===================================================================
ARtem GmbH Sept 2003
Onair Client Manager Version: 3.16
===================================================================
This README.TXT covers information that was not yet known or
available when the user documentation shipped with this product
was written. It includes update information, additional
installation instructions, limitations to the current version of
the product, and suggestions to solve known issues or problems.
TABLE OF CONTENTS.
1. SOFTWARE DESCRIPTION
2. SYSTEM REQUIREMENTS
3. NEW IN THIS RELEASE
4. INSTALLATION NOTES
5. TECHNICAL CONSTRAINTS
6. KNOWN ISSUES
7. TECHNICAL SUPPORT
-------------------------------------------------------------------
1. SOFTWARE DESCRIPTION
1.1 About this software
The ARtem Onair Client Manager is a management tool
that you can use to verify the quality of your wireless radio
connection to the Compoint network.
The Onair Communication Interface can be installed on any
computer running the MS-Windows 95, 98, ME, NT or 2000 Operating System,
that has been equipped with a Onair Comcard and the Comcard
driver version 6.41 or higher is installed.
1.2 Files Installed
The following files will be installed in the specified
directory:
* CMART.EXE Client Manager
* CMART.DLL Client Manager Language DLL
* WNARTNLS.DLL Language DLL for CPL
* CMAGSNLS.HLP Client Manager Help File
* CMAGSNLS.CNT Client Manager Contents Help File
* README.TXT this file
-------------------------------------------------------------------
2. SYSTEM REQUIREMENTS
2.1 Operating System
To install and run the Onair Communication Interface you will
need the Microsoft Windows 95, 98, ME, NT or 2000 Operating System.
2.2 Free Disk Space
The installation of the Client Manager requires a
free disk space of approximately 500 KB.
-------------------------------------------------------------------
3. NEW IN THIS RELEASE
3.1 Version 3.16 Sept 2003
- Hardware radio disable support added.
- Support for Hermes2 cards added.
- Zeroconfig under winXP can be switched off
The following problems have been solved:
- When in "Continuous data logging/once per second" mode the
duration column now shows "1" i.s.o. 60.
- When selecting add/edit profile under XP the zeroconfig
dialog will be opened.
- Problem with AP name when CM is running in German language
solved.
- When another application is using the full screen, the tray
icon is not updated anymore.
3.2 Version 2.90 Jul 2002
The following functionality has been added:
- Support added for ..51b.cpl and ..48b.cpl file under
Win2K and XP
- Support for USB Card, Variant 2
- Added error detection code for Wireless PCI Adapter Card
- Added support for multibrand inf files
- Problems with the advanced menu in the status screen solved.
(linktest was not always enabled when it should)
3.3 Version 2.58 March 2002
The following problems have been solved:
- Problem with displaying the AP name after changing the AP
name solved.
- Problem with modem icon after profile change solved.
- Problem with the empty message box in the sitemonitor when
the selected column cannot be displayed correctly solved.
- Site monitor problem under XP solved.
- Freeze button text in sitemonitor is updated in the correct
language now.
- "log" extension is fixed now.
- "txt" extension is fixed now.
3.4 Version 2.18 Okt 2001
The following functionality has been added:
- The Client Manager is split up in cmart.exe and cmart.dll
to support differnt languages. Default Language is English (ENU)
other languages are availible on request.
- In case of an installtion of a newer version of the Client Manager the
program will be stopped automaticly and re-started at the end of the
installation.
- The Compoint Manager must be installed by a seperate setup program.
- Support for 99 profiles added.
The following problems have been solved:
- Update of AP name in status dialog when running a linktest and
roaming.
3.5 Version 1.76 Mai 2001
Compared to the OCI Tool the following items
has been changed:
- The user interface has been improved. CCM and OCI
have been integrated into one CLART.EXE.
- New, clearer, icons are used to indicate the
communications quality.
- Change configuration profile (immediately).
- Function screens have been reworded and rearranged.
- Starting the Client Manager while it is already active (but as
icon on the system tray only) will bring up the Client Manager
status screen.
- The Client Manager provides functions to Disable and Enable the
Card's Radio. This status is preserved over a system
reboot / power off-on cycle.
- Help File is availible.
-------------------------------------------------------------------
4. INSTALLATION NOTES
4.1 Standard Installation
Before installation of the Onair Client Manager please remove
an old installation of the Onair Communication Manager or
of the OCI tools.
Please refer to the 'Installation Guide' that came with
your product.
The Onair Client Manager works only with a Comcard Driver
version 6.41 or higher.
The Onair Client Manager is managed via an installation wizard.
You can choose to start the installation wizard by
double-clicking the setup.exe file.
The installation wizard will automatically install the
program files in the following directory on the hard disk
of your computer:
C:\Program Files\ARtem\Onair Client Manager
Optionally you may choose to select another folder or
hard disk drive for installation of the Client Manager.
4.2 Upgrading the Client Manager
Upgrading to a new revision should be done as follows:
- Close the Client Manager Application.
- Execute the Setup programm, don't change the installation
directory.
- Follow the instructions on your screen.
- Upgrade the PC Card Driver.
4.3 Removing the Client Manager
To remove the Onair Communication Interface from your
system, proceed as follows:
- Click the "Start" button on your Windows task bar,
point to "Settings" and select "Control Panel".
- In the Control Panel window, double-click the
"Add/Remove" icon to display the "Add/Remove
Program Properties" window.
- Scroll down the list of applications in the
lower section of the "Install/Uninstall" tab, and
select the item 'Onair Client Manager'.
- Click the "Add/Remove" button, and follow the
instructions on your screen.
-------------------------------------------------------------------
5. TECHNICAL CONSTRAINTS
None.
-------------------------------------------------------------------
6. KNOWN ISSUES
None.
-------------------------------------------------------------------
7. TECHNICAL SUPPORT
7.1 Finding Information
On the ARtem Web Site you can find the most recent
device drivers, software updates and user documentation.
World Wide Web: HTTP://WWW.artem.de/service
7.2 Contact Technical Support
If you encounter problems when installing or using this
product, or would like information about our other
ARtem products, please contact us .
* E-Mail (Hotline): techsupp@Artem.de
* E-Mail (Service): info@Artem.de
* Phone (Service): +49-731-1516-311
* Phone (Hotline): +49-731-1516-211
===================================================================
END OF FILE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.