Readme.txt Driver File Contents (DualSmart400.zip)

Updating a previous installation:

1.  Click the START button.
2.  Click the CONTROL PANEL option.
3.  Double-click the SYSTEM icon.
	a. If SYSTEM does not appear, click the SWITCH TO CLASSIC VIEW option in the upper left.
4.  Click the HARDWARE tab.
5.  Click the DEVICE MANAGER button.
6.  You should now see a list of your computers hardware.
7.  Click the + next to IMAGING DEVICES (if not already a - shown).
8.  Right-click MYCAM.
9.  Select UPDATE DRIVERS.
10. This will beging the driver update wizard.
11. Select the INSTALL FROM A LIST OR SPECIFIC LOCATION option.
12. Click NEXT.
13. Select SEARCH.
14. Check the box INCLUDE THIS LOCATION IN THE SEARCH.
15. Click the BROWSE button.
16. Select the downloaded folder that contains this readme.
17. Click OK.
18. Click NEXT.
19. The driver software will begin to update.
20. Click FINISH when completed.
21. You may need to restart the computer to complete installation.


New installation:

1.  Double-click the SETUP.EXE file contained in this folder.
2.  The software will begin installation.
3.  Click FINISH when software completes installation.
4.  You may need to restart the computer to complete installation.
5.  Turn the camera on and attach it to the computer.
6.  A NEW HARDWARE DETECTED message will appear.
7.  Select the INSTALL FROM A LIST OR SPECIFIC LOCATION option.
8.  Click NEXT.
9.  Select SEARCH.
10. Check the box INCLUDE THIS LOCATION IN THE SEARCH.
11. Click the BROWSE button.
12. Select the downloaded folder that contains this readme.
13. Click OK.
14. Click NEXT.
15. The driver software will begin to update.
16. Click FINISH when completed.
17. You may need to restart the computer to complete installation.


Correcting the DRIVER OPEN FAIL message after drivers have been installed:

1.  Click the START button.
2.  Click the CONTROL PANEL option.
3.  Double-click the SYSTEM icon.
	a. If SYSTEM does not appear, click the SWITCH TO CLASSIC VIEW option in the upper left.
4.  Click the HARDWARE tab.
5.  Click the DEVICE MANAGER button.
6.  You should now see a list of your computers hardware.
7.  Click the + next to OTHER DEVICES (if not already a - shown).
8.  Right-click MR97310 VGA DUAL MODE CAMERA.
9.  Select UPDATE DRIVERS.
10. This will beging the driver update wizard.
11. Select the INSTALL FROM A LIST OR SPECIFIC LOCATION option.
12. Click NEXT.
13. Select SEARCH.
14. Check the box INCLUDE THIS LOCATION IN THE SEARCH.
15. Click the BROWSE button.
16. Select the downloaded folder that contains this readme.
17. Click OK.
18. Click NEXT.
19. The driver software will begin to update.
20. Click FINISH when completed.
21. You may need to restart the computer to complete installation.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.60