Novell Netware v4.0x Installation on the AK-47 Controller (Note: with ANY SCSI controller, the automatic installation of Novell 4.0x with CD-ROM and target hard drive on the same Host adapter may hang before you finish the installation. This is caused by an interrupt conflict between the DOS ASPI manager and the Novell driver. If this occurs, follow the manual install procedure below.) Try the following automatic procedure first. If the system locks up please read the README.ALT file. 1. Create a small DOS Partition on the Hard Drive 2. Install the supplied AK-47 ASPI Driver 3. Install an ASPI compatible CD-ROM Driver 4. Reboot System 5. Load MS-DOS CD-ROM extensions (MSCDEX) 6. Change to CD-ROM drive letter 7. Type "CD\NETWARE.<Version #>\ENGLISH" <Enter> 8. Type "INSTALL" <Enter> 9. Select "INSTALL NEW NETWARE V4.0X" 10. Follow all On-Screen Prompts 11. When you get to the "Load Disk Driver" Screen, Press "<INS>" to load alternate driver Insert the AK-47 Diskette w/the NOVELL Drivers Press "<F3>" to specify the directory Type "A:\NOVELL.40X" to specify the correct directory 12. Choose AK474x.DSK Driver to load 13. Continue to Follow all On-Screen Prompts 14. NetWare installation is completedDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.