[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCMCIA
[Options]
WLAN11
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
PcmciaProductName = "IEEE 802.11 Wireless LAN/PC Card"
PcmciaManufacturer = " "
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
WLAN11BYTE = 0x20246D68
Manufacturer = " "
ProductMajorVersion = "2"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "WLAN11_"
ProductSoftwareTitle = "WLAN11 Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\WLAN11.sys"
NetRuleSoftwareType = "WLAN11Sys ndisDriver WLAN11Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """WLAN11Sys"" yes no container"
NetRuleSoftwareClass = {"WLAN11Driver basic"}
NetRuleSoftwareSWBindable = {"WLAN11Driver WLAN11Adapter non exclusive 100"}
OptionHelpFile = "WLAN11.hlp"
ProductHardwareName = "WLAN11_"
ProductHardwareTitle = "IEEE 802.11 Wireless LAN PC Card"
NetRuleHardwareType = "WLAN11 WLAN11Adapter"
NetRuleHardwareClass = {"WLAN11Adapter basic"}
HelpId = 20
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
PcmciaKeyName = $(!NTN_ServiceBase)"\PCMCIA\DataBase"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
HardParameterKey = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
;;; Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
;;; else
;;; set Status = STATUS_NOTSUPPORTED
;;; goto finish_ReturnOptions
;;; endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(FunctionTitle)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-ifstr(i) $(!NTN_InstallMode) == configure
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Set DLLPATH = $(SrcDir)
set IRQValueIndex = 6
set IoBaseAddrIndex = 7
set FragValueIndex = 19
set ChannelvalueIndex = 3
set AuthAlgValueIndex = 1
set NetTypeValueIndex = 1
set PSModeValueIndex = 1
set RTSValueIndex = 19
Set ESSIDValue = "ANY"
set TxRateValueIndex = 6
set WepReqValueIndex = 1
set PreambleModeValueIndex = 3
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
else
set OldVersionExisted = $(TRUE)
endif
endif
ifstr(i) $(DoCopy) == "YES"
shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
else-ifstr(i) $($R0) == STATUS_FAILED
shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
else-ifstr(i) $($R0) == STATUS_USERCANCEL
goto successful
endif
Set SrcDir = $($R1)
install "Install-Hlp"
endif
goto installproduct
configureadapter = +
Set DLLPATH = $(!STF_WINDOWSSYSPATH)\drivers
ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
endif
Shell $(UtilityInf) FindService, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != NO_ERROR
goto fatalregistry
endif
set HardParameterKey = $($R2)
CloseRegKey $($R1)
ifstr $(HardParameterKey) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(HardParameterKey) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "InterruptNumber"
set IRQValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IoBaseAddress"
set IoBaseAddrIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkType"
set NetTypeValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PSMode"
set PSModeValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "WepReq"
set WepReqValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "FragThresh"
set FragValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "TxRate"
set TxRateValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "ListenInterval"
set ListenValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "DSChannel"
set ChannelValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "RTSThresh"
set RTSValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "SSID"
set ESSIDValue = $(ValueData)
else-ifstr(i) $(ValueName) == "AuthentAlg"
set AuthAlgValueIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "PreambleMode"
set PreambleModeValueIndex = $(ValueData)
endif
EndForListDo
set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
ifstr(i) $(IRQValue) == ""
set IRQValue = *($(IRQList), 6)
endif
set IoBaseAddrValue = *($(IoBaseAddrList), ~($(IoBaseAddrValues),$(IoBaseAddrIndex)))
