************************************************************ * * * Production Version Releases * * Intelr Extreme Graphics 2 Driver * Microsoft Windows* 2000 * Microsoft Windows* XP * Driver Revision: 6.14.10.3606 * Package: 17331 * * Production Version 13.3.0.3606 * * * July 31, 2003 * * NOTE: This document refers to systems containing the * following Intel chipsets: * * Intel(R) 855GM Chipset * Intel(R) 865G Chipset * Intel(R) 852GM Chipset * Intel(R) 855GME Chipset * Intel(R) 852GME Chipset * * * * Installation Information * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used, and what information may be disclosed to * others. Please read the Disclaimer section and contact * your Intel field representative if you would like more * information. * ************************************************************ ************************************************************ * DISCLAIMER: Intel is making no claims of usability, * efficacy or warranty. The INTEL SOFTWARE LICENSE * AGREEMENT contained herein completely defines the license * and use of this software. * * This document contains information on products in the * design phase of development. The information here is * subject to change without notice. Do not finalize a * design with this information. ************************************************************ ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. System Requirements 2. Localized Language Abbreviations 3. Installing the Software 4. Verifying Installation of the Software 5. Identifying the Software Version Number 6. Uninstalling the Software 7. Installation Switches Available ************************************************************ * 1. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain one of the following Intel Chipsets: Intel(R) 855GM Chipset Intel(R) 865G Chipset Intel(R) 852GM Chipset Intel(R) 855GME Chipset Intel(R) 852GME Chipset 2. The software should be installed on systems with at least 128 MB of system memory. 3. There should be sufficient hard disk space in the <TEMP> directory on the system in order to install this software. The drivers included with this distribution package are designed to function with all released versions of Microsoft Windows 2000 and Microsoft Windows XP. Please check with your system provider to determine the operating system and Intel Chipset used in your system. ************************************************************ * 2. LOCALIZED LANGUAGE ABBREVIATIONS ************************************************************ The following list contains the abbreviations of all languages into which the driver has been localized. You may have to refer to this section while using this document. ara -> Arabic - Saudi Arabian arb -> Arabic - Lebanon chs -> Mainland Chinese cht -> Traditional Chinese csy -> Czechoslovakian dan -> Danish deu -> German ell -> Greek eng -> International English enu -> English esp -> Spanish fin -> Finnish fra -> French frc -> French Canadian heb -> Hebrew hun -> Hungarian ita -> Italian jpn -> Japanese kor -> Korean nld -> Dutch nor -> Norwegian plk -> Polish ptb -> Brazilian Portuguese ptg -> Portuguese rus -> Russian sve -> Swedish tha -> Thai trk -> Turkish ************************************************************ * 3. INSTALLING THE SOFTWARE ************************************************************ General Installation Notes: 1. The operating system must be installed prior to the installation of the driver. 2. This installation procedure is specific only to the version of driver and installation file included in this release. 3. This procedure assumes that all of the software associated with this release is located in the same directory. MANUAL "HAVE-DISK" INSTALLATION INSTRUCTIONS -------------------------------------------- To install from a Web download, you will download either a ZIP file or an EXE file from the Web. a. If it is an EXE file, double-click the file you downloaded and specify a location into which the driver files will be extracted. Click "Unzip" and the files will extract. Click "OK" on the next window, then click "Close". b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or PKZip*. Microsoft Windows* 2000 Installation Instructions ------------------------------------------------- 1. Right click on "My Computer" icon and then click on "properties". 2. Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING DRIVER GO TO STEP 3B) 3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4) 3b. Select "Display adapters". Double click on the graphics controller shown. 4. Click on "driver" tab and select "Update Driver". 5. Click on the "Next" button. 6. Select the following option: "Display a list of the known drivers for this device...". Click on the "Next" button. (NOTE: IF UPDATING DRIVER GO TO STEP 8) 7. Select "Display adapters". Click on the "Next" button. 8. Click on the "Have Disk..." button and then the "Browse" button. 9. Enter the directory where you unzipped the file you downloaded, and then enter the "Graphics" subdirectory. Next enter the "Win2000" subdirectory. Highlight the "ialmnt5.INF" file. Click on the "Open" button. 10. Click on the "OK" button. A window listing all of the available display types should open. Select the display adapter that your system contains and then click on the "Next" button. 