1. ad2210.zip Driver
2. RelNotes.txt File Contents

RelNotes.txt Driver File Contents (ad2210.zip)

To install this application:
Run the SETUP.EXE application that's in the same directory as this file.



Release Notes

========================================================
SuperSite v1.0.5b
Date: 5/3/2002

-Minimum recommended monitor resolution for this application is 600x400.

-ALTHOUGH THIS APPLICATION WILL WORK WITH wINDOWs Xp, IT
 IS HIGHLY RECOMMENDED THAT Xp NOT BE UTILIZED WITH THIS APPLICATION/DRIVER DUE TO Xp's 
 DRIVER-SIGNING REQUIREMENTS. THIS APPLICATION UTILIZES A CUSTOM DIAGNOSTIC DRIVER THAT 
 IS NOT SIGNED. THIS REQUIRES THE USER TO MANUALLY INSTALL THE DIAGNOSTIC DRIVER FOR 
 EVERY TEST. 

-Immediately after attaching a device to be programmed, the user may be prompted to 
 by the PnP system to designate where the driver file is located. They should
 enter the "system32\drivers" directory. This directory is found under the directory where
 Windows was installed. This is typically "C:\WINDOWS" for Windows 98 or "C:\WINNT" for
 Windows 2000.
-The application only supports the Cypress CY7C68300 chip.
-This app is designed to be used with Windows 98 Second Edition and Windows 2000 Pro.
-By design, if no ".W56" EEPROM file is selected when opening the Mfg. Operations page, an 
 error message will appear stating that no file has been opened.
-This release should only be used with w56 EEPROM image files.
-The installer on the setup CD (Setup.exe) must be manually invoked. It does not Autorun.
-If the user does not designate a "serial number prefix" as prompted-for by the application,
 they will receive an error.

-This release (1.0.5b) is the same as release 1.0.5 except this file has been updated
 with information regarding use of this application under Windows Xp.

========================================================
SuperSite v1.0.5c
Date: 5/13/02
- Identical to v1.0.5b except one byte in the EEPROM contents file (*.w56) was corrected.
  Specifically, the byte at addr 0x25 was set to 0x20 in v1.0.5b. This should have been
  0x02. That error is fixed in this release.

========================================================
SuperSite v1.0.5d
Date: 5/14/02
- Identical to v1.0.5b except EEPROM contents file has changed to match (except for
  serial number) latest (5/7) release of AT2 Data Sheet.
========================================================
SuperSite v1.0.5e
Date: 5/24/02
- Same as v1.0.5d except one bit in EEPROM contents file changed to help ensure greater
  compatibility with ATAPI devices.