ifstr(i) $(IoBaseAddrValue) == ""
set IoBaseAddrValue = *($(IoBaseAddrList), 7)
endif
set NetTypeValue = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeValueIndex)))
ifstr(i) $(NetTypeValue) == ""
set NetTypeValue = *($(NetTypeList), 1)
endif
set PSModeValue = *($(PSModeList), ~($(PSModeValues),$(PSModeValueIndex)))
ifstr(i) $(PSModeValue) == ""
set PSModeValue = *($(PSModeList), 1)
endif
set WepReqValue = *($(WepReqList), ~($(WepReqValues),$(WepReqValueIndex)))
ifstr(i) $(WepReqValue) == ""
set WepReqValue = *($(WepReqList), 1)
endif
set FragValue = *($(FragList), ~($(FragValues),$(FragValueIndex)))
ifstr(i) $(FragValue) == ""
set FragValue = *($(FragList), 19)
endif
set TxRateValue = *($(TxRateList), ~($(TxRateValues),$(TxRateValueIndex)))
ifstr(i) $(TxRateValue) == ""
set TxRateValue = *($(TxRateList), 6)
endif
set ChannelValue = *($(ChannelList), ~($(ChannelValues),$(ChannelValueIndex)))
ifstr(i) $(ChannelValue) == ""
set ChannelValue = *($(ChannelList), 3)
endif
set ListenValue = *($(ListenList), ~($(ListenValues),$(ListenValueIndex)))
ifstr(i) $(ListenValue) == ""
set ListenValue = *($(ListenList), 4)
endif
set RTSValue = *($(RTSList), ~($(RTSValues),$(RTSValueIndex)))
ifstr(i) $(RTSValue) == ""
set RTSValue = *($(RTSList), 19)
endif
ifstr(i) $(ESSIDValue) == ""
Set ESSIDValue = "ANY"
endif
set AuthAlgValue = *($(AuthAlgList), ~($(AuthAlgValues),$(AuthAlgValueIndex)))
ifstr(i) $(AuthAlgValue) == ""
set AuthAlgValue = *($(AuthAlgList), 1)
endif
set PreambleModeValue = *($(PreambleModeList), ~($(PreambleModeValues),$(PreambleModeValueIndex)))
ifstr(i) $(PreambleModeValue) == ""
set PreambleModeValue = *($(PreambleModeList), 1)
endif
adapteroptions = +
set from = adapteroptions
loadlibrary "Install Diskette" $(DLLPATH)\WLAN11.dll DllHandle
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(HelpId)
EndWait
ui start "InputDlg" $(DllHandle)
StartWait
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValueIndex = $(Combo1Out)
set IoBaseAddrIndex = $(Combo2Out)
set FragValueIndex = $(Combo3Out)
set AuthAlgValueIndex = $(Combo4Out)
set NetTypeValueIndex = $(Combo5Out)
set PSModeValueIndex = $(Combo6Out)
set RTSValueIndex = $(Combo7Out)
set TxRateValueIndex = $(Combo8Out)
set WepReqValueIndex = $(Combo9Out)
set ChannelValueIndex = $(Combo10Out)
set PreambleModeValueIndex = $(Combo11Out)
set ESSIDValue = *($(EditTextOut),1)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(DllHandle)
goto end
else
ui pop 1
FreeLibrary $(DllHandle)
goto end
endif
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
set FragValue = *($(FragValues), ~($(FragList),$(FragValueIndex)))
set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
set ListenValue = *($(ListenValues), ~($(ListenList),$(ListenValueIndex)))
set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeValueIndex)))
set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateValueIndex)))
set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqValueIndex)))
set AuthAlglValue = *($(AuthAlgValues), ~($(AuthAlgList),$(AuthAlgValueIndex)))
set PreambleModeValue = *($(PreambleModeValues), ~($(PreambleModeList),$(PreambleModeValueIndex)))
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
StartWait
; Shell $(UtilityInf), EISAFindBus, $(WLAN11BYTE)
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
; ifstr $($R0) != "NO_ERROR"
; set Error = $($R0)
; goto fatal
; endif
; ifstr(i) $($R1) == {}
; set Error = $(CANNOT_FIND_ANY_CARD)
; set CommonStatus = STATUS_USERCANCEL
; set from = "end"
; goto nonfatal
; endif
; set AdapterList = $($R1)
ifint $(OldVersionExisted) == $(FALSE)
ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
else-ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
else-ifstr(i) $($R0) == STATUS_USERCANCEL
goto successful
endif
Set SrcDir = $($R1)
endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
;
; Check to see if the product Software key exists already in the system
; service keys before we try to add the software component.
