CSC AK47 Controller Card Bios Update Utility. --------------------------------------------- Usage: ------ Boot the system off a clean boot diskette loading no drivers. Type "UPDATE.EXE" with any command options needed. The utility will load and scan for the card. If the card is not shown, try again with the -a:XXXX option. Once the utility is loaded press return to update the bios. When no command options are used, the utility defaults to the following values: Bios Address C800. Parity enabled. Resetwait disabled. EnableBios enabled. Command line options: --------------------- The following options can be added to the command line: -a:XXXX Where XXXX is the bios address of the AK47 card. -o:RESETWAIT Enables SCSCI reset wait for older, slow-to-spin-up drives. -o:!RESETWAIT Disables SCSI reset wait. -o:PARITY Enables SCSI parity error checking. -o:!PARITY Disables SCSI parity. -o:ENABLEBIOS Enables the SCSI Bios. -o:!ENABLEBIOS Disables the SCSI Bios. For example: UPDATE.EXE -a:C800 -o:RESETWAIT -o:!PARITY ------------------------ Corporate Systems Center 1294 Hammerwood Ave Sunnyvale CA 94089 408-734-3475Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.