1. lpn-209.exe Driver
2. Setup.ini File Contents

Setup.ini Driver File Contents (lpn-209.exe)

;*******************************************************************************
; This text file is made available to give OEM's the ability to modify the light 
; pen installation procedure.
;*******************************************************************************

[SETUP_OPTIONS]
SilentInstall = 0
RetainCalibrationData = 0

[COMPANY_INFO]
CompanyName = FastPoint Technologies, Inc.
CompanyIniVer = 1.0
CompanyIniDate = 9/16/98

[DEVICE_OPTIONS]
DeviceType = 1
DeviceModel = 1
PxlBrdType = 1
EnablePollingMode = 0
DeviceIrq = 5
DeviceIoBase = 210

[TOOLBOX_OPTIONS]
BtnsVisible = 0
TaskBarIcon = 1

[BLUE_FLOOD_OPTIONS]
FloodMethod = 3
FloodIntensity = 42

[MOUSE_OPTIONS]
Button2 = 8
Button3 = 4
DisableDrag = 0
DragLockWndSize = 0

PenBarrelAction = 3

[OTHER_OPTIONS]
PostImmediately = 0
EnablePostingMethodChange = 1
DisableMouPos = 1

[HELP_ONLY]
;*******************************************************************************
; The following are definitions for INI entries.
;*******************************************************************************
SilentInstall - If enabled the setup program will install silently.
     0 - Disabled
     1 - Enabled

RetainCalibrationData - If user is performing an update only, setup will not run
	the calibration application and it will save the current calibration information.
	This feature is currently only implemented in Windows NT.
	0 - Disabled
	1 - Enabled

DeviceType - Selects the type of device to install for.
     1 - Internal device
     2 - Communication port device
     3 - Keyboard/PS2 device

DeviceModel - Selects the light pen interface model.
   DeviceType 0 
     1 - 395_390
     2 - 380
   DeviceType 1
     3 - 795 on Comm port
     4 - 780 on Comm port
   DeviceType 2
     5 - 795 on Keyboard or PS/2 port
     6 - 780 on Keyboard or PS/2 port

PxlBrdType -
     1 - Pxl1 chip
     2 - Pxl2 chip

EnablePollingMode - Enables Polling versus interrupt mode
     0 - Device will use an IRQ
     1 - Device will poll from the light pen interface. No IRQ.

DeviceIrq - Selects the devices IRQ.
     2 to 15 - Irq value. See manual for further information.

DeviceIoBase - Selects the devices I/O base.
     110 to 3D0 - I/O value. See manual for further information.

BtnsVisible - Enables or disable the toolbox's visibility.
     0 - NOT visible
     1 - Visible

TaskBarIcon - Enables or disables the systray toolbox.
     0 - Use systray icon
     1 - Do NOT use systray icon

FloodMethod - Sets the mode for blue flood.
     0 - Disable blue flood 
     3 - Enable software blue flood
     4 - Enable hardware blue flood
     5 - Blue flood on every press

FloodIntensity - Selects the percentage of blue flood used.
     0 to 100 - Intensity percentage

Button2 - Emulation for right mouse button via keyboard
     0 - None
     8 - Alt key + pen
     4 - Ctrl key + pen
     2 - Left shift key + pen
     1 - Right shift key + pen

Button3 - Emulation for both mouse buttons via keyboard
     0 - None
     8 - Alt key + pen
     4 - Ctrl key + pen
     2 - Left shift key + pen
     1 - Right shift key + pen

DisableDrag - Enables/Disable the ability to left mouse drag with the light pen
     0 - Allow mouse drag
     1 - Disable mouse drag

DragLockWndSize - Sets the size of the driver based drag-lock window. This feature
     is pixel based. For example, setting it to 20 requires the user to move the pen
     20 pixels away from the original position before the driver will send movement
     messages.

PenBarrelAction - 
     0 - Left click
     1 - Left double click
     2 - Left drag
     3 - Right click
     4 - Right double click
     5 - Right drag
     6 - Both click
     7 - Both double click
     8 - Both drag

PostImmediately - Force the lpn driver to post each frame as they are calculated.
 This feature only applies to internal interfaces.
     1 - Enabled
     0 - Disabled

EnablePostingMethodChange - Enables the checkbox in the control panels Advance tab
 that allows the user to change the posting method. This feature is available only
 with a Pxl2 interface.
     1 - Checkbox disabled
     0 - Checkbox enabled

DisableMouPos - Disables position reporting by our moupos.exe system service.
     1 - Moupos is disabled
     0 - Moupos is enabled