1. usb-1052.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (usb-1052.exe)

Windows 2000 USB Light Pen Driver
Release 1.05.0002  01-30-03
Fastpoint Technologies, Inc.

***************************************************************************************************
***** Version History
*****
1.05.0002     Jan. 30, 2003
 - fixed blue screen at restart/shutdown
 - right click works when selected in button application

1.04.0000     Aug. 21, 2000
 - windows 2000 support.
 - new button application.

1.03.0000     Dec. 14, 1999
 - Fixes default button operation.
 - Fixes communication with button application.
 - Internal changes to assist with future support of Windows 2000.

1.02.0000     Oct. 13, 1999
 - Adds debounce of barrel switch.
 - Fixes problem with button down position when blue flood is required.
 - Fixes double flash when blue flood is required.

1.01.0002     Sept. 30, 1999
 - Fixes problem with Windows 98 Second Edition right mouse button.
 - Fixes Plug and Play problem in Windows 98 Second Edition

1.01.0001     May 8, 1999
 - Adds support for diagnostic command.


***************************************************************************************************
***** Product Support
*****

If you have any questions or experience any problems during installation, 
call your local supplier or Fastpoint Technologies, Inc., at:

Fastpoint Technologies, Inc., Customer Support: (800) 962-3900 (US & Canada)
or 1-714-484-6300

Fastpoint Technologies, Inc., Customer Support is available 8:00 a.m. to 5:00 p.m. Pacific Standard Time. 
Most problems can be resolved over the phone. Please refer to the chapter on "Troubleshooting" for more information.

You can also access Fastpoint Technologies customer support department, FAX or email at any time:

FAX: (714) 484-6350
Email: support@fastpoint.com

Please complete the Product Registration Card, and return it to us. This will register your product for warranty 
purposes and allow us to keep you informed of new products and enhancements.

Copyright (c) 1999 by Fastpoint Technologies, Inc. All rights reserved.


***************************************************************************************************
***** Procedure for updating the FastPoint USB Light Pen driver:
*****

From the Start menu, select Settings->Control Panel to bring up the Control Panel.

Select the System control panel applet.

Select the Device Manager tab.

Make sure "View devices by type" is selected.

In the device tree list, expand the branch entitled "Universal Serial Bus controllers".

Select the "FastPoint Technologies Light Pen" device and bring up it's Properties dialog box.

Select the Driver tab.

Select the "Update Driver..." button.

This will bring up the Update Device Driver Wizard.

The first wizard dialog says "This wizard searches for updated drivers for: FastPoint Technologies Light Pen". Click Next.

The next wizard dialog says "What do you want to do?" Select "Search for a better driver than the one your device is using now. (Recommended)" and then click Next.

The next wizard dialog determines where the wizard searches for the updated driver files.

If you are installing this update from a floppy disk, check only the "Floppy disk drives" check box.

If you are installing from a hard drive or network connection, select "Specify a location:" and type in the drive path or browse for the location of the LPN.INF file.

Click Next to start the search.

The next wizard dialog says "Windows is now ready to install the best driver for this device." and shows the location of the LPN.INF file. Click Next to continue.

The Light Pen calibration dialog then appears. Click OK to calibrate the light pen.

The Update Device Driver Wizard announces it has finished installing the driver. Click Finish.

The System Settings Change dialog then appears, asking "Do you want to restart your computer now?". Click Yes to restart the computer and complete the update process.