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
ifstr(i) $(KeyNt) == ""
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
; ForListDo $(AdapterList)
; set BusNum = *($($),1)
; set SlotNum = *($($),2)
; Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
; $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName) "YES"
; ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; endif
; ifstr $($R0) != "NO_ERROR"
; set Error = $($R0)
; goto fatal
; endif
; ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set IRQValue = *($(IRQList),6)
set IoBaseAddrValue = *($(IoBaseAddrList),7)
set NetTypeValue = *($(NetTypeList),1)
set RTSValue = *($(RTSList),19)
set FragValue = *($(FragList),19)
set ChannelValue = *($(ChannelList),3)
set ListenValue = *($(ListenList),4)
set PSModeValue = *($(PSModeList),1)
set TxRateValue = *($(TxRateList),6)
set WepReqValue = *($(WepReqList),1)
set AuthAlgValue = *($(AuthAlgList),1)
set PreambleModeValue = *($(PreambleModeList),1)
loadlibrary "Install Diskette" $(DLLPATH)\WLAN11.dll DllHandle
read-syms FileDependentDlg$(!STF_LANGUAGE)
SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(HelpId)
EndWait
ui start "InputDlg" $(DllHandle)
StartWait
ifstr(i) $(DLGEVENT) == "CONTINUE"
set IRQValueIndex = $(Combo1Out)
set IoBaseAddrIndex = $(Combo2Out)
set FragValueIndex = $(Combo3Out)
set AuthAlgValueIndex = $(Combo4Out)
set NetTypeValueIndex = $(Combo5Out)
set PSModeValueIndex = $(Combo6Out)
set RTSValueIndex = $(Combo7Out)
set TxRateValueIndex = $(Combo8Out)
set WepReqValueIndex = $(Combo9Out)
set ChannelValueIndex = $(Combo10Out)
set PreambleModeValueIndex = $(Combo11Out)
set ESSIDValue = *($(EditTextOut),1)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "EXIT"
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(DllHandle)
goto setfailed
else
ui pop 1
FreeLibrary $(DllHandle)
goto setfailed
endif
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
set FragValue = *($(FragValues), ~($(FragList),$(FragValueIndex)))
set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
set ListenValue = *($(ListenValues), ~($(ListenList),$(ListenValueIndex)))
set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeValueIndex)))
set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateValueIndex)))
set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqValueIndex)))
set AuthAlgValue = *($(AuthAlgValues), ~($(AuthAlgList),$(AuthAlgValueIndex)))
set PreambleModeValue = *($(PreambleModeValues), ~($(PreambleModeList),$(PreambleModeValueIndex)))
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{VendorDesc,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),64},+
{PCMCIA,$(NoTitle),$(!REG_VT_DWORD),1},+
{Encapsulation,$(NoTitle),$(!REG_VT_DWORD),1},+
{EncryptInDriver,$(NoTitle),$(!REG_VT_DWORD),1},+
{DecryptInDriver,$(NoTitle),$(!REG_VT_DWORD),1},+
{IBSSInDriver,$(NoTitle),$(!REG_VT_DWORD),0},+
{WEPFactor,$(NoTitle),$(!REG_VT_DWORD),3},+
{DSChannel,$(NoTitle),$(!REG_VT_DWORD),$(ChannelValue)},+
{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
{NetworkTypeWLU11,$(NoTitle),$(!REG_VT_DWORD),0},+
{RTSThresh,$(NoTitle),$(!REG_VT_DWORD),$(RTSValue)},+
{FragThresh,$(NoTitle),$(!REG_VT_DWORD),$(FragValue)},+
{ListenInterval,$(NoTitle),$(!REG_VT_DWORD),$(ListenValue)},+
{PSMode,$(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+
{TxRate,$(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+
{WepReq,$(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+
{AuthentAlg,$(NoTitle),$(!REG_VT_DWORD),$(AuthAlgValue)},+
{PreambleMode,$(NoTitle),$(!REG_VT_DWORD),$(PreambleModeValue)},+
{SSID,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
endif
CloseRegKey $(HardParameterKey)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; endif
; EndForListDo
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) +
hKeyPcmciaDatabase
IfStr $(hKeyPcmciaDatabase) == $(hKeyNull)
Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: "$(PcmciaKeyName)
Goto fatalRegistry
EndIf
;;;
;;; Try to create the manufacturer keys in PCMCIA database,
;;; but don't fail if it's already there.
