================================================================================
Funkwerk Enterprise Communications GmbH 19.07.2006
www.funkwerk-ec.com
Firmware ComPoint Industrial Release Notes 1.67
================================================================================
Access Client firmware
This firmware version V1.67 is a release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Bugfixes
WPA
- in client mode WPA-PSK connection doesn't work with all APs
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
================================================================================
Funkwerk Enterprise Communications GmbH 03.05.2006
www.funkwerk-ec.com
Firmware ComPoint Industrial Release Notes 1.66
================================================================================
Access Client firmware
This firmware version V1.66 is a release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Bugfixes
WPA
- Roaming leads to loss of WPA authentication if group key
rekeying is enabled
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
================================================================================
Funkwerk Enterprise Communications GmbH 17.08.2005
www.funkwerk-ec.com
Firmware ComPoint Industrial Release Notes 1.64
================================================================================
Access Client firmware
This firmware version V1.64 is a beta release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Generic
- bridged clients increased from 16 to 20
Wireless
- [gen-162-002]: change channels for France to ETSI channels
Bugfixes
Generic
- [gen-161-001]: passphrase chars 62 and 63 will be saved wrong
Wireless
- [gen-162-001]: some LLC frames will be send with wrong MIC
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
-----------------------------------------------------------------------------
Release Notes 1.62 07.12.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.62 is a minor release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Generic
- Improved arp cache and bridge table management.
Bugfixes
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
-----------------------------------------------------------------------------
Release Notes 1.61 15.11.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.61 is a minor release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Generic
- Set web page reload timer to 15 min.
- Improved memory management.
- Cleanup and improvements in the web interface.
Bugfixes
Wireless
- [gen160-001]: Country information (802.11d) corrected.
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
-----------------------------------------------------------------------------
Release Notes 1.60 26.10.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.60 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- Do not show the MAC of the ad-hoc cell when in ad-hoc mode, as this
information is of no use to the outside and would cause confusion
at best.
Generic
- Added workaround for Opera and Mozilla bug which resulted in not
sending the reboot command to the device, as these browsers sometimes
cached the CGIs.
- Cleanup and improvements in the web interface.
Bugfixes
Generic
- [gen-156-003]: SNMP traps were sent if traps are enabled, but SNMP
is disabled.
- [gen-156-002]: Subnet mask couldn't be changed alone.
- [gen-156-001]: Entering all WEP keys at 128 bit could lead to
WEP key configuration corruption.
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
-----------------------------------------------------------------------------
Release Notes 1.56 11.10.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.56 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- Added systemScale ("AP distance") parameter. If this parameter
is not set from the AccessPoint via "medium distribution", the
value from here is used.
- Reconnection to a WPA-enabled AccessPoint improved.
Bugfixes
Generic
- [gen-153-001]: Fixed occasional stack overflow in OS.
- [gen-153-002]: LLC packets with SNAP=0xAAAA received on the
ethernet side caused MIC failures when WPA is used.
Wireless
- [ac-152-001]: WPA Authentication sometimes failed because of old
credentials.
- [ac-153-001]: WDS packets wrongfully sent to us were accepted
and therefore caused a data loop.
- [gen-153-003]: WPA: Multicasts were sent out even if not
authenticated with an AccessPoint.
Known problems
Wireless
- Maximum transmission rate for WPA is about 250 kB/s.
-----------------------------------------------------------------------------
Release Notes 1.52 19.08.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.52 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Generic
- Added WPA passphrase description (any char, length 8-64).
- One-time WPA key generation computing time increased (only
if setting a new key).
- Send unicast ARP to AccessPoint after association respectively
after authentication if in WPA mode.
Bugfixes
Generic
- [gen150-001]: Saving the configuration with CPM was not possible.
- [gen150-002]: Ethernet frames with RFC 1042 encapsulation and
length < 0x600 weren't bridged correctly via wireless.
Wireless
- [ac-150-001]: Reassociation failed under rare conditions.
- [ac-151-001]: Reassociation with WPA was not possible.
