README.TXT Driver File Contents (RN303F.ZIP)

        ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
        ³                    RISE COMPUTER INC.                         ³
        ³   RN-303F PCI BUS FAST ETHERNET ADAPTERS                      ³
        ³                               SOFTWARE DRIVER SUPPORT         ³
        ³            Copyright 1995-1999 RISE COMPUTER INC.             ³
        ³                     All rights reserved.                      ³
        ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

How to Config Your PCI adapter.
-------------------------------
 1. Firstly , you must find the PCI configuration item in BIOS setup.

 2. There are some key points you must take care of.

   a).  You should know what slot your adapter plug in. You can find the
        slot number in your mother board or its operating menu.

   b).  Enable this device.

   c).  Enable "master" this item.
        The MXIC' PCI Bus Fast Ethernet adapter MUST be installed in a
        bus master PCI slot.  Refer to your system documentation to
        determine which slots support bus mastering.

   d).  You can choose what interrupt line you used in some BIOS setup.
        For MXIC' adapter, you must choice "INT A" in this item.

   e).  Choose what interrupt number you want. You can assign it in what
        interrupt you choose or in the slot number you choose.

 3. When you finish your configuration. You can run the diagnostic program
        in the driver diskette. If any problem, please contact your dealer.

NOTICE !!

        Conflict with Microsoft EMM386
        -------------------------------

        Problem:
        If there is any version of EMM386 prior to version 4.49 on the
                DOS system,  when users run MX98713 drivers for a 32-bit I/O
                read/write which will cause the system to be hang and/or reset.

        Fix:
        Use version 4.49 or higher releases of the EMM386 memory manager(
        available with MS-DOS version 6.22).
        End-users with earlier version of the EMM386 memory manager should
        contact their OEM or Microsoft for information on obtaining an
        updated EMM386 device driver.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.22