;; elmegUsb.inf ;--------- Version Section --------------------------------------------------- [Version] Signature="$Windows 95$" Provider=%ProviderName% DriverVer=01/24/2002,1.0.3.1 ; DriverVer=mm/dd/yyyy,x.x.x.x ; If device fits one of the standard classes, use the name and GUID here, ; otherwise create your own device class and GUID as this example shows. Class=%DeviceClassName% ClassGUID={E7987250-78D6-11d4-92C6-005004681409} ;--------- SourceDiskNames and SourceDiskFiles Section ----------------------- ; These sections identify source disks and files for installation. They are ; shown here as an example, but commented out. ;[SourceDisksNames] ;1 = "Install Disk",Disk1,, ;[SourceDisksFiles] ;ElgTaLdr.sys = 1,, ;ElgTaDrv.sys = 1,, ;--------- ClassInstall/ClassInstall32 Section ------------------------------- ; Not necessary if using a standard class ; 9X Style [ClassInstall] Addreg=Class_AddReg ; NT Style [ClassInstall32] Addreg=Class_AddReg [Class_AddReg] HKR,,,,%DeviceClassName% HKR,,Icon,HEX,00,00 ;--------- DestinationDirs Section ------------------------------------------- [DestinationDirs] ElgTaLdr_Files_Driver = 10,System32\Drivers ElgTaDrv_Files_Driver = 10,System32\Drivers ;--------- Manufacturer and Models Sections ---------------------------------- [Manufacturer] %MfgName%=Mfg0 [Mfg0] ; This VID/PID is used by the elmegWIZ@RD USB-ISDN TA without Firmware ; This device is bound to the elmeg Firmware loader. The Device ; will Renumate and report as the elmegWIZ@RD USB-ISDN TA. ; %USB\VID_07E2&PID_0100.DeviceDesc%=ElgTaLdr_DDI, USB\VID_07E2&PID_0100 %USB\VID_2018&PID_0100.DeviceDesc%=ElgTaLdr_DDI, USB\VID_2018&PID_0100 ; This VID/PID is used by the elmeg C320 in BOOT Loader Mode %USB\VID_07E2&PID_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0300 %USB\VID_2018&PID_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0300 ; These devices are bound to the elmeg USB System driver. ; ; Wiz@rd %USB\VID_07E2&PID_0101.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0101 %USB\VID_2018&PID_0101.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0101 ; D@vos 24/44 %USB\VID_07E2&PID_0201.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0201 %USB\VID_2018&PID_0201.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0201 ; D@vos net %USB\VID_07E2&PID_0203.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0203 %USB\VID_2018&PID_0203.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0203 ; CS320. %USB\VID_07E2&PID_0301.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0301 %USB\VID_2018&PID_0301.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0301 ; elmeg.net %USB\VID_07E2&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0401 %USB\VID_2018&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0401 ;---------- DDInstall Sections ----------------------------------------------- ; --------- Windows 9X ----------------- ; Experimentation has shown that DDInstall root names greater than 19 characters ; cause problems in Windows 98 ; Wiz@rd Firmware Loader ; [ElgTaLdr_DDI] CopyFiles=ElgTaLdr_Files_Driver AddReg=ElgTaLdr_9X_AddReg [ElgTaLdr_9X_AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,ElgTaLdr.sys HKR, "Parameters", "BreakOnEntry", 0x00010001, 0 ; elmeg USB Driver ; [ElgTaDrv_DDI] CopyFiles=ElgTaDrv_Files_Driver AddReg=ElgTaDrv_9X_AddReg [ElgTaDrv_9X_AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,ElgTaDrv.sys HKR, "Parameters", "BreakOnEntry", 0x00010001, 0 ; --------- Windows NT ----------------- ; Wiz@rd Firmware Loader ; [ElgTaLdr_DDI.NT] //CopyFiles=@ElgTaLdr_Files_Driver AddReg=ElgTaLdr_NT_AddReg [ElgTaLdr_DDI.NT.Services] Addservice = ElgTaLdr, 0x00000002, ElgTaLdr_AddService [ElgTaLdr_AddService] DisplayName = %SvcDescLDR% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %10%\System32\Drivers\ElgTaLdr.sys [ElgTaLdr_NT_AddReg] HKLM, "System\CurrentControlSet\Services\ElgTaLdr\Parameters",\ "BreakOnEntry", 0x00010001, 0 ; ; elmeg USB Driver ; [ElgTaDrv_DDI.NT] //CopyFiles=@ElgTaDrv_Files_Driver AddReg=ElgTaDrv_NT_AddReg [ElgTaDrv_DDI.NT.Services] Addservice = ElgTaDrv, 0x00000002, ElgTaDrv_AddService [ElgTaDrv_AddService] DisplayName = %SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %10%\System32\Drivers\ElgTaDrv.sys [ElgTaDrv_NT_AddReg] HKLM, "System\CurrentControlSet\Services\ElgTaDrv\Parameters",\ "BreakOnEntry", 0x00010001, 0 ; --------- Files (common) ------------- [ElgTaLdr_Files_Driver] ElgTaLdr.sys [ElgTaDrv_Files_Driver] ElgTaDrv.sys ;--------- Strings Section --------------------------------------------------- [Strings] ProviderName="elmeg Kommunikationstechnik" MfgName="elmeg" ; USB\VID_07E2&PID_0100.DeviceDesc="elmeg WIZ@RD BootUp" USB\VID_2018&PID_0100.DeviceDesc="elmeg WIZ@RD BootUp" USB\VID_07E2&PID_0300.DeviceDesc="elmeg CS320 BootUp" USB\VID_2018&PID_0300.DeviceDesc="elmeg CS320 BootUp" ; USB\VID_07E2&PID_0101.DeviceDesc="elmeg WIZ@RD" USB\VID_2018&PID_0101.DeviceDesc="elmeg WIZ@RD" USB\VID_07E2&PID_0201.DeviceDesc="elmeg D@VOS" USB\VID_2018&PID_0201.DeviceDesc="elmeg D@VOS" USB\VID_07E2&PID_0203.DeviceDesc="elmeg D@VOS.net" USB\VID_2018&PID_0203.DeviceDesc="elmeg D@VOS.net" USB\VID_07E2&PID_0301.DeviceDesc="elmeg CS320" USB\VID_2018&PID_0301.DeviceDesc="elmeg CS320" USB\VID_07E2&PID_0401.DeviceDesc="elmeg.net" USB\VID_2018&PID_0401.DeviceDesc="elmeg.net" ; DeviceClassName="elmeg USB" SVCDESCLDR="elmeg USB Device Loader" SvcDesc="elmeg USB Device Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.