Diamond FIRE GL 4000 Drivers for Alpha based NT 4.0
-----------------------------------------------------
Diamond Multimedia Release 0298
Windows NT 4.0 Installation Notes
----------------------------------
1. Once you have confirmed that you are running in Standard VGA, place the
FIRE GL 4000 Windows NT Driver Diskette into the floppy drive
or the CD in your CD drive.
2. Open the Windows NT Control Panel.
3. Select the Display icon.
4. Select Change Display Type.
5. Select Change.
6. Select Other.
7. Type:
<CD-drive>:\Install\Graphic\Fire4000\alpha\NT4\disk1
or confirm that the Driver Diskette is in A: (or change the
drive letter if the driver diskette is in another drive).
8. You will then be prompted to change your system configuration.
Select Yes.
9. When prompted to install Current or New drivers, select the New option.
10. Confirm the source path.
11. You need to restart Windows NT 4.0 for the changes to take effect.
Note that the default resolution that installed is 640x480x256 60Hz.
From this point on, you can change your resolution/color depth by
using the Display Icon in the Control Panel. Select the
"List All Modes" button. This will display all resolutions and
refresh rates available. Please use the Test option so that you
can confirm that the selected refresh rate and resolution are
supported by your monitor.
=======================================================================
Diamond Multimedia Systems, Inc. (c) 1998
All Rights Reserved
=======================================================================
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.