11. Click on the "Next" button. The operating system will install the driver. Click on the "Finish" button when done. 12. Click on the "Close" button and then click on the "Yes" button to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. Microsoft Windows* XP Installation Instructions ----------------------------------------------- 1. Click "Start" then right click on "My Computer" icon and then click on properties. 2. Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING DRIVER GO TO STEP 3B) 3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4) 3b. Select "Display adapters" then Double click on the graphics controller shown. 4. Click on "driver" tab and select "Update Driver". 5. Select the following option: "Install from a list or specific location (Advanced)". Click on the "Next" button. 6. Select the following option: "Don't search. I will choose the driver to install". Click on the "Next" button. (NOTE: IF UPDATING DRIVER GO TO STEP 8) 7. Select "Display adapters". Click on the "Next" button. 8. Click on the "Have Disk..." button and then the "Browse" button. 9. Enter the directory where you unzipped the file you downloaded, and then enter the "Graphics" subdirectory. Next enter the "Win2000" subdirectory. Highlight the "ialmnt5.INF" file. Click on the "Open" button. 10. Click on the "OK" button. A window listing all of the available display types should open. Select the display adapter that your system contains and then click on the "Next" button. 11. Click on the "Next" button. The operating system will install the driver. Click on the "Finish" button when done. 12. Click on the "Close" button and then click on the "Yes" button to reboot. The driver should now be loaded. To determine if the driver has been loaded correctly, refer to the Verifying Installation section below. AUTOMATED INSTALL USING SETUP.EXE --------------------------------- 1. To install from a Web download, you will download either a ZIP file or an EXE file from the Web. a. If it is an EXE file, double-click the file you downloaded and specify a location into which the driver files will be extracted. Click "Unzip" and the files will extract. Click "OK" on the next window, then click "Close". b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or PKZip*. 2. Click the 'Start' button in the task bar, click 'Run' and then select 'Setup.exe' from the hard drive directory where the driver files are stored. The Install dialog will appear. 3. click 'Next' to continue. 4. Read License Agreement and click Yes to proceed. 5. When the 'Setup COMPLETE' message appears click 'Finish' to restart your computer. Setup install switches are listed in section 7 below. ************************************************************ * 4. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ 1. Double Click on the "My Computer" icon, then double click on the "Control Panel" icon, and then double click on the "System" icon. 2. Click on "Hardware" Tab and select "device manager". Click on the "Display Adapters" icon. The Intel Graphics Driver should be listed. If not, the driver is not installed correctly. To check the version of the driver, refer to the section below. ************************************************************ * 5. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 1. Double Click on the "My Computer" icon, then double click on the "Control Panel" icon, and then double click on the "Display" icon. 2. Select the "Settings" tab and then click on the "Advanced" button. 3. Select the "Intel(R) Extreme Graphics" tab. The graphics driver version should be listed on this screen. ************************************************************ * 6. UNINSTALLING THE SOFTWARE ************************************************************ NOTE: This procedure assumes the above installation process was successful. This uninstallation procedure is specific only to the version of the driver and installation files included in this package. 1. Click on the "My Computer" icon, then click on the "Control Panel" icon, and then click on the "Add/Remove Programs" icon. 2. Select Intel(R) Extreme Graphics Driver Software 3. Click the "Remove" button to uninstall the driver. ************************************************************ * 7. INSTALLATION SWITCHES AVAILABLE ************************************************************ The switches in the SETUP.EXE file will have the following syntax. Switches are not case sensitive and may be specified in any order (except for the -s switch). Switches must be separated by spaces. SETUP [-b] [-g{xx[x]}] [ [ -nocuidlg{xxxx}, [-nocuidlg{xxxx}]...] | -nodiag | -basic] [-overwrite] [-nolic] [-bits x x_pixels x y_pixels x vert_refresh] [-l{lang_value}] [-s] [-f2<path\logfile>] GFX-INSTALL CUSTOMER SWITCHES -b Forces a system reboot after the installation completes. In non-silent mode, the absence of this switch will prompt the user to reboot. In silent mode, the absence of this switch forces the Setup.exe to complete without rebooting (the user must manually reboot to conclude the installation process). -g{xx[x]} Forces the configuration of a specific language version of the driver during the install. The absence of this switch will cause the installation to utilize the language of the OS locale as its default. -nocuidlg{xxxx} Suppresses