;;;
CreateRegKey $(hKeyPcmciaDatabase) {$(PcmciaManufacturer), 0, GenericClass} +
"" $(MAXIMUM_ALLOWED) "" hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaDatabase) "" $(PcmciaManufacturer) $(MAXIMUM_ALLOWED) +
hKeyPcmciaManufacturer
IfStr $(hKeyPcmciaManufacturer) == $(hKeyNull)
Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: " +
$(PcmciaKeyName)"\"$(PcmciaManufacturer)
Goto fatalRegistry
EndIf
EndIf
;;;
;;; Try to create WaveLAN PCMCIA product key under manufacturer key,
;;; but don't fail if it's already there.
;;;
CreateRegKey $(hKeyPcmciaManufacturer) { $(PcmciaProductName), 0, GenericClass } "" +
$(MAXIMUM_ALLOWED) "" hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
OpenRegKey $(hKeyPcmciaManufacturer) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) +
hKeyPcmciaProduct
IfStr $(hKeyPcmciaProduct) == $(hKeyNull)
Debug-Output $(ProductSoftwareName)": OpenRegKey failed to open: "
$(PcmciaKeyName)"\"$(PcmciaManufacturer)"\"$(PcmciaProductName)
Goto fatalRegistry
EndIf
Endif
;;;
;;; Now write the values to the registry.
;;;
Set NewValueList = {+
{DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"}, +
{Driver,$(NoTitle),$(!REG_VT_SZ), $(ProductSoftwareName)}, +
{InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)}, +
{Option,$(NoTitle),$(!REG_VT_SZ),$(Option)}+
}
Shell $(UtilityInf), AddValueList, $(hKeyPcmciaProduct), $(NewValueList)
IfInt $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output $(SWProductName)": Cannot run AddValueList: hKeyPcmciaProduct (Lucent)"
Goto ShellCodeError
EndIf
;;;;;;;;;;;;
goto successful
updateparameters =+
set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
set FragValue = *($(FragValues), ~($(FragList),$(FragValueIndex)))
set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
set ListenValue = *($(ListenValues), ~($(ListenList),$(ListenValueIndex)))
set PSModeValue = *($(PSModeValues), ~($(PSModeList),$(PSModeValueIndex)))
set TxRateValue = *($(TxRateValues), ~($(TxRateList),$(TxRateValueIndex)))
set WepReqValue = *($(WepReqValues), ~($(WepReqList),$(WepReqValueIndex)))
set AuthAlgValue = *($(AuthAlgValues), ~($(AuthAlgList),$(AuthAlgValueIndex)))
set PreambleModeValue = *($(PreambleModeValues), ~($(PreambleModeList),$(PreambleModeValueIndex)))
set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
{IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
{IoLength,$(NoTitle),$(!REG_VT_DWORD),64},+
{DSChannel,$(NoTitle),$(!REG_VT_DWORD),$(ChannelValue)},+
{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
{NetworkTypeWLU11,$(NoTitle),$(!REG_VT_DWORD),0},+
{RTSThresh,$(NoTitle),$(!REG_VT_DWORD),$(RTSValue)},+
{FragThresh,$(NoTitle),$(!REG_VT_DWORD),$(FragValue)},+
{ListenInterval,$(NoTitle),$(!REG_VT_DWORD),$(ListenValue)},+
{PSMode,$(NoTitle),$(!REG_VT_DWORD),$(PSModeValue)},+
{TxRate,$(NoTitle),$(!REG_VT_DWORD),$(TxRateValue)},+
{WepReq,$(NoTitle),$(!REG_VT_DWORD),$(WepReqValue)},+
{AuthentAlg,$(NoTitle),$(!REG_VT_DWORD),$(AuthAlgValue)},+