Known problems
Wireless
- transmission rate for WPA-PSK max. 250 kBytes/s
-----------------------------------------------------------------------------------------
Release Notes 1.50 27.07.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.50 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- switch off MAC multicast filter in Hermes 2
Bugfixes
Wireless
- WEP doesn't work with packets with more then 1492 bytes
Generic
- save config leads to TCP timeout at CPM and no possbility to open a new TCP connection
Known problems
Wireless
- Transmissionrate for WAP-PSK max. 250 kBytes/s
-----------------------------------------------------------------------------------------
Release Notes 1.45 17.06.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.45 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
- send a gratuitous arp as soon as an interface comes up
- added basic SNMPv1 functionality (MIB-II SystemGroup, ColdStart Trap)
Bugfixes
- changes of nodename cleared the IP config
Known problems
Wireless
- Transmissionrate for WAP-PSK max. 250 kBytes/s
-----------------------------------------------------------------------------------------
Release Notes 1.43 13.05.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.43 is a major release for
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Bugfixes
Generic
- changes of nodename in CPM leads to switch off of the DHCP
- device is unreachable behind a router
- endless requests to the device leads to memory full and the device
hangs up
Known problems
Wireless
- Scan doesn't work in Ad-hoc mode
- Transmissionrate for WAP-PSK max. 250 kBytes/s
-----------------------------------------------------------------------------------------
Release Notes 1.41 16.04.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.41 is a major release
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Bugfixes
Ethernet
- RX polarity setting corrected
Known problems
Wireless
- Scan doesn't work in Ad-hoc mode
- Transmissionrate for WAP-PSK max. 250 kBytes/s
-----------------------------------------------------------------------------------------
Release Notes 1.40 27.02.2004
ARtem Onair ComPoint Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.40 is a major release
the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
UI
- Show wireless status
Bugfixes
Wireless
- Association to Intersil APs with SSID longer then 10 bytes
was not possible
- Ad-hoc mode works not correct
Known problems
Wireless
- Scan doesn't work in Ad-hoc mode
-----------------------------------------------------------------------------------------
Release Notes 1.37 12.02.2004
ARtem Onair ComPoint Workgroup/Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.37 is a major release
and supports the ComPoint Workgroup products CPW-b-EE and CPW-b-ES,
and the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- Additional wireless parameter: RTS threshold, load balancing,
microwave robustness, medium distribution,
multicast rate
- WPA-Personal support.
Generic
- Number of bridged clients increased from 8 to 16.
Bugfixes
none
Known problems
none
-----------------------------------------------------------------------------------------
Release Notes 1.35 22.01.2004
ARtem Onair ComPoint Workgroup/Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.35 is a minor release
and supports the ComPoint Workgroup products CPW-b-EE and CPW-b-ES,
and the ComPoint Industrial products CPI-b-E, CPI-b-EE, and CPI-b-ES*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- 802.11d support for DE, US and Fr added.
- Default value for WEP authentication changed to "open".
Generic
- Improved firmware upload performance.
User interface
- Statistic data for ethernet and wireless added.
Bugfixes
General
- [ac134-001]: Scan without AP's found crashed the ComPoint.
Known problems
none
-----------------------------------------------------------------------------------------
Release Notes 1.34 18.12.2003
ARtem Onair ComPoint Workgroup/Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.34 is a minor release
and supports the ComPoint Workgroup products CPW-b-EE and CPW-b-ES,
and the ComPoint Industrial products CPI-b-EO, CPI-b-EE, and CPI-b-ES-*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
User interface
- [gen131-001]: Added firmware type and nodename
to the Web browser's title.
- [gen041-002]: Configuration: Wireless Interface -> Transmission Rate
For better understanding the Auto Fallback labels
are now fully qualified with the supported values.
Bugfixes
Wireless
- [ac131-001]: Disabling the radio crashed the ComPoint after
reboot and login until the configuration was reset.
- [ac131-002]: Ad-Hoc mode didn't work.
General
- [bl126-001]: The bootloader's recognition and handling
of the Monitor button state had an undefinied behaviour
caused by a timing problem. As a side effect sometimes
the Monitor software was executed on reboot instead of
the firmware.
Known problems
none
-----------------------------------------------------------------------------------------
Release Notes 1.31 02.12.2003
ARtem Onair ComPoint Workgroup/Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.31 is a minor release
and supports the ComPoint Workgroup products CPW-b-EE and CPW-b-ES,
and the ComPoint Industrial products CPI-b-EO, CPI-b-EE, and CPI-b-ES-*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
Wireless
- Upgrade of 802.11b Agere Hermes-2 firmware version to 2.00.
Bugfixes
General
- [gen130-001]: Reset to factory defaults crashed the ComPoint.
Known problems
none
-----------------------------------------------------------------------------------------
Release Notes 1.30 25.11.2003
ARtem Onair ComPoint Workgroup/Industrial ARtem GmbH
Access Client AC firmware www.ARtem.de
This firmware version V1.30 is the first official release
and supports the ComPoint Workgroup products CPW-b-EE and CPW-b-ES,
and the ComPoint Industrial products CPI-b-EO, CPI-b-EE, and CPI-b-ES-*.
The firmware is shipped as one file, ARtem Firmware Package (.afw)
IMPORTANT!
Please refer to the readme1st.txt file for update instructions!
Changes
none
Bugfixes
none
Known problems
none
-----------------------------------------------------------------------------------------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.