================================================================================
Funkwerk Enterprise Communications GmbH 09.06.2006
www.funkwerk-ec.com SNMP Notes
SNMP MIBs for artem ComPoint, artem Wx000, and funkwerk Wx002
================================================================================
Following MIBs are included in the firmware package:
Private MIBs:
- ARTEM-COMPOINT-BLD-MIB
- ARTEM-COMPOINT-FILTER-MIB
- ARTEM-COMPOINT-WLAN-MIB
Standard MIBs:
- RADIUS-AUTH-CLIENT-MIB
- Q-BRIDGE-MIB
- IEEE802dot11-MIB
This MIB contains the basic IEEE802dot11-MIB plus the following
extensions:
802.11a
802.11b
802.11d
802.11g
802.11h
802.11i
Parts of 802.11k
In order to compile the MIBs for your SNMP manager,
you need to have the imported MIBs listed below:
- SNMPv2-SMI
- SNMPv2-TC
- SNMPv2-CONF
- SNMP-FRAMEWORK-MIB
- RFC1155-SMI
- RFC-1212
- RFC1213-MIB
- P-BRIDGE-MIB
Documentation of the supported private MIBs and standard MIBs
is provided in folder MIB-docs.
For enterprise specific SNMPv1 trap numbers see SNMPv1-traps.txt.
--------------------------------------------------------------------------------
If you encounter any problems when installing or using this
product, or would like information about our other
artem products, please don't hesitate to contact us.
* E-Mail (Hotline): hotline@funkwerk-ec.com
* E-Mail (Service): info@funkwerk-ec.com
* Phone (Service): +49-180-300 91 91-0
* Phone (Hotline): +49-180 300 91 91-550
================================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.