README.TXT for the EVM56K-Win (MS-Windows 3.1) Revision history: 3.26 12/11/99 update release 3.25 10/21/99 update release 3.20 05/17/99 Fix attribute processing in IEEE-695 3.16 04/15/99 Terminate INPUT if EOF reached 3.14 01/26/99 Fix LMEM load for IEEE-695 files 3.11 10/22/98 Release for CD 3.07 09/21/98 Do not reset EVM on startup 3.00 08/12/98 Restore core registers registers before reset Add horizontal scroll to Load Modules dialog Swap XMEM and YMEM for LMEM sections in IEEE-695 Close COM port if init fails 2.60 07/21/98 Fix Watch display and editing (Trap D) 2.59 07/14/98 Fix reading of the PC value (corrupted pointer) 2.58 07/10/98 Add memory space cast for WATCH (Ex.: (X:)(*(&varName+2))) 2.57 07/06/98 Fix TrapD during application reload 2.56 07/01/98 Fix LMEM loading and symbol references for IEEE-695 2.54 05/13/98 Fix near symbols for IEEE-695 2.53 05/07/98 Simple Hw break support for the BREAK command 2.52 05/06/98 Add memory COMPARE command 2.51 04/18/98 Fix decimal input conversion for 24-bit targets 2.50 04/18/98 Fix end of file display in mixed-mode for IEEE-695 (ABS) 2.48 04/16/98 Fix INPUT command processing 2.47 04/13/98 Fix segment type assignment for Tasking C 2.46 04/02/98 Fix reverse ascii display for 24-bit 2.45 04/01/98 Fix disasm of MOVEP longEA 2.38 01/16/98 Fix conditional jump (add BSCLR/BSSET to condition table) 2.36 12/15/97 Do not display data when window is minimized 2.33 11/17/97 Change color saving procedure, add GOCURS command (for alias) 2.29 10/08/97 Fix mixed mode display, memory free after cld load 2.25 09/12/97 Fix memory overwrite durin IEEE-695 load 2.21 08/18/97 Fix address parsing for INPUT/OUTPUT commands 2.20 08/05/97 Change source line processing for .abs files (IEEE-695) 2.19 05/12/97 Initialize with mono colors (override with -m to old colors) 2.17 04/29/97 Fix Tab Size setting procedure (restore on startup) 2.16 04/25/97 Fix graphics data display routine. Add graphics mode cursor (Toggled with the Insert key within data window) 2.15 04/22/97 Change scrolling proc of the DATA window in the graphics mode. 2.14 04/18/97 Modify Color Setup. Default MONO (-m) has black text on white. Add querry before saving setup on exit (enable with -x option) 2.12 04/15/97 Fix bug in source level of assembly module 2.03 03/03/97 Fix IEEE-695 debug info processing 2.01 01/10/97 Fix source level in Tasking, check for conditional jump (opcode) 1.96 01/07/97 Fix single stepping through IEEE-695 source (Tasking) 1.94 12/19/96 Do not display ERROR message if DBGINIT.CMD not found 1.93 12/16/96 Add UNTIL command - "GO address" replaces PC value 1.89 12/10/96 Add MAP command - controlled memory access 1.88 12/10/96 Fix source mode display for single line sections 1.85 11/21/96 Fix IEEE loader for "constant" directive 1.84 11/20/96 Fix symbol processing in the disassembly window. 1.83 11/18/96 Add "JUMP count", Fix "Force B" during continous trace 1.82 11/11/96 Fix symbolLoad routine (index limited to 16 bits) 1.80 10/30/96 Fix WATCH remove option 1.79 10/28/96 Fixes in WATCH window and watch processing 1.78 10/24/96 Fix memory overrun in macro command processing 1.77 10/22/96 Fix symbol processing bugs. Keep source files closed. Fix "SYMBOL name" command 1.74 09/27/96 Change from 56007 to EVM56009 1.73 09/24/96 Fix ocassional Symbol Display Menu disable 1.72 09/18/96 Fix address parsing in inline assembler 1.71 09/11/96 Fix hardware breakpoint length, empty file name in file history, Add C_STAT symols to symbol table. Fix AddWatch in Symbol Dialog 1.69 07/29/96 Fix line/address conversion in Mixed mode disassembly 1.66 07/10/96 Recompile under BC 4.53 (BC453RTL.DLL change) 1.64 07/01/96 Change Symbol Display dialog. 1.63 06/26/96 Changes for Local/Watch display (expansion of varaibles) 1.62 06/17/96 GPF during expansion of local variables addressed with the REG 1.61 06/10/96 Integrate HW Break dialogs, fix HwBrk processing for 56100 Add "load progress" for the BSO's ABS files 1.60 06/06/96 cmds REFRESH and DISPLAY reread mem. Fix STACK window display 1.59 06/04/96 Initial support for BSO's ABS files (load code & ext symbols) 1.57 04/02/96 Change format of the DSP timeout message 1.56 03/25/96 Limit data to 16/24 bits for load from OMF files Check for .hlp file in directory where .exe started Add status display during initialization In disassembly display SRX/STX h,m,l names 1.54 03/08/96 Fix loading of big sections (size > 64Kwords) 1.53 02/28/96 Do not display error message for files without a name Fix JUMP over subroutines in source mode (bug in 1.52) 1.52 02/22/96 Change ASM src level initialization procedure 1.51 02/20/96 Change file attr for loading to O_RDONLY, display error message if it can not open load file. 1.47 01/27/96 GP error during disassembly MIX mode (system init) 1.46 01/26/96 Do not add PATH to file names with subdirectory entries. 1.42 01/11/96 Fix JUMP over JSR xxx ($0d0xxx) 1.40 01/02/96 Fix "reg_read" procedure access beyond array 1.39 12/28/95 Initialization - Do not check if DSP in debug mode Change procedure checking for file extension 1.38 12/27/95 Change initialization procedure for DSP56007EVM Check if device got out of debug mode by external reset 1.37 12/16/95 Fix Peripheral Registers symbols in disassm. 1.36 12/13/95 Bug in near/far data reference (Registers Buffer). 1.35 12/12/95 Fix disassembly of MPY Speed-up MIX mode display 1.33 11/10/95 Add command line option (-Q) to disable sorting of symbols Add support for unlimited number of symbols 1.32 11/07/95 Extended timeout for 007 reset 1.30 10/15/95 Add font dialog 1.29 10/10/95 Decode symbols for TCR and TCSR registers 1.28 09/29/95 Fix OSCR bit checking (introduced with 56300 code) 1.27 09/26/95 Fix line scroll in the command window 1.25 09/05/95 Fix INPUT/OUTPUT (reg_read bug) 1.24 08/31/95 Add invalid flag for data window buffers 1.23 08/28/95 Initial release ********************************************************************** *** *** *** We would appreciate your suggestions, and please notify us of *** *** any problems. Thank You. *** *** *** *** *** *** Domain Technologies, Inc. Tel.: (972) 578-1121 *** *** 1700 Alma Dr., #245 Fax: (972) 578-1086 *** *** Plano, Texas 75075 *** *** *** *** E-mail: support@domaintec.com *** *** WWW: http://www.domaintec.com *** *** FTP: ftp://ftp.domaintec.com/domtech *** *** *** **********************************************************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.