{PreambleMode,$(NoTitle),$(!REG_VT_DWORD),$(PreambleModeValue)},+
{SSID,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)}}
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
endif
CloseRegKey $(HardParameterKey)
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
EndWait
FreeLibrary $(DllHandle)
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Copy $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Hlp]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Copy $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "WLAN11 NDIS3 Driver"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
1, oemsetup.inf, SIZE=99999, RENAME=$(!UG_Filename)
[Files-Copy]
1,WLAN11.sys , SIZE=9999
1,WLAN11.DLL , SIZE=9999
[Files-Hlp]
1,WLAN11.hlp , SIZE=9999
[LanguagesSupported]
ENG
[OptionsTextENG]
WLAN11 = "IEEE 802.11 Wireless LAN PC Card"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareDescription = "IEEE 802.11 Wireless LAN PC Card"
FunctionTitle = "IEEE 802.11 Wireless LAN PC Card Setup"
ProductHardwareDescription = "IEEE 802.11 Wireless LAN PC Card"
IRQList = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IoBaseAddrList = ^(IoBaseAddrChoices, 1)
IoBaseAddrValues = ^(IoBaseAddrChoices, 2)
FragList = ^(FragChoices, 1)
FragValues = ^(FragChoices, 2)
ListenList = ^(ListenChoices, 1)
ListenValues = ^(ListenChoices, 2)
NetTypeList = ^(NetTypeChoices, 1)
NetTypeValues = ^(NetTypeChoices, 2)
PSModeList = ^(PSModeChoices, 1)
PSModeValues = ^(PSModeChoices, 2)
RTSList = ^(RTSChoices, 1)
RTSValues = ^(RTSChoices, 2)
TxRateList = ^(TxRateChoices, 1)
TxRateValues = ^(TxRateChoices, 2)
WepReqList = ^(WepReqChoices, 1)
WepReqValues = ^(WepReqChoices, 2)
ChannelList = ^(ChannelChoices, 1)
ChannelValues = ^(ChannelChoices, 2)
AuthAlgList = ^(AuthAlgChoices, 1)
AuthAlgValues = ^(AuthAlgChoices, 2)
PreambleModeList = ^(PreambleModeChoices, 1)
PreambleModeValues = ^(PreambleModeChoices, 2)
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "WLA"
Caption = $(Function$(Option)Title)
Combo1List = $(IRQList)
Combo1Out = $(IRQValue)
Combo2List = $(IoBaseAddrList)
Combo2Out = $(IoBaseAddrValue)
Combo3List = $(FragList)
Combo3Out = $(FragValue)
Combo4List = $(AuthAlgList)
Combo4Out = $(AuthAlgValue)
Combo5List = $(NetTypeList)
Combo5Out = $(NetTypeValue)
Combo6List = $(PSModeList)
Combo6Out = $(PSModeValue)
Combo7List = $(RTSList)
Combo7Out = $(RTSValue)
Combo8List = $(TxRateList)
Combo8Out = $(TxRateValue)
Combo9List = $(WepReqList)
Combo9Out = $(WepReqValue)
Combo10List = $(ChannelList)
Combo10Out = $(ChannelValue)
Combo11List = $(PreambleModeList)
Combo11Out = $(PreambleModeValue)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List, Combo6List, Combo7List, Combo8List, Combo9List, Combo10List, Combo11List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out, Combo6Out, Combo7Out, Combo8Out, Combo9Out, Combo10Out, Combo11Out}
EditTextLim = {32}
EditTextIn = {$(ESSIDValue)}
