 2.01 02/17/97 Add ENABLE_ONCE before DEBUG_REQUEST after DSP reset 1.97 01/08/97 Fix PC value display after breakpoint at and of the DO loop Update LC value for breakpoints around end of the DO loop 1.96 01/07/97 Fix memory_read for the new firmware. 1.94 12/19/96 Do not display ERROR message if DBGINIT.CMD not found Support for firmware 1.04, BFCLR disassembly fixes 1.93 12/16/96 Add UNTIL command - "GO address" replaces PC value 1.88 12/10/96 Fix source mode display for single line sections 1.86 12/02/96 IO regs mapping, Disassembly bugs, JUMP over subroutines 1.85 11/22/96 Fix "FORCE B" during TRACE, limit STEP count to 256 1.84 11/20/96 Correct "JUMP count" operation & stopping, Fixes in 811 xasm 1.82 11/09/96 Fix Breakpoint references by # 1.81 11/07/96 Change of HW break types 1.80 10/30/96 Fix peripheral register parsing, WATCH for M01 and N WATCH remove procedure 1.79 10/28/96 Fixes in WATCH command, enable INPUT/OUTPUT 1.77 10/23/96 Fix "SYMBOL label", Macro cmd processing 1.76 10/21/96 Fix JUMP command, detect controller reset 1.75 10/15/96 Initial release ********************************************************************** *** *** *** We would appreciate your suggestions, and please notify us of *** *** any problems. Thank You. *** *** *** *** *** *** Domain Technologies, Inc. Tel.: (972) 578-1121 *** *** 1700 Alma Dr., #245 Fax: (972) 578-1086 *** *** Plano, Texas 75075 *** *** *** *** E-mail: support@domaintec.com *** *** WWW: http://www.domaintec.com *** *** FTP: ftp://ftp.domaintec.com/domtech *** *** *** **********************************************************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.