RME Intelligent Audio Solutions Hammerfall DSP System Driver for Windows 98/SE/ME Important information: Driver version 2.431 Bug fixes: - HDSP General: ASIO Direct Monitoring did not work correctly at 88.2/96 kHz - HDSP General: ASIO Direct Monitoring was broken since version 2.40 - fixed. Changes: - HDSP General: TMS (Track Marker Support) implemented - HDSP General: New MIDI hardware: significantly reduced system load - HDSP General: ASIO Direct Monitoring can be switched off in TotalMix menu (for emagic Logic) This driver requires an update of the Hammerfall DSP system firmware. To check the current revision and to update please download the Flash Update Tool from our website: http://www.rme-audio.com/download/fut_11_104.zip Driver Installation: During the installation of the drivers point to the directory where they reside. For more detailed information see manual, found on the RME Driver-CD. Driver Update: Under System Control /System /Device Manager /Sound, Video and Game Controllers /RME Hammerfall DSP /Properties /Driver you'll find the 'Update Driver' button. Choose 'Search for a better driver' and follow the instructions on the screen. Point to the directory where these update files are located. In case Windows doesn't find one of the files during the update process use the search button to point to the directory where the update files are located. Driver files explained: hdsp.drv, hdsp.vxd: Windows hardware driver hdspset.exe: Settings dialog hdspmix.exe: TotalMix hdsp.dll: ASIO driver HDSP_Set.lnk, HDSP_Mix.lnk: Link for the desktop digibox.bin: Firmware of the Digiface I/O box multibox.bin: Firmware of the Multiface I/O box default.mix: Default setting for TotalMix default.vol: Default setting for Digiface/Multiface, as long as TotalMix wasn't started preset1.mix to 8.mix: preset files for the HDSP mixer (see manual) Copyright RME 12/2002 All rights reserved. Windows 98/SE/ME are trademarks of Microsoft Corporation. RME is a registered trademark. ASIO, Cubase and VST are trademarks of Steinberg Media Technologies AG. Gigasampler/studio is a trademark of NemeSys Music Technology, Inc.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.