; FILE: simp8.ini Copyright (c), Symmetric Research, 2003-2006
;
; This is an example .ini initialization file for the PAR8CH with PARGPS.
; You should modify these values so they are appropriate for your hardware
; and application.
;
; See inisyntx.txt for a full description of the .ini syntax and keywords.
Title = "Sample PAR8CH/GPS Simp Ini"
AtodEnable = ON
AtodDriverName = SrParXch378
AtodModelName = PAR8CH
AtodPortMode = EPP ; BPP EPP ECP/BPP ECP/EPP
DataCoding = SIGNED ; Signed, Offset
SamplingRate = 50.0 ; <<< requested sampling rate
Gain = 1
ToggleLed = ON
Channel 0 = "CH00" Trigger = OFF
Channel 1 = "CH01" Trigger = ON
Channel 2 = "CH02" Trigger = ON
Channel 3 = "CH03" Trigger = ON
Channel 4 = "CH04" Trigger = ON
Channel 5 = "CH05" Trigger = ON
Channel 6 = "CH06" Trigger = ON
Channel 7 = "CH07" Trigger = ON
Channel 8 = "DGTL" Trigger = OFF
Channel 9 = "MARK" Trigger = OFF
Channel 10 = "CNTR" Trigger = OFF
DigitalEnable = ON
Digital 0 = "DIG0"
Digital 1 = "DIG1"
Digital 2 = "DIG2"
Digital 3 = "DIG3"
TriggerType = None ; None,Threshold,DigitalLevel,DigitalEdge
TriggerThreshold = 2000
TriggerDigitalLevelLine = 0
TriggerActiveLevel = High ; High, Low
TriggerDigitalEdgeLine = 0
TriggerActiveEdge = Rising ; Rising, Falling
TriggerActionSave = ON
TriggerFilesToSave = 2
TriggerActionSignal = OFF
TriggerLineToSignal = 0
TriggerLatch = OFF
OutputDirectory = "." ; "\sr\parxch\data"
OutputFileFormat = Dat ; Dat, Out
OutputFileNaming = Sequential ; Single, Sequential, Time
OutputSeqStart = 0
OutputBlocks = 4
DisplayInfo = ON
DisplayDataText = OFF ; for simp data display
GpsEnable = ON
GpsModelName = PARGPS ; PARGPS, Oncore, PcTime
GpsDriverName = SrParGps
GpsSerialPort = 2
GpsDisplayPps = ON
GpsDisplaySerial = ON
KeypressToRun = ON
ExitOnError = ON
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.