Firmware Uploading FLASH MEMORY-MAPPING UPGRADE VERSION CAUTION! — If upgrading from firmware versions prior to 3.07, you must first load 3.07 (included here), then after that the version you really need. This is because the versions 3.07 and up allows for firmware files larger than the older firmware versions. When loading a too-large firmware file the on a printer with 3.06 or earlier, the printer will lose it's ability to communicate and must be sent in for service. WARNING! – If this happens the printer will be in an undefined state where components like motors etc. may be powered and eventually fail so it is crucial to switch OFF the power immediately. To upload firmware, install the printer as normal on your Windows system. Execute the swcloader.exe application. Select the TTP20x0 printer from the drop-down box. Click the Select File button and find the correct firmware for your printer. See the list below. 1814 TTP 2020 & TTP 2030 (Parallel & USB Printers) 1818 TTP 2010 (Serial Printer) Click the Load as FW button. You will see the status light on the printer flash rapidly for a while. DO NOT INTERRUPT POWER DURING THIS PROCEDURE! When the firmware upload has completed, the printer will "click". Print a self-test page from the printer to verify that the firmware upload was successful (see Technical Manual for more information.) If you have any questions or problems, please contact Swecoin Technical Support: - North and South American customers: techsupport@swecoinus.com; +1 (401) 848 2000 - All other locations: tech.support@swecoin.se; +46 (8) 623 4560Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.