C O M P A Q (R) C O M P U T E R C O R P O R A T I O N
Compaq Integrated Ultra ATA-100 Dual Channel Driver
1. INTRODUCTION
This file contains the manual driver installation and component installer
instructions for the Compaq Integrated Ultra ATA-100 Dual Channel Driver.
2. MANUAL DRIVER INSTALLATION
If you are installing the Compaq Integrated Ultra ATA-100 Dual Channel
Driver for the first time, follow these instructions:
1. If you have not already done so, copy all of the extracted Compaq
Integrated Ultra ATA-100 Dual Channel Driver files to a disk which we
will refer to as the Driver Disk.
2. Insert the Windows NT CD to begin the installation process.
3. When Windows NT Setup displays the message "Setup is inspecting your
computer's hardware configuration...," press F6. This prevents Windows
NT Setup from performing disk controller detection and allows you to
install the driver from the Driver Disk you created.
4. When Windows NT Setup displays the message "Setup could not
determine the type of one or more mass storage devices installed in
your system, or you have chosen to manually specify an adapter,"
press S to display a list of supported SCSI host adapters.
5. Select Other from the bottom of the list.
6. Insert the Driver Disk you made when prompted to do so, and select
"Compaq Integrated Ultra ATA-100 Dual Channel Controller" from the list.
7. Press Enter and continue the installation of Windows NT.
-----------------------------------------------------------------------------
Copyright © 2001, Compaq Computer Corporation. All rights reserved.
Product names mentioned herein may be trademarks and/or registered trademarks
of their respective companies.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.