< Downloading Procedure via RS232.>
1. Copy the download software in your PC. (SDL Downloader.exe)
2. Turn off the receiver.
3. Connect the PC and receiver with RS232.
The RS232 cable should be connected as follows.
PC Pin 2 - Receiver Pin 3
PC Pin 3 - Receiver Pin 2
PC Pin 5 - Receiver Pin 5
4. Run the download software. (SDL Downloader.exe)
5. Load the firmware to the download software.
6. Press start icon in the download software.
7. Turn on the receiver.
8. Wait till the downloading and flash writing procedure is finished.
(If the procedure is finished, the green LED will blink.)
9. You can enjoy the receiver now.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.