the display of a specific CUI dialog. This switch may be used multiple times to suppress many dialogs on a single command line invocation. The absence of this switch means that CUI dialogs will be displayed as specified in the INF -nodiag Suppresses the display of all CUI dialogs and CUI tabs on the OS Display Property pages and disables the Intel Graphics Technology Control Panel Applet. The absence of this switch means that CUI dialogs will be displayed as specified in the INF. Note: this switch functionality is different from the PC4.0 -nodiag switch functionality. The PC4.0 -nodiag switch is functionally equivalent to the current "-basic" switch (below). -basic Suppresses the display of all advanced CUI dialogs. The absence of this switch means that advanced CUI dialogs will be displayed as specified in the INF. -overwrite Installs the graphics driver regardless of the version of previously installed driver. In non-silent mode, the absence of this switch will prompt the user to confirm overwrite of a newer Intel Graphics driver. In silent mode, the absence of this switch means that the installation will abort any attempts to regress the revision of the Intel(R) Extreme Graphics driver. -nolic Suppresses the display of the license agreement screen. In non-silent mode, the absence of this switch will only prompt the user to view and accept the license agreement. The functionality of this switch is automatically included during silent installations. -[bits per pixels] x [x_pixels] x [y_pixels] x [vert_refresh]. Sets the four default display parameters: bits per pixel, pixels per line,pixels per column and vertical refresh rate. For example: If you want 16 bits per pixel, 1024 pixels per line, 768 pixels per column and a vertical refresh rate of 75Hz, you would input the follow at the command line "-16x1024x768x75". INSTALLSHIELD* STANDARD SWITCHES -l{lang_value} The switch provided by InstallShield* specifies the language used for the Gfx-Install user interface. The absence of this switch will cause the installation to utilize the language of the OS as its default. Detailed requirements for the Install Dialog language settings are given in the Install Dialog Language section. -s Run in silent mode. The absence of this switch causes the install to be performed in verbose mode. -f2<path\logfile> Specifies an alternate location and name of the log file created by a silent install. By default, Setup.log log file is created and stored during a silent install in the same directory as that of Setup.ins. ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT * (OEM/IHV Distribution & Single User) ************************************************************ IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the “Software”) until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: a) If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies; b) If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. --------------------------------------------------------- For OEMs, IHVs, and ISVs: LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to You a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel’s copyrights to: a) use, modify and copy Software internally for Your own development and maintenance purposes; and b) modify, copy and distribute Software, including derivative works of the Software, to Your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software. If You are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then You may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to Your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to You directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect Your relevant records to verify Your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If You wish to have a third party consultant or subcontractor ("Contractor") perform work on Your behalf which involves access to or use of Software, You shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, You shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. --------------------------------------------------------- EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the “Software”) until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: 1.This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 2.You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3.You may not reverse engineer, decompile, or disassemble the Software. 4.You may not sublicense or permit simultaneous use of the Software by more than one user. 5.The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed “license.txt” file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMIHV/RBK/November 4, 1998 ************************************************************ ************************************************************ * DISCLAIMER ************************************************************ Intel is making no claims of usability, efficacy or warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained herein completely defines the license and use of this software. ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life-sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Other names and brands may be claimed as the property of others. Copyright (c) Intel Corporation, 1998-2002Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.