EditTextOut = {$(ESSIDValue)}
EditFocusOn = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(HelpId)
[IRQChoices]
IRQ_1 = " 3",3
IRQ_2 = " 4",4
IRQ_3 = " 5",5
IRQ_4 = " 7",7
IRQ_5 = " 9",9
IRQ_6 = "10",10
IRQ_7 = "11",11
IRQ_8 = "12",12
IRQ_9 = "14",14
IRQ_10 = "15",15
[IoBaseAddrChoices]
IoBase_1 = "0x100",256
IoBase_2 = "0x140",320
IoBase_3 = "0x180",384
IoBase_4 = "0x1C0",448
IoBase_5 = "0x200",512
IoBase_6 = "0x240",576
IoBase_7 = "0x280",640
IoBase_8 = "0x2C0",704
IoBase_9 = "0x300",768
IoBase_10 = "0x340",832
IoBase_11 = "0x380",896
IoBase_12 = "0x3C0",960
IoBase_13 = "0x400",1024
IoBase_14 = "0x440",1088
IoBase_15 = "0x480",1152
IoBase_16 = "0x4C0",1216
IoBase_17 = "0x500",1280
IoBase_18 = "0x540",1344
IoBase_19 = "0x580",1408
IoBase_20 = "0x5C0",1472
IoBase_21 = "0x600",1536
[TxRateChoices]
TX_1 = "Fixed 1 Mb/s" ,1
TX_2 = "Fixed 2 Mb/s" ,2
TX_3 = "Auto Select 1 or 2",3
TX_4 = "Fixed 5.5 Mb/s" ,4
TX_5 = "Fixed 11 Mb/s" ,8
TX_6 = "Fully Auto" ,15
[NetTypeChoices]
NetT_0 = "802.11 Ad-hoc",0
NetT_1 = "Infrastructure",1
NetT_2 = "Ad-Hoc",3
[RTSChoices]
RTS_1 = " 128" ,128
RTS_2 = " 256" ,256
RTS_3 = " 384" ,384
RTS_4 = " 512" ,512
RTS_5 = " 640" ,640
RTS_6 = " 768" ,768
RTS_7 = " 896" ,896
RTS_8 = "1024" ,1024
RTS_9 = "1152" ,1152
RTS_10 = "1280" ,1280
RTS_11 = "1408" ,1408
RTS_12 = "1536" ,1536
RTS_13 = "1664" ,1664
RTS_14 = "1792" ,1792
RTS_15 = "1920" ,1920
RTS_16 = "2048" ,2048
RTS_17 = "2176" ,2176
RTS_18 = "2304" ,2304
RTS_19 = "2432" ,2432
[FragChoices]
FRAG_1 = " 128" ,128
FRAG_2 = " 256" ,256
FRAG_3 = " 384" ,384
FRAG_4 = " 512" ,512
FRAG_5 = " 640" ,640
FRAG_6 = " 768" ,768
FRAG_7 = " 896" ,896
FRAG_8 = "1024" ,1024
FRAG_9 = "1152" ,1152
FRAG_10 = "1280" ,1280
FRAG_11 = "1408" ,1408
FRAG_12 = "1536" ,1536
FRAG_13 = "1664" ,1664
FRAG_14 = "1792" ,1792
FRAG_15 = "1920" ,1920
FRAG_16 = "2048" ,2048
FRAG_17 = "2176" ,2176
FRAG_18 = "2304" ,2304
FRAG_19 = "2432" ,2432
[PSModeChoices]
PSMode_1 = "Disable",1
PSMode_2 = "Enable",2
[PSLevelChoices]
PSLevel_1 = "Normal",0
PSLevel_2 = "Enhanced",1
[WepReqChoices]
WepReq_1 = "Disable",0
WepReq_2 = "Enalbe",2
WepReq_3 = "WEP128",6
[ListenChoices]
Listen_0 = " 0",0
Listen_1 = " 1",1
Listen_2 = " 2",2
Listen_3 = " 3",3
Listen_4 = " 4",4
Listen_5 = " 5",5
Listen_6 = " 6",6
Listen_7 = " 7",7
Listen_8 = " 8",8
Listen_9 = " 9",9
Listen_10 = "10",10
Listen_11 = "11",11
Listen_12 = "12",12
Listen_13 = "13",13
Listen_14 = "14",14
[ChannelChoices]
Channel_1 = " 1",1
Channel_2 = " 2",2
Channel_3 = " 3",3
Channel_4 = " 4",4
Channel_5 = " 5",5
Channel_6 = " 6",6
Channel_7 = " 7",7
Channel_8 = " 8",8
Channel_9 = " 9",9
Channel_10 = "10",10
Channel_11 = "11",11
Channel_12 = "12",12
Channel_13 = "13",13
Channel_14 = "14",14
[AuthAlgChoices]
AuthAlg_1 = "WECA Compliant",1
AuthAlg_2 = "Must use Shared with WEP",2
[PreambleModeChoices]
Preamble_1 = "Long Tx Preamble",1
Preamble_2 = "Short Tx Preamble",2
Preamble_3 = "Auto",3
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.