Install LAN Adapter Driver for MS LAN Manager Before installing the NDIS 2.X driver for LAN Manager, make sure the following directory/files are ready on a diskette. \LANMAN.DOS\DRIVERS\ETHERNET\AX8140\AX8140.DOS \LANMAN.DOS\DRIVERS\ETHERNET\AX8140\PROTOCOL.INI \LANMAN.DOS\DRIVERS\NIF\AX8140.NIF Install the NDIS 2.X driver for DOS . If you are installing LAN Manager for the first time, answer "Yes" when prompted for the importation of additional network drivers. This prompt appears right after completion of the workstation installation. . If LAN Manager is already installed in your hard disk, select "Add New Config" from the Configuration menu. Then, select "Other Driver". . Insert the driver diskette in Drive A and follow the instructions on the screen. The SETUP program will copy the necessary NDIS driver programs from the driver diskette into your hard disk; that is, into the LAN Manager directory. (PATH=C:\LANMAN.DOS, if install specify) . After completion of SETUP, your CONFIG.SYS file will be modified to reflect the NDIS driver programs. . Reboot your system to affect the changes.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.