readme.txt Driver File Contents (ak47vlb_all.zip)

CSC AK47 Controller Card Dos/Windows 31 drivers.
------------------------------------------------

Driver Installation:
--------------------

For both MSDos and Windows 31 first copy the dos driver into a directory
on your hard drive. Then, edit the "CONFIG.SYS" file by typing 
"edit config.sys" at the dos C:\ prompt.

Add the following line to the top of the "CONFIG.SYS" file:

	DEVICE=C:\SCSI\AK47ASPI.SYS 

Where "C:\SCSI" is the directory where the drivers are now located.


Command line options:
---------------------

The following options can be added to the DEVICE line in your "CONFIG.SYS":

/SASI           -- use SASI type SCSI commands
/RESETWAIT      -- wait longer after SCSI reset for slow drives
/NOPARITY       -- disable SCSI bus parity checking
/PORT:xxxx      -- SCSI chip port override
/IRQ:nn         -- SCSI chip IRQ override

For example:
	DEVICE=C:\SCSI\AK47ASPI.SYS /PORT:320 /IRQ:15

------------------------
Corporate Systems Center
1294 Hammerwood Ave
Sunnyvale CA 94089
408-734-3475
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.04