; OEMSETUP.INF file for Racore ThunderLAN(tm) NDIS2 for WFW 3.11 [disks] 1 = \mslanman.dos\drivers\ethernet\tlan,"Racore ThunderLAN(tm) Driver Disk",disk1 [data] type=network version=3.11.001 [netcard] ; key = description, MSID, type, media, mode, install, protini, style ms$tlan="Racore ThunderLAN(tm)",0,ndis,ethernet,0x05,ms$tlan,ms$tlan_nif [ms$tlan] ndis2=1:tlan.dos mlid=*:tlanodi.com [ms$tlan_nif] DRIVERNAME=TLAN$ param=DEVICEID,,static,1280,, param=VENDORID,,static,4172,, param=NETWORKADDRESS,"Netcard Address - Use quotes",chars,14,,0x2 param=SLOT,"PCI Card Slot",int,"0,8191,1",0,0x2 param=NETWORK,"Network Type",enum,"Auto Negotiate,0,10Mbit,1,100Mbit,2,10Mbit/FullDuplex,3,100Mbit/FullDuplex,4",0 param=PHYSELECT,"Network Interface",enum,"Auto Select,32,Expansion Module,0,TLAN 10BaseT,31,TLAN/BitLevel AUI,33,Non-Mangaged MII Phy,34",32Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.